journal article·2015-11

Vapor-phase polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT) on commercial carbon coated aluminum foil as enhanced electrodes for supercapacitors

Linyue Tong, Kenneth H. Skorenko, Austin C. Faucett, Steven M. Boyer, Jian Liu, Jeffrey M. Mativetsky, William E. Bernier, Wayne E. Jones

Publisher page

Abstract

Abstract Laminar composite electrodes are prepared for application in supercapacitors using a catalyzed vapor-phase polymerization (VPP) of 3,4-ethylenedioxythiophene (EDOT) on the surface of commercial carbon coated aluminum foil. These highly electrically conducting polymer films provide for rapid and stable power storage per gram at room temperature. The chemical composition, surface morphology and electrical properties are characterized by Raman spectroscopy, scanning electron microscopy (SEM), and conducting atomic force microscopy (C-AFM). A series of electrical measurements including cyclic voltammetry (CV), charge–discharge (CD) and electrochemical impedance spectroscopy are also used to evaluate electrical performance. The processing temperature of VPP shows a significant effect on PEDOT morphology, the degree of orientation and its electrical properties. The relatively high temperature leads to high specific area and large conductive domains of PEDOT layer which benefits the capacitive behavior greatly according to the data presented. Since the substrate is already highly conductive, the PEDOT based composite can be used as electrode materials directly without adding current collector. By this simple and efficient process, PEDOT based composites exhibit specific capacitance up to 134 F g−1 with the polymerization temperature of 110 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Materials for electrochemical capacitors10.1038/nmat2297 ↗
2. Nanostructured transition metal oxides for aqueous hybrid electrochemical supercapacitors10.1007/s00339-005-3401-3 ↗
3. Electrochemical capacitors utilising transition metal oxides: an update of recent developments10.1039/c1ra00664a ↗
4. Preparation and characterization of flexible asymmetric supercapacitors based on transition-metal-oxide nanowire/single-walled carbon nanotube hybrid thin-film electrodes10.1021/nn100856y ↗
5. A review of electrode materials for electrochemical supercapacitors10.1039/C1CS15060J ↗
6. Conducting-polymer-based supercapacitor devices and electrodes10.1016/j.jpowsour.2010.06.084 ↗
7. Conducting polymers-based electrochemical supercapacitors—progress and prospects10.1016/j.electacta.2012.09.116 ↗
8. High specific capacitance conducting polymer supercapacitor electrodes based on poly (tris (thiophenylphenyl) amine)10.1039/b916666a ↗
9. Design and tailoring of the nanotubular arrayed architecture of hydrous RuO2 for next generation supercapacitors10.1021/nl061576a ↗
10. Electrochemical characterization of hydrous ruthenium oxide thin-film electrodes for electrochemical capacitor applications10.1149/1.2147406 ↗
11. Conway · 1999
12. Graphene-conducting polymer nanocomposite as novel electrode for supercapacitors10.1016/j.jpowsour.2010.11.002 ↗
13. Flexible supercapacitors based on cloth-supported electrodes of conducting polymer nanowire array/SWCNT composites10.1039/c1jm13722k ↗
14. Multilayered nanoarchitecture of graphene nanosheets and polypyrrole nanowires for high performance supercapacitor electrodes10.1021/cm101132g ↗
15. Poly(ethylenedioxythiophene) (PEDOT) as polymer electrode in redox supercapacitor10.1016/j.electacta.2004.02.055 ↗
16. Direct synthesis of porous NiO nanowall arrays on conductive substrates for supercapacitor application10.1016/j.jssc.2011.01.019 ↗
17. Electrochemical characteristics of two-dimensional nano-structured MnO2 for symmetric supercapacitor10.1016/j.electacta.2012.09.081 ↗
18. Formation of 1D poly (3, 4-ethylenedioxythiophene) nanomaterials in reverse microemulsions and their application to chemical sensors10.1002/adfm.200600106 ↗
19. Fabrication of highly conductive poly (3, 4-ethylenedioxythiophene) films by vapor phase polymerization and their application in efficient organic light-emitting diodes10.1002/adma.200700614 ↗
20. Quality dependence of vapor phase-polymerized poly (3, 4-ethylenedioxythiophene) nanofilm on substrate pre-treatment methods10.1166/jnn.2014.10077 ↗
21. Study of the thermal reduction of graphene oxide and of its application as electrocatalyst in quasi-solid state dye-sensitized solar cells in combination with PEDOT10.1016/j.electacta.2013.08.064 ↗
22. Hybrid supercapacitor materials from poly (3, 4-ethylenedioxythiophene) conformally coated aligned carbon nanotubes10.1016/j.electacta.2013.08.191 ↗
23. The morphology of poly (3, 4-ethylenedioxythiophene)10.1080/15583724.2010.495440 ↗
24. Self-assembly and crystalline growth of poly (3, 4-ethylenedioxythiophene) nanofilms10.1002/adma.200602163 ↗
25. Vapor-phase polymerization of nanofibrillar poly (3, 4-ethylenedioxythiophene) for supercapacitors10.1021/nn405595r ↗
26. Temperature dependent conductivity of vapor-phase polymerized PEDOT films10.1016/j.synthmet.2013.05.033 ↗
27. Effects of iron (III) p-toluenesulfonate hexahydrate oxidant on the growth of conductive poly (3, 4-ethylenedioxythiophene)(PEDOT) nanofilms by vapor phase polymerization10.1016/j.synthmet.2011.04.036 ↗
28. Vapor phase polymerization of poly (3, 4-ethylenedioxythiophene) on flexible substrates for enhanced transparent electrodes10.1016/j.synthmet.2011.03.024 ↗
29. Oxidative chemical vapor deposition of electrically conducting poly (3, 4-ethylenedioxythiophene) films10.1021/ma060113o ↗
30. Fabrication of free-standing multilayered graphene and poly (3, 4-ethylenedioxythiophene) composite films with enhanced conductive and mechanical properties10.1021/la101698j ↗
31. Vapor phase polymerization of pyrrole and thiophene using iron (III) sulfonates as oxidizing agents10.1021/ma049365k ↗
32. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
33. Systematic control of the electrical conductivity of poly (3, 4-ethylenedioxythiophene) via oxidative chemical vapor deposition10.1021/ma0628477 ↗
34. All-textile flexible supercapacitors using electrospun poly (3, 4-ethylenedioxythiophene) nanofibers10.1016/j.jpowsour.2010.07.007 ↗
35. Solid-state supercapacitors based on pulse polymerized poly (3, 4-ethylenedioxythiophene) electrodes and ionic liquid gel polymer electrolyte10.1149/2.047210jes ↗