journal article·2017-10

A modeling comparison between a two-stage and three-stage cascaded thermoelectric generator

Eurydice Kanimba, Matthew Pearson, Jeff Sharp, David Stokes, Shashank Priya, Zhiting Tian

Publisher page

Abstract

Abstract In this work, a comparison between the performance of two- and three-stage cascaded thermoelectric generator (TEG) devices is analyzed based on a prescribed maximum hot side temperature of 973 K, an imposed maximum heat input of 505 W, and a fixed cold side temperature of 473 K. Half-Heusler is used as a thermoelectric (TE) material in the top higher temperature stage and skutterudite as a TE in the bottom lower temperature stage for the two-stage structure. Lead telluride is added in the middle stage to form the three-stage structure. Based on the prescribed constraints, the two-stage cascaded TEG is found to produce a power output of 42 W with an efficiency of 8.3%. The three-stage cascaded TEG produces a power output of 51 W with an efficiency of 10.2%. The three-stage cascaded TEG produces 21% more power than the two-stage does; however, if the system complexity, mechanical robustness, manufacturability, and/or cost of three-stage cascaded TEG outweigh the 21% percent power production increase, the two-stage TEG could be preferable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Enhanced thermoelectric figure of merit of p-type half-Heuslers10.1021/nl104138t ↗
2. Enhancement in thermoelectric figure-of-merit of an N-Type half-heusler compound by the nanocomposite approach10.1002/aenm.201100126 ↗
3. Numerical simulation, parametric study and optimization of thermoelectric generators for self-cooling of devices
4. Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules10.1039/C5EE02979A ↗
5. Development of high efficiency segmented thermoelectric unicouples
6. Multi-objective and multi-parameter optimization of two-stage thermoelectric generator in electrically series and parallel configurations through NSGA-II10.1016/j.energy.2015.08.044 ↗
7. Modeling of sectional and multi-stage thermoelectric modules as waste heat recuperators. Journal of electrical engineering
8. Design and analysis of a cascaded thermoelectric generator
9. Design of cascaded oxide thermoelectric generator10.2320/matertrans.MRA2008085 ↗
10. Thermoelectric efficiency and compatibility10.1103/PhysRevLett.91.148301 ↗
11. n-Type skutterudites (R, Ba, Yb) yCo 4 Sb 12 (R= Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈ 2.010.1016/j.actamat.2013.09.039 ↗
12. Structures and thermoelectric properties of double-filled (Ca x Ce 1−x) Fe 4 Sb 12 skutterudites10.1016/j.jssc.2014.06.042 ↗
13. Application of the compatibility factor to the design of segmented and cascaded thermoelectric generators10.1063/1.1689396 ↗
14. Design and numerical evaluation of cascade-type thermoelectric modules10.1007/s11664-012-2400-3 ↗
15. Thermodynamic analyses and optimization for thermoelectric devices: the state of the arts10.1007/s11431-015-5970-5 ↗
16. Scalable thermoelectric (TE) device technologies for power generation
17. Analysis of the internal heat losses in a thermoelectric generator10.1016/j.ijthermalsci.2014.06.003 ↗
18. Lead telluride as a thermoelectric material for thermoelectric power generation10.1016/S0921-4526(02)01187-0 ↗
19. Schmitz · 2013
20. A numerical model and comparative investigation of a thermoelectric generator with multi-irreversibilities10.1016/j.energy.2011.03.057 ↗
21. Evaluation of thermoelectric modules for power generation10.1016/S0378-7753(97)02801-2 ↗