Model-based diagnosis through Structural Analysis and Causal Computation for automotive Polymer Electrolyte Membrane Fuel Cell systems
Source abstract
Abstract
The present paper proposes an advanced approach for Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems fault detection and isolation through a model-based diagnostic algorithm. The considered algorithm is developed upon a lumped parameter model simulating a whole PEMFC system oriented towards automotive applications. This model is inspired by other models available in the literature, with further attention to stack thermal dynamics and water management. The developed model is analysed by means of Structural Analysis, to identify the correlations among involved physical variables, defined equations and a set of faults which may occur in the system (related to both auxiliary components malfunctions and stack degradation phenomena). Residual generators are designed by means of Causal Computation analysis and the maximum theoretical fault isolability, achievable with a minimal number of installed sensors, is investigated. The achieved results proved the capability of the algorithm to theoretically detect and isolate almost all faults with the only use of stack voltage and temperature sensors, with significant advantages from an industrial point of view. The effective fault isolability is proved through fault simulations at a specific fault magnitude with an advanced residual evaluation technique, to consider quantitative residual deviations from normal conditions and achieve univocal fault isolation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Fault Detection and Control Systems · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Barbir · 2013
2. Larminie · 2003
3. U. S. Department of Energy · 2016
4. Fuel Cells and Hydrogen Joint Undertaking., Multi-Annual Work Plan 2014-2020. http://www.fch.europa.eu/page/multi-annual-work-plan (accessed april 2017).
5. Model-based development of a fault signature matrix to improve solid oxide fuel cell systems on-site diagnosis10.1016/j.jpowsour.2015.01.037 ↗
6. Marra · 2016
7. Fault tolerance control for proton exchange membrane fuel cell systems10.1016/j.jpowsour.2016.05.066 ↗
8. Model-based fault diagnosis in pem fuel cell systems10.1016/j.jpowsour.2008.12.014 ↗
9. On-line experimental validation of a model-based diagnostic algorithm dedicated to a solid oxide fuel cell system10.1016/j.jpowsour.2015.12.046 ↗
10. Model-based prognostic algorithm for online rul estimation of pemfcs
11. Isermann · 2006
12. Robust model-based fault diagnosis for pem fuel cell air-feed system10.1109/TIE.2016.2535118 ↗
13. Robust fault diagnosis of proton exchange membrane fuel cells using a takagi-sugeno interval observer approach10.1016/j.ijhydene.2015.12.071 ↗
14. On-line model-based fault detection and isolation for pem fuel cell stack systems10.1016/j.apm.2013.10.065 ↗
15. High fuel utilization in solid oxide fuel cells: experimental characterization and data analysis with continuous wavelet transform10.1016/j.jpowsour.2016.03.069 ↗
16. A signal-based method for fast pemfc diagnosis10.1016/j.apenergy.2015.12.084 ↗
17. Signal-based diagnostics by wavelet transform for proton exchange membrane fuel cell10.1016/j.egypro.2015.07.708 ↗
18. Polymer electrolyte membrane fuel cell fault diagnosis based on empirical mode decomposition10.1016/j.jpowsour.2015.09.041 ↗
19. Pem fuel cell fault diagnosis via a hybrid methodology based on fuzzy and pattern recognition techniques10.1016/j.engappai.2014.07.008 ↗
20. Blanke · 2006
21. Isermann · 2011
22. Automotive engine fdi by application of an automated model-based and data-driven design methodology10.1016/j.conengprac.2012.12.006 ↗
23. An efficient algorithm for finding minimal overconstrained subsystems for model-based diagnosis10.1109/TSMCA.2007.909555 ↗
24. Selecting and utilizing sequential residual generators in fdi applied to hybrid vehicles10.1109/TSMC.2013.2248147 ↗
25. Design and evaluation of model-based health monitoring scheme for automated manual transmission10.1115/1.4033907 ↗
26. D. Vey, J. Lunze, Structural reconfigurability analysis of multirotor uavs after actuator failures, 2015 IEEE 54th Annual Conference on Decision and Control (CDC), December 15-18, 2015, Osaka, Japan.10.1109/CDC.2015.7403017 ↗
27. Diagnosability analysis considering causal interpretation for differential constraints10.1109/TSMCA.2012.2189877 ↗
28. Fault diagnosis based on causal computations10.1109/TSMCA.2011.2164063 ↗
29. Pukrushpan · 2005
30. Modeling and analysis of transient behavior of polymer electrolyte membrane fuel cell hybrid vehicles10.1115/1.2743071 ↗
31. A multilevel approach to the energy management of an automotive polymer electrolyte membrane fuel cell system10.1115/1.3115622 ↗
32. A structural algorithm for finding testable sub-models and multiple fault isolability analysis
33. Experimental validation of a lumped model of single droplet deformation, oscillation and detachment on the gdl surface of a pem fuel cell10.1016/j.ijhydene.2013.04.143 ↗
34. A lumped model of single droplet deformation, oscillation and detachment on the gdl surface of a pem fuel cell
35. Coupled modeling of water transport and air–droplet interaction in the electrode of a proton exchange membrane fuel cell10.1016/j.jpowsour.2010.01.020 ↗
36. A generalized fault isolability matrix for improved fault diagnosability analysis
37. D. Capriglione, C. Liguori, C. Pianese, A. Pietrosanto, On-line sensor fault detection, isolation, and accomodation in automotive engines, IEEE Instrumentation and Measurement Technology Conference, Anchorage, AK, USA 21–23 May 2002.
38. Residual generators for fault diagnosis using computation sequences with mixed causality applied to automotive systems10.1109/TSMCA.2010.2049993 ↗
39. Brenan · 1996 · vol. 14
40. Coverings of bipartite graphs10.4153/CJM-1958-052-0 ↗
41. Performance and degradation of proton exchange membrane fuel cells: state of the art in modeling from atomistic to system scale10.1016/j.jpowsour.2015.11.041 ↗
42. Murota · 2009 · vol. 20
43. Hairer · 1996
44. Continuous inspection schemes10.1093/biomet/41.1-2.100 ↗
45. A generalized phenomenological model and database for the transport of water and current in polymer electrolyte membranes10.1149/1.1940747 ↗
46. Performance improvement by temperature control of an open-cathode pem fuel cell system10.1002/fuce.201300211 ↗
47. Modeling polymer electrolyte fuel cells: an innovative approach10.1016/S0378-7753(01)00758-3 ↗
48. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗