Dual-function ethyl 4,4,4-trifluorobutyrate additive for high-performance Ni-rich cathodes and stable graphite anodes
Source abstract
Abstract
Abstract An ethyl 4,4,4-trifluorobutyrate (ETFB) additive, with ester and partially fluorinated alkyl moieties, is employed to stabilize the interface structure of Ni-rich layered LiNi0.7Co0.15Mn0.15O2 (NCM) cathodes and graphite anodes. The analysis of the surface chemistry of the electrodes shows that ETFB serves as a bifunctional additive for constructing protective layers on both electrodes in a full cell. Cycling tests reveal that the addition of 1% ETFB leads to excellent capacity retention (84.8%) for the NCM/graphite full cell, which also delivers a superior discharge capacity of 167 mAh g−1 and a high Coulombic efficiency of over 99.8% after 300 cycles at 45 °C. The ETFB-derived protective layer effectively reduces intergranular cracking in secondary NCM cathode particles upon repeated charge-discharge cycling and limits the dissolution of transition metal ions from the cathode at high temperatures. In addition, after ETFB reduction, the graphite anode develops a thermally stable interface structure, which suppresses the self-discharge of graphite coupled with the NCM cathode at 60 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
3. High-voltage positive electrode materials for lithium-ion batteries10.1039/C6CS00875E ↗
4. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
5. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
6. 2D boron nitride nanoflakes as a multifunctional additive in gel polymer electrolytes for safe, long cycle life and high rate lithium metal batteries10.1039/C7EE01095H ↗
7. Lithium dendrite suppression with UV-curable polysilsesquioxane separator binders10.1021/acsami.6b02735 ↗
8. Preparation of organic/inorganic hybrid semi-interpenetrating network polymer electrolytes based on poly(ethylene oxide-co-ethylene carbonate) for all-solid-state lithium batteries at elevated temperatures10.1016/j.polymer.2014.04.051 ↗
9. Review—recent advances and remaining challenges for lithium ion battery cathodes I. Nickel-rich, LiNixCoyMnzO210.1149/2.0351701jes ↗
10. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
11. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
12. Intrinsic origins of crack generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 layered oxide cathode material10.1038/srep39669 ↗
13. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
14. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
15. Microstructural study on degradation mechanism of layered LiNi0.6Co0.2Mn0.2O2 cathode materials by analytical transmission electron microscopy10.1016/j.jpowsour.2016.01.023 ↗
16. Investigating the reversibility of structural modifications of LixNiyMnzCo1–y–zO2 cathode materials during initial charge/discharge, at multiple length scales10.1021/acs.chemmater.5b02457 ↗
17. An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer10.1007/s12274-014-0631-8 ↗
18. Nickel-rich layered microspheres cathodes: lithium/nickel disordering and electrochemical performance10.1021/am5030726 ↗
19. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
20. Control of electrochemical properties of nickel-rich layered cathode materials for lithium ion batteries by variation of the manganese to cobalt ratio10.1016/j.jpowsour.2014.11.075 ↗
21. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
22. A bi-functional lithium difluoro(oxalato)borate additive for lithium cobalt oxide/lithium nickel manganese cobalt oxide cathodes and silicon/graphite anodes in lithium-ion batteries at elevated temperatures10.1016/j.electacta.2014.05.136 ↗
23. Dicarboxylate-substituted ethylene carbonate as an SEI-forming additive for lithium-ion batteries10.1149/2.0901509jes ↗
24. Understanding the effects of a multi-functionalized additive on the cathode–electrolyte interfacial stability of Ni-rich materials10.1016/j.jpowsour.2015.10.051 ↗
25. Epicyanohydrin as an interface stabilizer agent for cathodes of Li-ion batteries10.1149/2.0431602jes ↗
26. Stabilizing interface layer of LiNi0.5Co0.2Mn0.3O2 cathode materials under high voltage using p-toluenesulfonyl isocyanate as film forming additive10.1016/j.jpowsour.2017.01.116 ↗
27. Effects of 1-propylphosphonic acid cyclic anhydride as an electrolyte additive on the high voltage cycling performance of graphite/LiNi0.5Co0.2Mn0.3O2 battery10.1016/j.electacta.2015.03.111 ↗
28. Fluorinated carbonate-based electrolyte for high-voltage Li(Ni0.5Mn0.3Co0.2)O2/graphite lithium-ion battery10.1149/2.0591701jes ↗
29. Washing effects on electrochemical performance and storage characteristics of LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium-ion batteries10.1016/j.jpowsour.2012.08.029 ↗
30. Re-construction layer effect of LiNi0.8Co0.15Mn0.05O2 with solvent evaporation process10.1038/srep44557 ↗
31. Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges)10.1016/j.jpowsour.2014.02.018 ↗
32. Formation of poly(ethy1ene ether carbonate) diols: proposed mechanism and kinetic analysis10.1021/ma00046a040 ↗
33. 614. Organic carbonates. Part V. The mechanism of hydrolysis of cyclic carbonates: tracer studies10.1039/jr9600003079 ↗
34. Nucleophilic reactivity at unsaturated centers: I. Methanolysis of substituted methyl benzoates10.1016/S0040-4039(01)99692-3 ↗
35. Structure of active centers and mechanism of the anionic polymerization of lactones10.1002/macp.1984.021850110 ↗
36. Electrochemical reduction of pyridine- and benzene-substituted n-alkyl esters and thioic S-esters in acetonitrile10.1021/jo961492u ↗
37. The structure of the long-lived radical cation of ethyl acetate10.1039/C39920000466 ↗
38. The long-lived radical cations of simple carbon esters isomerize to the lowest-energy structure10.1021/ja00086a036 ↗