journal article·2016-10

Impact modeling of cylindrical lithium-ion battery cells: a heterogeneous approach

Mehdi Gilaki, Ilya Avdeev

Publisher page

Abstract

Abstract In this study, a heterogeneous finite element model was developed in LS-DYNA to investigate lateral impact on 6P cylindrical lithium-ion battery cells manufactured by Johnson Controls Inc. The results were compared to those from a homogenized model previously reported by the authors and also experimental data and showed a good agreement. In order to find the stress-strain curves needed for the finite element simulations, compression tests were conducted on stacks of jellyroll's individual layers, i.e. coated aluminum, coated copper and separator. It was found that the load carrying capacity of the jellyroll comes primarily from the coated aluminum layers. SEM images of the separator layers showed their trilayer structure and how they collapse under excessive compressive loads. Compression experiments were also performed on flattened jellyroll samples after being soaked in electrolyte for 24 h. The measured stress-strain relations showed a very good agreement with the results from a similar set of experiments on dry jellyrolls. This suggested that characterizing dry cells could predict how live cells would react under compression/crash tests without dealing with all the safety provisions needed for those experiments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Fiber-reinforced polymer composites · Radiation Effects in Electronics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Effects of separator breakdown on abuse response of 18650 li-ion cells10.1016/j.jpowsour.2007.06.163 ↗
2. Mechanical behavior of a battery separator in electrolyte solutions10.1016/j.jpowsour.2011.06.026 ↗
3. Rate- and temperature-dependent material behavior of a multilayer polymer battery separator10.1007/s11665-013-0743-4 ↗
4. Mechanical properties of a battery separator under compression and tension10.1149/2.0191411jes ↗
5. A model for the behavior of battery separators in compression at different strain/charge rates10.1149/2.0111411jes ↗
6. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical lithium ion battery cells10.1016/j.jpowsour.2012.04.055 ↗
7. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity10.1016/j.jpowsour.2011.10.094 ↗
8. Hill · 2011
9. Modeling and short circuit detection of 18650 li-ion cells under mechanical abuse conditions10.1016/j.jpowsour.2012.07.057 ↗
10. Avdeev · 2012 · 461
11. Homogenized mechanical properties for the jellyroll of cylindrical lithium-ion cells10.1016/j.jpowsour.2013.04.135 ↗
12. Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact10.1016/j.jpowsour.2014.08.014 ↗
13. Chatiri · 2009
14. A study on the behavior of a cylindrical type li-ion secondary battery under abnormal conditions. ber das verhalten eines zylindrischen li-ionen akkumulators unter abnormalen bedingungen10.1002/mawe.201000612 ↗
15. Damage of cells and battery packs due to ground impact10.1016/j.jpowsour.2014.05.078 ↗
16. Hallquist · 2006 · Vol. 1
17. 2014 · Vol. 1