journal article·2002-04

Impact of the European Union vehicle waste directive on end-of-life options for polymer electrolyte fuel cells

C. Handley, N.P. Brandon, R. van der Vorst

Journal of Power Sources· Volume 106· Issue 1-2
Publisher page

Abstract

Polymer electrolyte membrane fuel cells (PEMFCs) may well be powering millions of cars by 2020. At its end-of-life, each car will have a redundant PEMFC stack. The EU vehicle waste directive sets tough recycling and re-use requirements for the cars of the future. The criteria for assessing the end-of-life options are based on technical, economic and environmental feasibility. The optimum strategy will require stack dismantling and separation of the major components. Steel and aluminium parts can enter the general recycling stream, but the membrane electrode assembly and bipolar plates will require a specialised recycling process. One option is to shred the MEA, dissolve and recover the membrane, burn off the carbon, and recycle the platinum and ruthenium catalysts using solvent extraction. The heaviest part of the PEMFC stack is the bipolar plates. If carbon fibre based, the bipolar plates could enter a fluidised bed recovery process where the constituent materials are recovered for re-use. The EU vehicle waste directive sets high recycling targets based on weight, and thus it is strongly advisable for the relatively heavy bipolar plates to be recycled, even though energy recovery by incineration may be a cheaper and possible more environmentally benign option. The EU vehicle directive will put pressure on the end-of-life options for the PEMFC stack to be weighted towards recycling and re-use; it will have a significant impact on the design and end-of-life options for the PEMFC. The overall effect of this pressure on the end-of-life treatment of the PEMFC and the consequential contribution to environmental life cycle impacts is discussed. It is concluded that a range of external pressures influence the selection of a suitable end-of-life management strategy, and while opportunities for re-use of components are limited, all components of the PEMFC stack could in principle be recycled.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. D.G. Lovering (Ed.), Proceedings of the 6th Grove Fuel Cell Symposium, J. Power Sources 86 (1/2) (2000).10.1016/S0378-7753(99)00500-5 ↗
2. F.N. Buchi, G.G. Scherer, A Wokaun (Eds.), Proceedings of the 1st European PEFC Forum, Lucerne, Switzerland, 2–6 July 2001.
3. Markets wake up to fuel cell revolution
4. SETAC, 1993, 1994 and 1997.
5. van der Vorst · JEAPM · 1999 · 1 · 1
6. Bauen, et al., Fuel cells: clean power, clean transport, clean future, in: D Hart, A Bauen (Eds.), Financial Times Energy Report, 1998, ISBN 1 84083050 6.
7. V. Karakoussis, M. Leach, R. van der Vorst, D. Hart, J. Lane, P. Pearson, J Kilner, Environmental Emissions of SOFC and PEMFC System Manufacture and Disposal, ETSU Report for the DTI, F/01/00164/REP, (2000).
8. N. Hart, N.P. Brandon, M. Day, J. Shemilt, in: Proceedings of the Fuel Cell 2000, Lucerne, Switzerland, 10–14 July 2000, pp. 389–397.
9. Karakoussis · J. Power Sources · 2001 · 101 · 1010.1016/S0378-7753(01)00482-7 ↗
10. Hart · Mater. Manufact. Processes · 2000 · 15 · 4710.1080/10426910008912972 ↗
11. F.D. Lomax Jr., B.D. James, G.N. Baum, C.E. Thomas, Detailed manufacturing cost estimates for polymer electrolyte membrane (PEM) fuel cells for light duty vehicles, August 1998, Prime Contract DE-AC02-94CE50389 to the US Department of Energy Office of Transportation Technologies.
12. F.R. Kalhammer, P.R. Prokopius, V.P. Roan, G.E. Voecks, Status and prospects of fuel cells as automobile engines, Fuel Cell Technical Advisory Panel (FCTAP), State of California Air Resources Board, July 1998.
13. J. Matthey, Fuel cell development research group, Interviewed 9 May 2000, personal communication.
14. W.G. Grot, Production of a liquid composition containing a perfluorinated ion exchange polymer, and the use of this polymer, EP 00066369A1, 8 December 1982, Du Pont de Nemours and Co.
15. Tsatsas · J. Polym. Sci. Part B: Polym. Phys. · 1993 · 31 · 122310.1002/polb.1993.090310917 ↗
16. J.M. McKinley, US Geological Survey, Minerals Information Team, 2000, personal communication.
17. M. Pehnt, Proceedings of the Fuel Cell, Lucerne, Switzerland, 10–14 July 2000, pp. 367–378.
18. J.E. Barnes, J.D. Edwards, Chemistry and Industry, 6 March 1982, pp. 151–155.
19. R.A. Mercuri, J.J. Gough, Flexible graphite for use in the form of a fuel cell flow field plate, US Patent 6,037,074, UCAR Carbon Technology Corporation, 14 March 2000.
20. Makkus · J. Power Sources · 2000 · 86 · 27410.1016/S0378-7753(99)00460-7 ↗
21. 300 L0053 Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles, Commission Statements, OJ L 269, 21 October 2000, p. 34.
22. J. Scheirs, Polymer rRecycling, Science Technology and Applications, Wiley, New York, 1998, ISBN 0-471-97054 9.
23. Pickering · Composites Sci. Technol. · 2000 · 60 · 50910.1016/S0266-3538(99)00154-2 ↗
24. Boustead Model 4.0 and 4.1, Boustead Consulting Ltd., 1999.
25. M.E. Henstock, The recycling of non-ferrous metals, International Council on Metals and the Environment, ISBN 1-895720-11-7 (1996).
26. FuMA-Tech GmbH, 2000, personal communication.
27. SMMT Press release, 24 May 2000, New Euro scrap car rules threaten UK manufacturing.