Highly stable P′3-K0.8CrO2 cathode with limited dimensional changes for potassium ion batteries
Source abstract
Abstract
Abstract O3–KCrO2 is the only known stoichiometric layered transition metal oxide with a layered structure, which enables efficient coupling with a graphite anode for K+-shuttling batteries. O3–KCrO2, however, shows low Coulombic efficiency during 1st charge/discharge cycle and continuous capacity fading during subsequent cycles. Here, we present a slightly K+-deficient compound P′3-K0.8CrO2, synthesized from a commercially available K2CrO4, as a stable cathode in potassium ion batteries. During the 1st charge, K0·8CrO2 mostly retains its P′3-phase with a short P3 region and finally returns to a P′3-phase (K0·48CrO2). Subsequent discharge shows reversible phase transitions, but ultimately yielded a new O′3-K0.9CrO2 phase. Absence of an O3-phase and persistence of a P′3-phase during charge/discharge, result in negligible volume changes (1.08%) and facile K+-diffusion through the spacious-prismatic sites (D = 10−11 - 10−10 cm2 s−1). This eventually contributes to a significant improvement in cyclic stability (99% retention after 300 cycles at 1 C) and rate capability (52 mAh·g−1 at 2 C), respectively. We believe that the use of slightly K+-deficient chromium oxides synthesized via a simple protocol should enhance the commercial viability of KxCrO2 in potassium ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
3. Cathode materials for potassium-ion batteries: current status and perspective10.1007/s41918-018-0023-y ↗
4. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
5. Potassium secondary batteries10.1021/acsami.6b07989 ↗
6. Potassium-ion battery anode materials operating through the alloying–dealloying reaction mechanism10.1002/adfm.201703857 ↗
7. Boosting the potassium storage performance of alloy-based anode materials via electrolyte salt chemistry10.1002/aenm.201703288 ↗
8. Sodium intercalation chemistry in graphite10.1039/C5EE02051D ↗
9. Expanded graphite as superior anode for sodium-ion batteries10.1038/ncomms5033 ↗
10. Sodium-ion battery materials and electrochemical properties reviewed10.1002/aenm.201800079 ↗
11. The marriage of an ether-based electrolyte with hard carbon anodes creates superor sodium-ion batteries with high mass loading10.1021/acsami.8b15274 ↗
12. Bulk bismuth as a high-capacity and ultralong cycle-life anode for sodium-ion batteries by coupling with glyme-based electrolytes10.1002/adma.201702212 ↗
13. Multicore–shell Bi@N-doped carbon nanospheres for high power density and long cycle life sodium- and potassium-ion anodes10.1002/adfm.201809195 ↗
14. Non-aqueous potassium-ion batteries: a review10.1016/j.coelec.2018.03.031 ↗
15. Theoretical analysis of interactions between potassium ions and organic electrolyte solvents: a comparison with lithium, sodium, and magnesium ions10.1149/2.0211702jes ↗
16. Stable all-solid-state potassium battery operating at room temperature with a composite polymer electrolyte and a sustainable organic cathode10.1016/j.jpowsour.2018.07.124 ↗
17. Reversible K+-insertion/deinsertion and concomitant Na+-Redistribution in P′3-Na0.52CrO2 for high-performance potassium-ion battery cathodes10.1021/acs.chemmater.7b05329 ↗
18. Electrochemical intercalation of potassium into graphite10.1002/adfm.201602248 ↗
19. Commercial expanded graphite as a low –cost, long-cycling life anode for potassium–ion batteries with conventional carbonate electrolyte10.1016/j.jpowsour.2017.12.033 ↗
20. An initial review of the status of electrode materials for potassium-ion batteries10.1002/aenm.201602911 ↗
21. Non-aqueous K-ion battery based on layered K0.3MnO2 and hard carbon/carbon black10.1149/2.0921607jes ↗
22. Investigation of potassium storage in layered P3-type K0.5MnO2 cathode10.1002/adma.201702480 ↗
23. P2- and P3-KxCoO2 as an electrochemical potassium intercalation host10.1039/C7CC00806F ↗
24. K-ion batteries based on a P2-type K0.6CoO2 cathode10.1002/aenm.201700098 ↗
25. Earth abundant Fe/Mn-based layered oxide interconnected nanowires for advanced K-ion full batteries10.1021/acs.nanolett.6b04611 ↗
26. Zur kenntnis von KMnO210.1002/zaac.19824900112 ↗
27. Zur Kenntnis von KCoO2, und RbCoO210.1002/zaac.19754170105 ↗
28. Crystal and magnetic structure of KFeO210.1016/0022-3697(77)90037-3 ↗
29. Stoichiometric layered potassium transition metal oxide for rechargeable potassium batteries10.1021/acs.chemmater.8b03228 ↗
30. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
31. Development of P3-K0.69CrO2 as an ultra-high performance cathode material for K-ion batteries10.1039/C8EE01365A ↗
32. In situ high-temperature X-ray diffraction studies of reduction of K2CrO4 and the formation of KxCrOy compounds10.1017/S0885715617000690 ↗
33. Lithium diffusion in layered LixCoO210.1149/1.1391130 ↗
34. Li diffusion in LiCoO2 thin films prepared by pulsed laser deposition10.1016/j.jpowsour.2005.12.012 ↗
35. Lithium diffusion in LixCoO2 (0.45<x<0.7) intercalation cathodes10.1149/1.1368717 ↗
36. K0.67Ni0.17Co0.17Mn0.66O2: a cathode material for potassium-ion battery10.1016/j.elecom.2017.08.008 ↗
37. K-birnessite electrode obtained by ion exchange for potassium-ion batteries: insight into the concerted ionic diffusion and K storage mechanism
38. KCrS2 cathode with considerable cyclability and high rate performance: the first K+ stoichiometric layered compound for potassium-ion batteries10.1002/smll.201803495 ↗