journal article·2018-10

Optimization of glucose concentration and glucose/yeast ratio in yeast microbial fuel cell using response surface methodology approach

Marcelinus Christwardana, Domenico Frattini, Grazia Accardo, Sung Pil Yoon, Yongchai Kwon

Publisher page

Abstract

Abstract In this work the influence of two practical parameters, i.e. glucose concentration and glucose/yeast ratio, on performance of yeast-based microbial fuel cells (yeast-MFC) is investigated. The novel carbon felt pretreated with polyethylenimine is adopted as anode in open-air single chamber yeast-MFCs. The combination of the two parameters is optimized using response surface methodology with statistical approach. The optional presence of methylene blue as mediator is also included for comparison. Experimental dataset is initially built as reference and 4 mathematical equations are derived to predict the response regarding open circuit voltage (OCV) and maximum power density (MPD). By varying glucose concentration and glucose/yeast ratio, computed response surfaces show different responses are obtained and an optimum point exists within the range investigated. Finally, the optimized combinations for yeast-MFCs with/without mediator are predicted and response is verified in real experiment. The model tends to slightly overestimate the response, but accuracy is within confident range for both OCV and MPD. In fact, MPD obtained for the optimized yeast-MFC without mediator is 340.9 mW m−2, 3.2% lower than model, while it is 374.4 mW m−2, 5% lower than model, for the case including mediator. The discrepancy of OCV prediction is below 3%, making the approach reliable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Microbial fuel cells: from fundamentals to applications. A review10.1016/j.jpowsour.2017.03.109 ↗
2. Electricity generation from mixed volatile fatty acids using microbial fuel cells10.1007/s00253-010-2746-5 ↗
3. On the effect of different configurations in air-cathode MFCs fed by composite food waste for energy harvesting
4. Yeast and carbon nanotube based biocatalyst developed by synergetic effects of covalent bonding and hydrophobic interaction for performance enhancement of membraneless microbial fuel cell10.1016/j.biortech.2016.11.051 ↗
5. Improvement of Yeast−Biofuel cell output by electrode modifications10.1021/ie1000949 ↗
6. Factors that influence the performance of two-chamber microbial fuel cell10.1016/j.ijhydene.2014.04.023 ↗
7. Macroporous graphitic carbon foam decorated with polydopamine as a high-performance anode for microbial fuel cell10.1016/j.jpowsour.2017.07.064 ↗
8. Amine-terminated ionic liquid functionalized carbon nanotubes for enhanced interfacial electron transfer of Shewanella putrefaciens anode in microbial fuel cells10.1016/j.jpowsour.2016.03.033 ↗
9. Microbial fuel cells: methodology and technology †10.1021/es0605016 ↗
10. Microbial fuel cells—challenges and applications10.1021/es0627592 ↗
11. Nanostructured material-based biofuel cells: recent advances and future prospects10.1039/C6CS00044D ↗
12. Carbon felt based-electrodes for energy and environmental applications: a review10.1016/j.carbon.2017.06.078 ↗
13. Surface modification of commercial carbon felt used as anode for Microbial Fuel Cells10.1016/j.energy.2016.01.039 ↗
14. Characterization of a carbon felt electrode: structural and physical properties10.1039/a805823g ↗
15. Fabrication and characterization of graphite-cement composites for microbial fuel cells applications10.1016/j.materresbull.2016.12.037 ↗
16. Logan · 2007
17. Characterization of electron transfer mechanism in mediated microbial fuel cell by entrapped electron mediator in saccharomyces cerevisiae
18. Biocatalyst including porous enzyme cluster composite immobilized by two-step crosslinking and its utilization as enzymatic biofuel cell10.1016/j.jpowsour.2017.06.012 ↗
19. Performance of electro-spun carbon nanofiber electrodes with conductive poly(3,4-ethylenedioxythiophene) coatings in bioelectrochemical systems10.1016/j.jpowsour.2017.03.133 ↗
20. Mediatorless high-power glucose biofuel cells based on compressed carbon nanotube-enzyme electrodes10.1038/ncomms1365 ↗
21. Applications of graphene in microbial fuel cells: the gap between promise and reality10.1016/j.rser.2016.10.044 ↗
22. Improving the performance of microbial fuel cells by reducing the inherent resistivity of carbon fiber brush anodes10.1016/j.jpowsour.2017.02.083 ↗
23. Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells10.1016/j.jpowsour.2018.01.001 ↗
24. Enhancement of power output by using alginate immobilized algae in biophotovoltaic devices10.1038/s41598-017-16530-y ↗
25. Improved performance of membrane free single-chamber air-cathode microbial fuel cells with nitric acid and ethylenediamine surface modified activated carbon fiber felt anodes10.1016/j.biortech.2010.06.046 ↗
26. Enhancement of methyl orange degradation and power generation in a photoelectrocatalytic microbial fuel cell10.1016/j.apenergy.2017.07.032 ↗
27. Nanoporous Mo2C functionalized 3D carbon architecture anode for boosting flavins mediated interfacial bioelectrocatalysis in microbial fuel cells10.1016/j.jpowsour.2017.05.101 ↗
28. Power output of microbial fuel cell emphasizing interaction of anodic binder with bacteria10.1016/j.jpowsour.2018.01.040 ↗
29. Comparative evaluation of performance and electrochemistry of microbial fuel cells with different anode structures and materials10.1016/j.ijhydene.2017.07.180 ↗
30. Effect of type and concentration of substrate on power generation in a dual chambered microbial fuel cell
31. Investigation on performance of microbial fuel cells based on carbon sources and kinetic models10.1002/er.2994 ↗
32. The impact of new cathode materials relative to baseline performance of microbial fuel cells all with the same architecture and solution chemistry10.1039/C7EE00910K ↗
33. Effect of power shape on energy extraction from microbial fuel cell10.1016/j.jpowsour.2017.09.002 ↗
34. Models for microbial fuel cells: a critical review10.1016/j.jpowsour.2017.11.001 ↗
35. Model based evaluation of the effect of pH and electrode geometry on microbial fuel cell performance10.1016/j.bioelechem.2009.04.009 ↗
36. Optimization of extraction process for bioactive compounds from Litsea cubeba fruits10.1007/s11814-017-0251-6 ↗
37. Optimization of growth medium for the production of spores from Bacillus thuringiensis using response surface methodology10.1007/PL00008999 ↗
38. Optimization of biodiesel production process in a continuous microchannel using response surface methodology10.1007/s11814-016-0342-9 ↗
39. Polyethylenimine-coated polysulfone/bacterial biomass composite fiber as a biosorbent for the removal of anionic dyes: optimization of manufacturing conditions using response surface methodology10.1007/s11814-017-0149-3 ↗
40. Ensemble engineering and statistical modeling for parameter calibration towards optimal design of microbial fuel cells10.1016/j.jpowsour.2017.02.051 ↗
41. Power generation using different cation, anion, and ultrafiltration membranes in microbial fuel cells10.1021/es062202m ↗
42. Solid phase microbial fuel cell (SMFC) for harnessing bioelectricity from composite food waste fermentation: influence of electrode assembly and buffering capacity10.1016/j.biortech.2011.04.039 ↗
43. Microbial fuel cell: critical factors regulating bio-catalyzed electrochemical process and recent advancements10.1016/j.rser.2014.07.109 ↗
44. Allometric scaling of microbial fuel cells and stacks: the lifeform case for scale-up10.1016/j.jpowsour.2017.04.033 ↗
45. Bacteria and yeasts as catalysts in microbial fuel cells: electron transfer from micro-organisms to electrodes for green electricity10.1039/b810642h ↗
46. Extracellular electron transfer in yeast-based biofuel cells: a review10.1016/j.bioelechem.2015.04.001 ↗
47. Early-stage performance evaluation of flowing microbial fuel cells using chemically treated carbon felt and yeast biocatalyst10.1016/j.apenergy.2018.03.193 ↗
48. Effects of methylene blue and methyl red mediators on performance of yeast based microbial fuel cells adopting polyethylenimine coated carbon felt as anode10.1016/j.jpowsour.2018.06.005 ↗
49. Statistical optimization of curcumin nanosuspension through liquid anti-solvent precipitation (LASP) process in a microfluidic platform: Box-Behnken design approach10.1007/s11814-017-0201-3 ↗
50. Characterization of electron mediated microbial fuel cell by Saccharomyces Cerevisiae
51. Saccharomyces cerevisiae as anodic biocatalyst for power generation in biofuel cell: influence of redox condition and substrate load10.1016/j.biortech.2010.11.048 ↗
52. Essential data and techniques for conducting microbial fuel cell and other types of bioelectrochemical system experiments10.1002/cssc.201100604 ↗
53. Wastewater treatment in microbial fuel cells - an overview10.1016/j.jclepro.2016.02.022 ↗
54. Recent advances in the use of different substrates in microbial fuel cells toward wastewater treatment and simultaneous energy recovery10.1016/j.apenergy.2016.01.056 ↗
55. Electrochemical property of methylene blue redox dye immobilized on porous silica–zirconia–antimonia mixed oxide10.1016/S0013-4686(01)00870-2 ↗
56. Preliminary electrochemical study of phenothiazines and phenoxazines immobilized on zirconium phosphate10.1016/S0022-0728(97)00168-X ↗
57. Air humidity and water pressure effects on the performance of air-cathode microbial fuel cell cathodes10.1016/j.jpowsour.2013.08.084 ↗
58. A hydrophobic blend binder for anti-water flooding of cathode catalyst layers in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.07.116 ↗
59. Performance of sulfate reducing bacteria-microbial fuel cells: Reproducibility10.1016/j.jtice.2015.04.028 ↗
60. Internal resistance of microfluidic microbial fuel cell: challenges and potential opportunities10.1016/j.biortech.2013.05.061 ↗
61. Hemoproteins in design of biofuel cells10.1002/fuce.200800052 ↗
62. Influence of attached bacteria and biofilm on double-layer capacitance during biofilm monitoring by electrochemical impedance spectroscopy10.1016/j.watres.2011.06.010 ↗
63. Impact of initial biofilm growth on the anode impedance of microbial fuel cells10.1002/bit.21878 ↗