journal article·2017-11

Post-mortem analysis on LiFePO4|Graphite cells describing the evolution & composition of covering layer on anode and their impact on cell performance

Meinert Lewerenz, Alexander Warnecke, Dirk Uwe Sauer

Publisher page

Abstract

Abstract During cyclic aging of lithium-ion batteries the formation of a μm-thick covering layer on top of the anode facing the separator is found on top of the anode. In this work several post-mortem analyses of cyclic aged cylindrical LFP|Graphite cells are evaluated to give a detailed characterization of the covering layer and to find possible causes for the evolution of such a layer. The analyses of the layer with different methods return that it consists to high percentage of plated active lithium, deposited Fe and products of a solid electrolyte interphase (SEI). The deposition is located mainly in the center of the cell symmetrical to the coating direction. The origin of these depositions is assumed in locally overcharged particles, Fe deposition or inhomogeneous distribution of capacity density. As a secondary effect the deposition on one side increases the thickness locally; thereafter a pressure-induced overcharging due to charge agglomeration of the back side of the anode occurs. Finally a compact and dense covering layer in a late state of aging leads to deactivation of the covered parts of the anode and cathode due to suppressed lithium-ion conductivity. This leads to increasing slope of capacity fade and increase of internal resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Postmortem analysis of calendar-aged graphite/LiFePO4 cells10.1016/j.jpowsour.2013.01.147 ↗
2. Systematic aging of commercial LiFePO4jGraphite cylindrical cells including a theory explaining rise of capacity during aging10.1016/j.jpowsour.2017.01.133 ↗
3. Introduction of capacity difference analysis (CDA) for analyzing lateral lithium-ion flow to determine the state of covering layer evolution10.1016/j.jpowsour.2017.04.043 ↗
4. Uneven film formation across depth of porous graphite electrodes in cycled commercial Li-Ion batteries10.1021/jp509665e ↗
5. Non-uniform aging of cycled commercial LiFePO4//graphite cylindrical cells revealed by post-mortem analysis10.1016/j.jpowsour.2014.01.105 ↗
6. Electrochemical characterization and post-mortem analysis of aged LiMn2O4eLi(Ni0.5Mn0.3Co0.2)O2/graphite lithium ion batteries. Part I: cycle aging10.1016/j.jpowsour.2013.11.080 ↗
7. Differential voltage analysis as a tool for analyzing inhomogeneous aging: a case study for LiFePO4|Graphite cylindrical cells10.1016/j.jpowsour.2017.09.059 ↗
8. Overcharge effect on morphology and structure of Carbon electrodes for lithium-ion batteries10.1149/2.jes035205 ↗
9. Lithium plating in a commercial lithium-ion battery - a low-temperature aging study10.1016/j.jpowsour.2014.11.065 ↗
10. Material and design options for avoiding lithium plating during charging10.1149/1.3414003 ↗
11. The effects of defects on localized plating in lithium-ion batteries10.1149/2.1051507jes ↗
12. https://www.webelements.com, (n.d.). https://www.webelements.com.
13. Gefahrstoffdatenbank (GESTIS), (n.d.). http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index.jsp.
14. New method evaluating currents keeping the voltage constant for fast and high resolved measurement of Arrhenius relation and capacity fade10.1016/j.jpowsour.2017.03.136 ↗
15. Degradation mechanisms of the graphite Electrode in C 6/LiFePO 4 batteries unraveled by a non-destructive approach10.1149/2.0821614jes ↗
16. Schmalstieg · 2017