journal article·2016-10Open access

Glass-ceramic sealant for solid oxide fuel cells application: Characterization and performance in dual atmosphere

A.G. Sabato, G. Cempura, D. Montinaro, A. Chrysanthou, M. Salvo, E. Bernardo, M. Secco, F. Smeacetto

Abstract

A glass-ceramic composition was designed and tested for use as a sealant in solid oxide fuel cell (SOFC) planar stack design. The crystallization behaviour was investigated by calculating the Avrami parameter (n) and the activation energy for crystallization (Ec) was obtained. The calculated values for n and Ec were 3 and 413.5 kJ/mol respectively. The results of thermal analyses indicate that this composition shows no overlap between the sintering and crystallization stages and thus an almost pore-free sealant can be deposited and sintered at 850 °C in air for 30 min. A gas tightness test has been carried out at 800 °C for 1100 h in dual atmosphere (Ar-H2 and air) without recording any leakage. Morphological and crystalline phase analyses were conducted prior and following tests in dual atmospheres in order to assess the compatibility of the proposed sealant with the metallic interconnect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. EG&G Technical service, Inc · 2004
2. Shingal · 2003
3. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
4. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
5. Sealing technology for SOFCs10.1111/j.1744-7402.2007.02128.x ↗
6. Sealants for solid oxide fuel cells10.1016/j.jpowsour.2005.05.002 ↗
7. Novel silver/mica multilayer compressive seals for solid oxide fuel cells: the effect of thermal cycling and material degradation on leak behaviour10.1557/JMR.2003.0313 ↗
8. Seal glass for solid oxide fuel cells10.1016/j.jpowsour.2010.06.003 ↗
9. Alluminosilicate-based sealants for SOFCs and other electrochemical applications- A brief review10.1016/j.jpowsour.2013.05.099 ↗
10. Glass–ceramic seal to join Crofer 22 APU alloy to YSZ ceramic in planar SOFCs10.1016/j.jeurceramsoc.2007.05.006 ↗
11. Novel glass-ceramic composition as sealant for SOFCs10.1111/jace.13219 ↗
12. Galliosilicate glasses for viscous sealants in solid oxide fuel cell stacks: Part I: compositional design10.1016/j.ijhydene.2013.09.121 ↗
13. Bi-layer glass-ceramic sealant for solid oxide fuel cells10.1016/j.jeurceramsoc.2013.11.012 ↗
14. Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h10.1016/j.matlet.2013.08.025 ↗
15. Compressive mica seals for SOFC applications10.1016/S0378-7753(01)00811-4 ↗
16. Study of crystallisation kinetics in glasses along the diopside-Ca-Tschermak join10.1111/j.1551-2916.2008.02495.x ↗
17. Effect of strontium-to-calcium ratio on the structure, crystallization behavior and functional properties of diopside-based glasses10.1016/j.ijhydene.2013.12.104 ↗
18. Thermal and mechanical stability of lanthanide-containing glass–ceramic sealants for solid oxide fuel cells10.1039/C3TA13196C ↗
19. Alkali effect on the electrical stability of solid oxide fuel cell sealing glass10.1149/1.3275744 ↗
20. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: thermal cycle stability and chemical compatibility10.1016/j.jpowsour.2010.11.020 ↗
21. Accuracy of XRPD QPA using the combined Rietveld–RIR method10.1107/S002188989901643X ↗
22. Correction of intensities for preferred orientation in powder diffractometry: application of the March model10.1107/S0021889886089458 ↗
23. Evaluation of glass-forming tendency by means of DTA10.1007/BF01690134 ↗
24. Glass structure and glass properties
25. Variation of peak temperature with heating rate in differential thermal analysis10.6028/jres.057.026 ↗
26. Kinetic study on non-isothermal crystallization of glass by thermal analysis
27. Kinetics of non-isothermal crystallization10.1016/0032-3861(71)90041-3 ↗
28. Christian · 1965
29. Crystallization kinetic of glass particles prepared from a mixture of coal ash and soda-lime cullet glass10.1016/j.jnoncrysol.2003.09.048 ↗
30. Variation of Avrami parameter during non-isothermal surface crystallization of glass powders with different sizes10.1016/j.jnoncrysol.2012.04.003 ↗
31. Thermal and devitrification behavior of CaO-Ga2O-SiO2 glasses10.1016/S0955-2219(00)00005-4 ↗
32. Crystallization behaviour of glass-ceramic sealant for solid oxide fuel cells10.1016/j.matlet.2014.11.128 ↗
33. The application of differential thermal analysis to the study of isothermal and non-isothermal crystallization kinetics of coal fly ash based glasses10.1016/j.jnoncrysol.2009.01.023 ↗
34. Fast sintered gehlenite glass-ceramics from plasma-vitrified municipal solid waste incinerator fly ashes10.1111/j.1551-2916.2008.02892.x ↗
35. High temperature oxidation/corrosion behaviour of metals and alloys under a hydrogen gradient10.1016/j.ijhydene.2006.08.056 ↗
36. Oxidation behavior of coated and preoxidized ferritic steel in single and dual atmosphere exposures at 800 °C10.1016/j.surfcoat.2011.09.054 ↗
37. Interaction of sealing material mica with interconnect steel for solid oxide fuel cells application at 600 °C10.1016/j.jpowsour.2011.02.086 ↗