journal article·2007-10

Development of LSM-based cathodes for solid oxide fuel cells based on YSZ films

Kongfa Chen, Zhe Lü, Xiangjun Chen, Na Ai, Xiqiang Huang, Xiaobo Du, Wenhui Su

Journal of Power Sources· Volume 172· Issue 2
Publisher page

Abstract

In an attempt to achieve desirable cell performance, the effects of La0.7Sr0.3MnO3 (LSM)-based cathodes on the anode-supported solid oxide fuel cells (SOFCs) were investigated in the present study. Three types of cathodes were fabricated on the anode-supported yttria-stabilized zirconia (YSZ) thin films to constitute several single cells, i.e., pure LSM cathode, LSM/YSZ composite by solid mixing, LSNVSM0.2Ce0.8O1.9 (SDC) composite by the ion-impregnation process. Among the three single cells, the highest cell output performance 1.25 W cm(-2) at 800 degrees C, was achieved by the cell using LSM/SDC cathode when the cathode was exposed to the stationary air. Whereas, the most considerable cell performance of 2.32 W cm(-2) was derived from the cell with LSM/YSZ cathode, using 100 ml min(-1) oxygen flow as the oxidant. At reduced temperatures down to 700 degrees C, the LSM/SDC cathode was the most suitable cathode for zirconia-based electrolyte SOFC in the present study. The variation in the cell performances was attributed to the mutual effects between the gas diffusing rate and three-phase boundary length of the cathode. (c) 2007 Elsevier B.V All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Minh · Solid State Ionics · 2004 · 174 · 27110.1016/j.ssi.2004.07.042 ↗
2. Zhang · Solid State Ionics · 2006 · 177 · 28110.1016/j.ssi.2005.11.008 ↗
3. Chen · Solid State Ionics · 2007 · 177 · 345510.1016/j.ssi.2006.10.003 ↗
4. Xin · J. Power Sources · 2006 · 160 · 122110.1016/j.jpowsour.2006.02.073 ↗
5. Tsai · Solid State Ionics · 1997 · 93 · 20710.1016/S0167-2738(96)00524-3 ↗
6. de Souza · Solid State Ionics · 1997 · 98 · 5710.1016/S0167-2738(96)00525-5 ↗
7. Wang · Solid State Ionics · 1998 · 113–115 · 29110.1016/S0167-2738(98)00379-8 ↗
8. Xu · Solid State Ionics · 2005 · 176 · 151310.1016/j.ssi.2005.04.011 ↗
9. Murray · Solid State Ionics · 2001 · 143 · 26510.1016/S0167-2738(01)00871-2 ↗
10. Jiang · Solid State Ionics · 2005 · 176 · 135110.1016/j.ssi.2005.03.011 ↗
11. Wang · J. Electrochem. Soc. · 1998 · 145 · 193210.1149/1.1838578 ↗
12. Kim · Solid State Ionics · 2001 · 147 · 37910.1016/S0167-2738(01)00877-3 ↗
13. K.F. Chen, Z. Lü, X.J. Chen, N. Ai, X.Q. Huang, W.H. Su, Effect of La0.7Sr0.3MnO3-Sm0.2Ce0.8O1.9 cathode on the performance of zirconia film fuel cell, J Funct. Mater., in press.
14. Chen · J. Power Sources · 2007 · 167 · 8410.1016/j.jpowsour.2007.01.088 ↗
15. Jiang · J. Electrochem. Soc. · 1998 · 145 · 37310.1149/1.1838271 ↗
16. Charpentier · Solid State Ionics · 2000 · 135 · 37310.1016/S0167-2738(00)00472-0 ↗
17. Zhang · Ceram. Int. · 2004 · 30 · 104910.1016/j.ceramint.2003.10.026 ↗
18. Eguchi · J. Alloys Compd. · 1997 · 250 · 48610.1016/S0925-8388(96)02629-1 ↗
19. Wang · Solid State Ionics · 2005 · 176 · 255510.1016/j.ssi.2005.07.013 ↗
20. Leng · Int. J. Hydrogen Energy · 2004 · 29 · 102510.1016/j.ijhydene.2004.01.009 ↗
21. Murray · Solid State Ionics · 1998 · 110 · 23510.1016/S0167-2738(98)00142-8 ↗
22. N. Ai, Z. Lü, K.F. Chen, X.Q. Huang, X.B. Du, W.H. Su, Effects of anode surface modification on the performance of low temperature SOFCs, J. Power Sources, submitted for publication.
23. Wang · J. Power Sources · 2006 · 156 · 30610.1016/j.jpowsour.2005.06.035 ↗
24. Yamahara · Solid State Ionics · 2005 · 176 · 27510.1016/j.ssi.2004.08.017 ↗