journal article·2018-04

An easy-to-parameterise physics-informed battery model and its application towards lithium-ion battery cell design, diagnosis, and degradation

Yu Merla, Billy Wu, Vladimir Yufit, Ricardo F. Martinez-Botas, Gregory J. Offer

Publisher page

Abstract

Abstract Accurate diagnosis of lithium ion battery state-of-health (SOH) is of significant value for many applications, to improve performance, extend life and increase safety. However, in-situ or in-operando diagnosis of SOH often requires robust models. There are many models available however these often require expensive-to-measure ex-situ parameters and/or contain unmeasurable parameters that were fitted/assumed. In this work, we have developed a new empirically parameterised physics-informed equivalent circuit model. Its modular construction and low-cost parametrisation requirements allow end users to parameterise cells quickly and easily. The model is accurate to 19.6 mV for dynamic loads without any global fitting/optimisation, only that of the individual elements. The consequences of various degradation mechanisms are simulated, and the impact of a degraded cell on pack performance is explored, validated by comparison with experiment. Results show that an aged cell in a parallel pack does not have a noticeable effect on the available capacity of other cells in the pack. The model shows that cells perform better when electrodes are more porous towards the separator and have a uniform particle size distribution, validated by comparison with published data. The model is provided with this publication for readers to use.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
2. How do reactions at the anode/electrolyte interface determine the cathode performance in lithium-ion batteries?10.1149/2.022304jes ↗
3. Novel application of differential thermal voltammetry as an in-depth state-of-health diagnosis method for lithium-ion batteries10.1016/j.jpowsour.2015.12.122 ↗
4. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications10.1016/j.jpowsour.2013.05.040 ↗
5. Cell degradation in commercial LiFePO4 cells with high-power and high-energy designs10.1016/j.jpowsour.2014.02.052 ↗
6. State-of-health monitoring of lithium-ion battery modules and packs via incremental capacity peak tracking10.1016/j.apenergy.2016.07.126 ↗
7. Incremental capacity analysis and close-to-equilibrium OCV measurements to quantify capacity fade in commercial rechargeable lithium batteries10.1149/1.2221767 ↗
8. Differential voltage analyses of high-power, lithium-ion cells 1. Technique and application10.1016/j.jpowsour.2004.07.021 ↗
9. Degradation mechanisms of the graphite Electrode in C 6/LiFePO 4 batteries unraveled by a non-destructive approach10.1149/2.0821614jes ↗
10. State of health estimation algorithm of LiFePO4 battery packs based on differential voltage curves for battery management system application10.1016/j.energy.2016.02.163 ↗
11. Online state of health estimation on NMC cells based on predictive analytics10.1016/j.jpowsour.2016.04.109 ↗
12. Electrochemical characterization and post-mortem analysis of aged LiMn 2O4-NMC/graphite lithium ion batteries part II: calendar aging10.1016/j.jpowsour.2014.02.019 ↗
13. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II : Modelling10.1016/j.jpowsour.2010.07.071 ↗
14. Extending battery life : a low-cost practical diagnostic technique for lithium-ion batteries10.1016/j.jpowsour.2016.09.008 ↗
15. Differential thermal voltammetry for tracking of degradation in lithium-ion batteries10.1016/j.jpowsour.2014.09.127 ↗
16. A mathematical model for the lithium-ion negative electrode solid electrolyte interphase10.1149/1.1804812 ↗
17. A parametric open circuit voltage model for lithium ion batteries10.1149/2.0331512jes ↗
18. Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs10.1016/j.jpowsour.2013.05.164 ↗
19. Multi-scale thermo-electrochemical modeling of performance and aging of a LiFePO 4/graphite lithium-ion cell10.1149/2.0761702jes ↗
20. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction10.1149/2.044302jes ↗
21. Comparison study on the battery models used for the energy management of batteries in electric vehicles10.1016/j.enconman.2012.04.014 ↗
22. A comparative study of equivalent circuit models for Li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
23. State-of-Charge estimation of the lithium-ion battery using an adaptive extended kalman filter based on an improved Thevenin model10.1109/TVT.2011.2132812 ↗
24. Equivalent circuit model parameters of a high-power Li-ion battery: thermal and state of charge effects10.1016/j.jpowsour.2010.12.107 ↗
25. Faulkner · 2001
26. Relaxation phenomena in lithium-ion-insertion cells10.1149/1.2054868 ↗
27. The use of mathematical modeling in the design of lithium/polymer battery systems10.1016/0013-4686(95)00162-8 ↗
28. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
29. Double-layer capacitance in a dual lithium ion insertion cell10.1149/1.1392643 ↗
30. Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries10.1016/S0378-7753(99)00527-3 ↗
31. Low-temperature charging of lithium-ion cells part I: electrochemical modeling and experimental investigation of degradation behavior10.1016/j.jpowsour.2013.12.022 ↗
32. Low-temperature charging of lithium-ion cells Part II: model reduction and application10.1016/j.jpowsour.2013.12.101 ↗
33. Electrochemical state and internal variables estimation using a reduced-order physics-based model of a lithium-ion cell and an extended Kalman filter10.1016/j.jpowsour.2014.11.135 ↗
34. Extended operating range for reduced-order model of lithium-ion cells10.1016/j.jpowsour.2013.12.134 ↗
35. Modeling mechanical degradation in lithium ion batteries during cycling: solid electrolyte interphase fracture10.1016/j.jpowsour.2015.09.033 ↗
36. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
37. Modeling the SEI-formation on graphite electrodes in LiFePO4 batteries10.1149/2.0161506jes ↗
38. Modeling the degradation mechanisms of C6/LiFePO4batteries10.1016/j.jpowsour.2017.11.049 ↗
39. Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling10.1016/j.jpowsour.2013.06.130 ↗
40. A comprehensive capacity fade model and analysis for Li-Ion batteries10.1149/2.040310jes ↗
41. On the stability of LiFePO[sub 4] olivine cathodes under various conditions (electrolyte solutions, temperatures)10.1149/1.2403974 ↗
42. Modeling a porous intercalation electrode with two characteristic particle sizes10.1149/1.1838166 ↗
43. Mathematical modeling of the capacity fade of Li-ion cells10.1016/S0378-7753(03)00531-7 ↗
44. Electrochemical model based observer design for a lithium-ion battery10.1109/TCST.2011.2178604 ↗
45. A three-dimensional multi-physics model for a Li-ion battery10.1016/j.jpowsour.2013.03.170 ↗
46. Modeling of particle-particle interactions in porous cathodes for lithium-ion batteries10.1149/1.2783772 ↗
47. Ecker · 2015 · vol. 162 · 1836
48. Northrop · 2011 · vol. 158
49. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
50. Smith · 2006
51. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
52. Li-ion cell operation at low temperatures10.1149/2.047304jes ↗
53. Simplified electrochemical and thermal model of LiFePO4-graphite Li-Ion batteries for fast charge applications10.1149/2.064209jes ↗
54. Optimization of porosity and thickness of a battery electrode by means of a reaction-zone model10.1149/1.2043956 ↗
55. A physically meaningful equivalent circuit network model of a lithium-ion battery accounting for local electrochemical and thermal behaviour, variable double layer capacitance and degradation10.1016/j.jpowsour.2016.05.051 ↗
56. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
57. Carbon-coated silicon as anode material for lithium ion batteries: advantages and limitations10.1016/S0013-4686(03)00030-6 ↗
58. In-operando x-ray tomography study of lithiation induced delamination of Si based anodes for lithium-ion batteries10.1149/2.0081407eel ↗
59. Synthesis and characterization of high-density LiFePO4/C composites as cathode materials for lithium-ion batteries10.1016/j.electacta.2009.03.063 ↗
60. Study of LiFePO4 cathode materials coated with high surface area carbon10.1016/j.jpowsour.2008.10.015 ↗
61. Electrochemical and thermal studies of carbon-coated LiFePO4 cathode10.1149/1.3106121 ↗
62. Koenig · 2011 · 1954
63. Explicit conversion between different equivalent circuit models for electrochemical impedance analysis of lithium-ion cells10.1149/2.0841802jes ↗
64. Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application10.1016/j.apenergy.2012.09.030 ↗
65. Module design and fault diagnosis in electric vehicle batteries10.1016/j.jpowsour.2012.01.087 ↗
66. State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge10.1016/j.jpowsour.2008.08.103 ↗
67. Wu · 2014 · 99
68. Control oriented 1D electrochemical model of lithium ion battery10.1016/j.enconman.2007.03.015 ↗
69. Genetic parameter identification of the Doyle-Fuller-Newman model from experimental cycling of a LiFePO4 battery
70. Marcicki · 2012
71. A Gouy-Chapman-Stern model of the double layer at a (metal)/(ionic liquid) interface10.1016/j.jelechem.2007.10.017 ↗
72. Molecular dynamics simulations of lithium alkyl carbonates10.1021/jp0639142 ↗
73. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
74. Remaining useful life prediction of lithium batteries in calendar ageing for automotive applications10.1016/j.microrel.2012.06.085 ↗
75. Temperature dependence of capacity and impedance data from fresh and aged high-power lithium-ion cells10.1149/1.2210668 ↗
76. Current, continuity equation, resistance, Ohm's law
77. Evaluation of lithium-ion battery equivalent circuit models for state of charge estimation by an experimental approach10.3390/en4040582 ↗
78. Chung · 2014 · vol. 161 · 422
79. Benefit analysis of employing graded electrodes in lithium-ion batteries10.1149/2.1051713jes ↗