journal article·2016-11Open access

Lithium-ion capacitors using carbide-derived carbon as the positive electrode – A comparison of cells with graphite and Li4Ti5O12 as the negative electrode

Taina Rauhala, Jaan Leis, Tanja Kallio, Kai Vuorilehto

Abstract

The use of carbide-derived carbon (CDC) as the positive electrode material for lithium-ion capacitors (LICs) is investigated. CDC based LIC cells are studied utilizing two different negative electrode materials: graphite and lithium titanate Li4Ti5O12 (LTO). The graphite electrodes are prelithiated before assembling the LICs, and LTO containing cells are studied with and without prelithiation. The rate capability and cycle life stability during 1000 cycles are evaluated by galvanostatic cycling at current densities of 0.4–4 mA cm−2. The CDC shows a specific capacitance of 120 F g−1 in the organic lithium-containing electrolyte, and the LICs demonstrate a good stability over 1000 charge-discharge cycles. The choice of the negative electrode is found to have an effect on the utilization of the CDC positive electrode during cycling and on the specific energy of the device. The graphite/CDC cell delivers a maximum specific discharge energy of 90 Wh kg−1 based on the total mass of active material in the cell. Both the prelithiated and non-prelithiated LTO/CDC cells show a specific energy of around 30 Wh kg−1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. General properties of electrochemical capacitors
2. Panasonic · 2012
3. Technologies · 2014
4. Carbide-derived carbons - from porous networks to nanotubes and graphene10.1002/adfm.201002094 ↗
5. Carbide-derived carbons as capacitor materials
6. Porosity development along the synthesis of carbons from metal carbides10.1016/j.micromeso.2007.10.046 ↗
7. Electrical double layer characteristics of nanoporous carbon derived from titanium carbide10.1016/j.electacta.2005.06.024 ↗
8. An asymmetric hybrid nonaqueous energy storage cell10.1149/1.1383553 ↗
9. Characteristics and performance of 500 F asymmetric hybrid advanced supercapacitor prototypes10.1016/S0378-7753(02)00491-3 ↗
10. A comparative study of Li-ion battery, supercapacitor and nonaqueous asymmetric hybrid devices for automotive applications10.1016/S0378-7753(02)00718-8 ↗
11. Li4Ti5O12/poly(methyl)thiophene asymmetric hybrid electrochemical device10.1016/j.jpowsour.2003.07.015 ↗
12. Power-ion battery: bridging the gap between Li-ion and supercapacitor chemistries10.1016/j.jpowsour.2004.05.023 ↗
13. Advanced energy storage device: a hybrid BatCap system consisting of battery–supercapacitor hybrid electrodes based on Li4Ti5O12–activated-carbon hybrid nanotubes10.1039/c2jm32841k ↗
14. Hybridization of electrochemical capacitors and rechargeable batteries: an experimental analysis of the different possible approaches utilizing activated carbon, Li4Ti5O12 and LiMn2O410.1016/j.jpowsour.2011.07.032 ↗
15. “Nanohybrid capacitor”: the next generation electrochemical capacitors10.1002/fuce.201000041 ↗
16. Second generation “nanohybrid supercapacitor”: evolution of capacitive energy storage devices10.1039/c2ee21675b ↗
17. Activated carbons derived from coconut shells as high energy density cathode material for Li-ion capacitors10.1038/srep03002 ↗
18. Zero-strain insertion material of Li[Li1/3Ti5/3]O4 for rechargeable lithium cells10.1149/1.2048592 ↗
19. An advanced hybrid electrochemical capacitor that uses a wide potential range at the positive electrode10.1149/1.2349495 ↗
20. High-energy density graphite/AC capacitor in organic electrolyte10.1016/j.jpowsour.2007.11.101 ↗
21. Evaluation of lithium-ion capacitors assembled with pre-lithiated graphite anode and activated carbon cathode10.1016/j.electacta.2012.01.076 ↗
22. On the use of soft carbon and propylene carbonate-based electrolytes in lithium-ion capacitors10.1149/2.050208jes ↗
23. On the cycling stability of lithium-ion capacitors containing soft carbon as anodic material10.1016/j.jpowsour.2013.04.045 ↗
24. Considerations about the influence of the structural and electrochemical properties of carbonaceous materials on the behavior of lithium-ion capacitors10.1016/j.jpowsour.2014.05.024 ↗
25. Li-ion capacitors with carbon cathode and hard carbon/stabilized lithium metal powder anode electrodes10.1016/j.jpowsour.2012.04.033 ↗
26. Strategies to optimize lithium-ion supercapacitors achieving high-performance: cathode configurations, lithium loadings on anode, and types of separator10.1016/j.jpowsour.2014.06.090 ↗
27. The effect of lithium loadings on anode to the voltage drop during charge and discharge of Li-ion capacitors10.1016/j.jpowsour.2015.01.102 ↗
28. Pre-lithiation design and lithium ion intercalation plateaus utilization of mesocarbon microbeads anode for lithium-ion capacitors10.1016/j.electacta.2015.09.074 ↗
29. Composite of mesocarbon microbeads/hard carbon as anode material for lithium ion capacitor with high electrochemical performance10.1016/j.jelechem.2015.03.035 ↗
30. Different types of pre-lithiated hard carbon as negative electrode material for lithium-ion capacitors10.1016/j.electacta.2015.11.055 ↗
31. Cycle performance of lithium-ion capacitors using graphite negative electrodes at different pre-lithiation levels10.1016/j.est.2015.05.005 ↗
32. Hybridization of rechargeable batteries and electrochemical capacitors: principles and limits10.1016/j.electacta.2012.03.151 ↗
33. Activated graphene as a cathode material for Li-ion hybrid supercapacitors10.1039/c2cp00017b ↗
34. Peculiarities and requirements of asymmetric capacitor devices based on combination of capacitor and battery-type electrodes10.1016/j.jpowsour.2004.03.021 ↗
35. The design of alternative nonaqueous high power chemistries10.1007/s00339-005-3420-0 ↗
36. Nonaqueous lithium-ion capacitors with high energy densities using trigol-reduced graphene oxide nanosheets as cathode-active material10.1002/cssc.201300465 ↗
37. A hybrid supercapacitor fabricated with a carbon nanotube cathode and a TiO2–B nanowire anode10.1002/adfm.200500937 ↗
38. On the use of activated carbon as a quasi-reference electrode in non-aqueous electrolyte solutions10.1016/j.jelechem.2009.09.007 ↗
39. Electrochemical double layer capacitor and lithium-ion capacitor based on carbon black10.1016/j.jpowsour.2011.06.019 ↗
40. Surface and structural stabilities of carbon additives in high voltage lithium ion batteries10.1016/j.jpowsour.2012.11.038 ↗
41. Electrochemical activity of carbon blacks in LiPF6-based organic electrolytes10.1016/j.jpowsour.2013.07.033 ↗
42. Phase diagram of LixC610.1103/PhysRevB.44.9170 ↗
43. Insertion electrode materials for rechargeable lithium batteries10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
44. Surface structural disordering in graphite upon lithium intercalation/deintercalation10.1016/j.jpowsour.2009.12.034 ↗
45. Real-time stress measurements in lithium-ion battery negative-electrodes10.1016/j.jpowsour.2012.01.036 ↗
46. High energy density electrochemical capacitors without consumption of electrolyte10.1149/1.3121564 ↗
47. Li insertion into Li4Ti5O12 (Spinel), Charge capability vs. particle size in thin-film electrodes10.1149/1.1581262 ↗
48. Evidence of two-phase formation upon lithium insertion into the Li1.33Ti1.67O4 spinel10.1149/1.1391692 ↗
49. Structural and electrochemical characteristics of Li4/3Ti5/3O4 as an anode material for rechargeable lithium batteries10.1023/A:1004170009354 ↗
50. The importance of the electrode mass ratio in a Li-ion capacitor based on activated carbon and Li4Ti5O1210.1016/j.jpowsour.2015.02.079 ↗