journal article·2012-01

The fabrication of high-aspect-ratio micro-flow channels on metallic bipolar plates using die-sinking micro-electrical discharge machining

Jung-Chung Hung, Dyi-Huey Chang, Yin Chuang

Publisher page

Abstract

Abstract This study explores the feasibility of using a relatively rapid technique, die-sinking micro-electrical discharge machining, to fabricate miniature metallic bipolar plates. The flow field is a three-pass serpentine structure, of which both the rib and channel widths are 500 μm and the channel depth is 600 μm (aspect ratio = 1.2) in a reaction area of 20 mm × 20 mm. The material-removal rate of the proposed method can reach up to 7.2 mm 3 min −1 . However, a high material-removal rate also increases the surface roughness of flow channels. In single-cell tests, the peak power densities are 674 mW cm −2 and 647 mW cm −2 for flow channels with a surface roughness of 0.715 μm Ra and 0.994 μm Ra, respectively. Though the increase in surface roughness lowers cell performance, the effect is not statistically significant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Hermann · International Journal of Hydrogen Energy · 2005 · 30 · 129710.1016/j.ijhydene.2005.04.016 ↗
2. Matsuura · Journal of Power Sources · 2006 · 161 · 7410.1016/j.jpowsour.2006.04.064 ↗
3. Muammer · Journal of Power Sources · 2007 · 172 · 72510.1016/j.jpowsour.2007.05.089 ↗
4. Hahn · Journal of Power Sources · 2004 · 131 · 7310.1016/j.jpowsour.2004.01.015 ↗
5. Kuriyama · Journal of Power Sources · 2008 · 145-146 · 354
6. Meyers · Journal of Power Sources · 2002 · 109 · 7610.1016/S0378-7753(02)00066-6 ↗
7. Zhang · Electrochemistry Communications · 2007 · 9 · 136510.1016/j.elecom.2007.01.051 ↗
8. Yu · Journal of Power Sources · 2003 · 124 · 4010.1016/S0378-7753(03)00618-9 ↗
9. Park · Journal of Power Sources · 2006 · 162 · 36910.1016/j.jpowsour.2006.06.077 ↗
10. Davies · Journal of Power Sources · 2000 · 86 · 23710.1016/S0378-7753(99)00524-8 ↗
11. Wang · Journal of Power Sources · 2003 · 115 · 24310.1016/S0378-7753(03)00023-5 ↗
12. Wang · Journal of Power Sources · 2010 · 195 · 479610.1016/j.jpowsour.2010.02.050 ↗
13. Wind · Journal of Power Sources · 2002 · 105 · 25610.1016/S0378-7753(01)00950-8 ↗
14. Lee · Journal of Power Sources · 2005 · 145 · 36210.1016/j.jpowsour.2005.01.082 ↗
15. Lee · Journal of Power Sources · 2008 · 185 · 111510.1016/j.jpowsour.2008.07.087 ↗
16. Lee · Journal of Power Sources · 2007 · 171 · 14810.1016/j.jpowsour.2006.11.043 ↗
17. Rajurkar · CIRP Annals - Manufacturing Technology · 2006 · 55 · 64310.1016/j.cirp.2006.10.002 ↗
18. Hung · Journal of Power Sources · 2011 · 196 · 207010.1016/j.jpowsour.2010.10.001 ↗
19. Aricò · Journal of Power Sources · 2000 · 91 · 20210.1016/S0378-7753(00)00471-7 ↗
20. Tüber · Journal of Power Sources · 2004 · 131 · 17510.1016/j.jpowsour.2003.11.078 ↗
21. He · Journal of Power Sources · 2010 · 195 · 156110.1016/j.jpowsour.2009.09.052 ↗