Improved membrane and electrode assemblies for proton exchange membrane fuel cells
Source abstract
Abstract
Abstract Three electrodes—E1 (0.18 mg Pt cm −2 ), E2 (0.38 mg Pt cm −2 ), E3 (0.4 mg Pt cm −2 without a gas-diffusion layer)—are fabricated and compared with a commercial product (E-TEK). The performance of the electrodes increases with increase in Pt loading in the catalyst layer. The performance of the E2 electrode is superior to that of E1, E-TEK or E3. Elimination of the diffusion layer between the carbon-cloth substrate and the catalyst layer affects the performance of electrode E3 in particular. The power density shows a similar pattern to current density. The difference in performance between E2 and E-TEK electrodes may be due to the difference in the method of fabrication. Increase in exchange current density results in an increase in efficiency. The curves for E1, E2 and E-TEK electrodes appear to stabilize at constant efficiency, which indicates maximum efficiency at a lower exchange current density, compared with the E2 electrode, which does not approach a steady efficiency even at an exchange current density of 1 mA cm −2 . This means that the E2 electrode has greater efficiency than E1, E3 or E-TEK electrodes. Voltage and irreversibility curves for the four electrodes meet at different voltage operational limits; namely, 0.48, 0.55, 0.46 and 0.42 V at 1.2, 0.85, 0.4 and 0.3 mA cm −2 , for E-TEK, E2, E1 and E3 electrodes, respectively. Hence, while these electrodes can be operated conveniently, the E2 electrode with a 0.38 mg Pt cm −2 loading can be operated at optimum conditions of 0.55 V and 0.85 mA cm −2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. J. Larminie, A. Dicks, Fuel Cell Systems Explained, Wiley, Chichester, 2001, p. 17.
2. C. Rachid, Fabrication of Low Platinum Loading Electrode for Proton Exchange Membrane Fuel Cells System (PEMFCs), Masters Thesis, Universiti Kebangaan Malaysia, Malaysia, 2001, p. 43.
3. Mukerjee · Electrochim. Acta · 1993 · 38 · 166110.1016/0013-4686(93)85056-5 ↗
4. Sasi · Electrochim. Acta · 1994 · 40 · 285
5. Zawodzinski · J. Electrochem. Soc. · 1993 · 140 · 104110.1149/1.2056194 ↗
6. Ticianelli · J. Electrochem. Soc. · 1988 · 135 · 220910.1149/1.2096240 ↗
7. Felix · J. Electrochem. Soc. · 1997 · 144 · 276710.1149/1.1837893 ↗
8. Wilson · Electrochim. Acta · 1995 · 40 · 35510.1016/0013-4686(94)00272-3 ↗
9. Passalacqua · Electrochim. Acta · 1998 · 43 · 366510.1016/S0013-4686(98)00124-8 ↗