Improved electrochemical performances of Li-rich nickel cobalt manganese oxide by partial substitution of Li + by Mg 2+
Source abstract
Abstract
Li-rich nickel cobalt manganese oxide (NCM) materials with partial substitution of lithium by magnesium is synthesized by the Pechini process. Different synthesized Li100-2xMgx-NCM materials (x = 0, 1, 2.5, 5, and 10) are investigated by X-ray diffraction (XRD), neutron diffraction, and scanning electron microscopy to determine the role of Mg in the structure and its impact on the morphology and electrochemical properties. The chemical composition, crystal structure, and particle morphology are compared with those of the reference (x = 0) material. Mg substitution has a significant impact on the electrochemical properties. In comparison with the reference sample, the x = 1 sample exhibits a mitigation of the voltage drop owing to more stable structure during cycling, leading to a specific discharge of 210 mAh g−1 after 100 cycles at C/10 rate. However, compositions with x ≥ 2.5 exhibit larger voltage drop in discharge, due to the faster formation of a spinel-like structure during cycling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Recent progress in Li-rich layered oxides as cathode materials for Li-ion batteries10.1039/C4RA12454E ↗
2. Layered lithium insertion material LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
3. Interpreting the structural and electrochemical complexity of 0.5Li2MnO3·0.5LiMO2 electrodes for lithium batteries (M = Mn0.5-xNi0.5-xCo2x, 0 ≤ x ≤ 0.5)10.1039/B618715C ↗
4. Li2MnO3-stabilized LiMO2 (M= Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
5. Mechanism associated with the “plateau” observed at high voltage for the overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 system10.1021/cm070435m ↗
6. Differential electrochemical mass spectrometry study of the interface of xLi2MnO3·(1-x)LiMO2 (M= Ni, Co, and Mn) material as a positive electrode in li-ion batteries10.1021/cm502201z ↗
7. Understanding the anomalous capacity of Li/Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 cell using in situ X-ray diffraction and electrochemical studies10.1149/1.1480014 ↗
8. Advances in manganese-oxide “composite” electrodes for lithium-ion batteries10.1039/b417616m ↗
9. Understanding long-term cycling performance of Li1.2Ni0.15Mn0.55Co0.1O2-graphite lithium-ion cells10.1149/2.002305jes ↗
10. Surface phenomena of high energy Li(Ni1/3Co1/3Mn1/3)O2/graphite cells at high temperature and high temperature and high cutoff voltages10.1016/j.jpowsour.2014.07.051 ↗
11. Reducing mass transfer effects on the kinetics of 5V HE-NCM electrode materials for Li-ion batteries10.1149/2.067405jes ↗
12. Unraveling the voltage-fade mechanism in high-energy-density lithium-ion batteries: origin of the tetrahedral cations for spinel conversion10.1021/cm5031415 ↗
13. Manganese on graphite anode and capacity fade in Li ion batteries10.1021/jp507833u ↗
14. Nanoscale morphological and chemical changes of high voltage lithium manganese rich NMC composite cathode with cycling10.1021/nl502090z ↗
15. Development of microstrain in aged lithium transition metal oxides10.1021/nl5022859 ↗
16. Surface/interface study on full xLi2MnO3·(1-x)LiMO2 (M= Ni, Mn, Co)/Graphite cells10.1149/2.0491507jes ↗
17. Bulk and surface analyses of ageing of a 5V-NCM positive electrode material for lithium-ion batteries10.1039/c3ta13112b ↗
18. Role of alumina on Li-Ni-Co-Mn-O particles as positive electrode material for lithium-ion batteries10.1021/cm050566s ↗
19. Studies of Li and Mn-rich Lix[MnNiCo]O2 electrodes: electrochemical performance, structure, and the effect of the aluminum fluoride coating10.1149/2.091311jes ↗
20. Synthesis and electrochemical performance of phosphate-coated porous LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries10.1016/j.electacta.2013.09.071 ↗
21. Surface modifications of electrode materials for lithium-ion batteries: status and trends10.1007/s11581-014-1131-2 ↗
22. In situ polyaniline modified cathode material Li [Li0.2Mn0.54Ni0.13Co0.13]O2 with high rate capacity for lithium ion batteries10.1039/C4TA04024D ↗
23. Improving high-capacity Li1.2Ni0.15Mn0.55Co0.1O2-based lithium-ion cells by modifying the positive electrode with alumina10.1016/j.jpowsour.2013.01.082 ↗
24. Enhanced electrochemical performance of LiF-modified LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries10.1016/j.jpowsour.2012.10.065 ↗
25. Inorganic additives for passivation of high voltage cathode materials, Inorganic additive for passivation of high voltage cathode materials10.1016/j.jpowsour.2010.09.093 ↗
26. Mitigation performance degradation of high-capacity lithium-ion cells with boronate-based electrolyte additives10.1149/2.0081410jes ↗
27. Substituted dioxaphosphinane as an electrolyte additive for high voltage lithium-ion cells with overlithiated layered oxide10.1149/2.100404jes ↗
28. Improvement of high voltage cycling performance and thermal stability of lithium-ion cells by use of a thiophene additive10.1016/j.elecom.2009.08.012 ↗
29. Improved synthesis of a highly fluorinated boronic ester as dual functional additive for lithium-ion batteries10.1016/j.jpowsour.2010.09.110 ↗
30. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
31. Excellent rate capability of Mg doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 cathode material for lithium-ion battery10.1016/j.electacta.2014.05.043 ↗
32. Influence of Ru substitution on Li-rich 0.55Li2MnO3·0.45LiNi1/3Co1/3Mn1/3O2 cathode for Li-ion batteries10.1016/j.electacta.2012.06.118 ↗
33. The effects of the Mo doping on 0.3Li[Li0.33Mn0.67]O2 cathode material10.1039/c2dt11833e ↗
34. Layered Li(Li0.2Ni0.15+0.5zCo0.10Mn0.55-0.5z)O2-zFz cathode materials for Li-ion secondary batteries10.1016/j.jpowsour.2005.03.152 ↗
35. NMR evidence of LiF coating rather than fluorine substitution in Li(Ni0.425Mn0.425Co0.15)O210.1016/j.jssc.2008.09.002 ↗
36. Synthesis of “Li1.1(Ni0.425Mn0.425Co0.15)0.9O1.8F0.2” materials by different routes: is there fluorin substitution by oxygen?10.1149/1.3080659 ↗
37. Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.12Ni01Mn0.54]O2 cathode material10.1039/c3ta12296d ↗
38. Mitigation of layered spinel conversion of a Li-rich layered metal oxide cathode material for li-ion batteries10.1149/2.040403jes ↗
39. K+-doped Li1.2Mn0.54Co0.13Ni0.13O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries10.1021/am5017649 ↗
40. PO43- polyanion-doping for stabilizing Li-rich layered oxides as cathode materials for advanced lithium-ion batteries10.1039/C4TA00699B ↗
41. The effect of polyanion-doping on the structure and electrochemical performance of Li-rich layered oxides as cathode for lithium-ion batteries10.1149/2.1031509jes ↗
42. Effect of magnesium doping on properties of lithium-rich layered oxide cathodes based on a one-step co-precipitation strategy10.1039/C6TA00370B ↗
43. Magnesium-doped Li1.2[Co0.13Ni0.13Mn0.54]O2 for lithium-ion battery cathode with enhanced cycling stability and rate capability
44. Revised effective ionic radii and systematic studies of interatomic distances on halides and chalcogenides10.1107/S0567739476001551 ↗
45. A review on the problems of the solid state ions diffusion in cathodes for rechargeable Mg batteries10.1007/s10832-007-9370-5 ↗
46. Countering voltage decay and capacity fading of lithium-rich cathode material at 60°C by hybrid surface protection layers10.1002/aenm.201500274 ↗
47. Fully activated Li2MnO3 nanoparticles by oxidation reaction10.1039/c2jm30962a ↗
48. Different oxygen redox participation for bulk and surface: a possible global explanation for the cycling mechanism of Li1.20Mn0.54Co0.13O210.1016/j.jpowsour.2013.02.075 ↗
49. Insight unto the atomic structure of cycled lithium-rich layered oxide Li1.20Mn0.54Co0.13O2 using HAADF and electron nanodiffraction10.1021/jp509388j ↗
50. Study of the lithium-rich integrated compound xLi2MnO3·(1-x) LiMO2 (x around 0.5; M = Mn, Ni, Co; 2:2:1) and its electrochemical activity as positive electrode lithium cells10.1149/2.070302jes ↗
51. The origin of electrochemical activity in Li2MnO310.1039/b207945c ↗
52. Toward low-cost, high energy density Li2MnO3 cathode materials10.1039/C4TA02924K ↗
53. Fe content effects on electrochemical properties of Fe-substituted Li2MnO3 positive electrode material10.1016/j.jpowsour.2009.08.059 ↗