journal article·2017-02Open access

SSH2S: Hydrogen storage in complex hydrides for an auxiliary power unit based on high temperature proton exchange membrane fuel cells

Marcello Baricco, Mads Bang, Maximilian Fichtner, Bjorn Hauback, Marc Linder, Carlo Luetto, Pietro Moretto, Mauro Sgroi

Abstract

The main objective of the SSH2S (Fuel Cell Coupled Solid State Hydrogen Storage Tank) project was to develop a solid state hydrogen storage tank based on complex hydrides and to fully integrate it with a High Temperature Proton Exchange Membrane (HT-PEM) fuel cell stack. A mixed lithium amide/magnesium hydride system was used as the main storage material for the tank, due to its high gravimetric storage capacity and relatively low hydrogen desorption temperature. The mixed lithium amide/magnesium hydride system was coupled with a standard intermetallic compound to take advantage of its capability to release hydrogen at ambient temperature and to ensure a fast start-up of the system. The hydrogen storage tank was designed to feed a 1 kW HT-PEM stack for 2 h to be used for an Auxiliary Power Unit (APU). A full thermal integration was possible thanks to the high operation temperature of the fuel cell and to the relative low temperature (170 °C) for hydrogen release from the mixed lithium amide/magnesium hydride system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. 2015
2. Auxiliary power unit based on a solid oxide fuel cell and fuelled with diesel10.1016/j.jpowsour.2005.10.036 ↗
3. A techno-economic comparison of fuel processors utilizing diesel for solid oxide fuel cell auxiliary power units10.1016/j.jpowsour.2010.09.011 ↗
4. Techno-economic analysis of fuel cell auxiliary power units as alternative to idling10.1016/j.jpowsour.2006.01.083 ↗
5. Impacts assessment and trade-offs of fuel cell-based auxiliary power units Part I: system performance and cost modeling10.1016/j.jpowsour.2004.07.023 ↗
6. Impacts assessment and tradeoffs of fuel cell based auxiliary power units Part II. Environmental and health impacts, LCA, and multi-objective optimization10.1016/j.jpowsour.2004.07.024 ↗
7. Conceptual design and selection of a biodiesel fuel processor for a vehicle fuel cell auxiliary power unit10.1016/j.jpowsour.2004.12.076 ↗
8. BIOFEAT: biodiesel fuel processor for a vehicle fuel cell auxiliary power unit: study of the feed system10.1016/j.jpowsour.2004.12.059 ↗
9. Development and design of experiments optimization of a high temperature proton exchange membrane fuel cell auxiliary power unit with onboard fuel processor10.1016/j.jpowsour.2011.07.034 ↗
10. A review of high-temperature polymer electrolyte membrane fuel-cell (HT-PEMFC)-based auxiliary power units for diesel-powered road vehicles10.1016/j.jpowsour.2016.02.033 ↗
11. Hydrogen-based PEM auxiliary power unit10.1016/j.ijhydene.2008.12.029 ↗
12. HT-PEM fuel cell system with integrated complex metal hydride storage tank
13. Coupling and thermal integration of a solid oxide fuel cell with a magnesium hydride tank10.1016/j.ijhydene.2013.01.140 ↗
14. Using metal hydride H2 storage in mobile fuel cell equipment: design and predicted performance of a metal hydride fuel cell mobile light10.1016/j.ijhydene.2014.07.069 ↗
15. Performance of electric forklift with low-temperature polymer exchange membrane fuel cell power module and metal hydride hydrogen storage extension tank10.1016/j.jpowsour.2016.03.058 ↗
16. Complex hydrides for hydrogen storage - new perspectives10.1016/j.mattod.2014.02.013 ↗
17. Complex hydrides for hydrogen storage10.1021/cr0501846 ↗
18. Complex and liquid hydrides for energy storage10.1007/s00339-016-9881-5 ↗
19. Thermal coupling of a high temperature PEM fuel cell with a complex hydride tank10.1016/j.ijhydene.2009.02.041 ↗
20. Ternary imides for hydrogen storage10.1002/adma.200400571 ↗
21. Towards a viable hydrogen storage system for transportation application10.1016/j.jallcom.2005.01.131 ↗
22. Reaction steps in the Li-Mg-N-H hydrogen storage system10.1016/j.jallcom.2006.12.060 ↗
23. Additive effects of LiBH4 and ZrCoH3 on the hydrogen sorption of the Li-Mg-N-H hydrogen storage system10.1021/jp307775d ↗
24. Improved hydrogen storage performance of the LiNH2-MgH2-LiBH4 system by addition of ZrCo hydride10.1016/j.ijhydene.2010.05.095 ↗
25. Comparison of the material degradation rate measurements using different approaches on example of Li-Mg-N-H system
26. Zienkiewicz · 2005
27. 2016
28. Material properties and empirical rate equations for hydrogen sorption reactions in 2 LiNH2-1.1-MgH2-0.1-LiBH4-3 wt.% ZrCoH310.1016/j.ijhydene.2014.02.120 ↗
29. Additive effects of LiBH4 and ZrCoH3 on the hydrogen sorption of the Li-Mg-N-H hydrogen storage system10.1021/jp307775d ↗
30. Considerations on the H2 desorption process for a combination reactor based on metal and complex hydrides10.1016/j.ijhydene.2015.03.136 ↗
31. Optimization of hydrogen charging process parameters for an advanced complex hydride reactor concept10.1016/j.ijhydene.2014.08.100 ↗
32. Numerical investigation of hydrogen charging performance for a combination reactor with embedded metal hydride and coolant tubes10.1016/j.ijhydene.2015.03.060 ↗
33. Storage of hydrogen in the pure form