journal article·2008-08

Diagnosis methods dedicated to the localisation of failed cells within PEMFC stacks

Guangyu Tian, Sébastien Wasterlain, Issame Endichi, Denis Candusso, Fabien Harel, Xavier François, Marie-Cécile Péra, Daniel Hissel, Jean-Marie Kauffmann

Journal of Power Sources· Volume 182· Issue 2
Publisher page

Abstract

Too low humidification levels and too high stack temperatures, insufficient reactant gas flows causing starvation phenomena, bad controls of pressure gaps between anode and cathode, further mechanical stress in the electrolyte can lead to severe and irreversible damages in PEM fuel cells, i.e., sealing and gasket deterioration, and/or break in the membranes. Overboard leak checks, sometimes called pressure tests, performed with nitrogen and air are usually employed to highlight gas leakages inside the stack between anode and cathode stack compartments. This procedure allows perfectly well the detection of crossover leaks occurring within the stack assembly. However, it is not appropriate to locate which cell or cells have failed, to inform actually where the fault has occurred. The actual need of diagnosis procedures meeting these requirements is important. Indeed, once the failed cells are identified, they may be removed and replaced by safe ones. The article presents some data and descriptions of two failed fuel cell stacks with different power levels, namely 100 W and 5 kW. Some leak checks are first performed and then some experimental investigations are carried out with the goal to locate the defective cells. Some electrical signals which reflect the faults are generated. The open current voltages of the cells are monitored in different operating conditions linked with the gas supply (flow rates, pressures). The procedures allow the detection of the failed cells, which show abnormal performance and voltage pattern when compared to the other cells in the stack. The tests are also conducted in conditions that preserve as much as possible the integrity of the other safe cells. The experimental analysis is supported by the proposition of modelling actions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Knights · J. Power Sources · 2004 · 127 · 12710.1016/j.jpowsour.2003.09.033 ↗
2. Cheng · J. Power Sources · 2007 · 165 · 73910.1016/j.jpowsour.2006.12.012 ↗
3. Debe · J. Power Sources · 2006 · 161 · 100210.1016/j.jpowsour.2006.05.033 ↗
4. Borup · J. Power Sources · 2006 · 163 · 7610.1016/j.jpowsour.2006.03.009 ↗
5. Taniguchi · J. Power Sources · 2004 · 130 · 4210.1016/j.jpowsour.2003.12.035 ↗
6. Liu · J. Power Sources · 2006 · 157 · 16610.1016/j.jpowsour.2005.08.006 ↗
7. Tang · J. Power Sources · 2007 · 170 · 8510.1016/j.jpowsour.2007.03.061 ↗
8. Husar · J. Power Sources · 2007 · 169 · 8510.1016/j.jpowsour.2007.01.078 ↗
9. Tan · Mater. Sci. Eng.: A · 2007 · 445–446 · 66910.1016/j.msea.2006.09.098 ↗
10. Inaba · Electrochim. Acta · 2006 · 51 · 574610.1016/j.electacta.2006.03.008 ↗
11. Collier · Int. J. Hydrogen Energy · 2006 · 31 · 183810.1016/j.ijhydene.2006.05.006 ↗
12. Cleghorn · J. Power Sources · 2006 · 158 · 44610.1016/j.jpowsour.2005.09.062 ↗
13. LaConti · 2003 · vol. 3 · 647
14. Baldwin · J. Power Sources · 1990 · 29 · 39910.1016/0378-7753(90)85013-3 ↗
15. Aoki · Electrochem. Commun. · 2005 · 7 · 143410.1016/j.elecom.2005.10.008 ↗
16. Hissel · J. Power Sources · 2004 · 128 · 23910.1016/j.jpowsour.2003.10.001 ↗
17. S. Chelhaoui, C. Joly, M. Junker, L. Perrette, C. Tombini, State of the art and trends relating to fuel cell systems safety-regulation and standard—SEREPAC, report of the INERIS, December 2002.
18. Fuel Cell TEsting and STandardisation thematic NETwork, http://www.jrc.nl/fctestnet/.
19. A. Ingimundarson, A.G. Stefanopoulou, D. McKay, in: 44th IEEE Conference on Decision and Control 2005 and 2005 European Control Conference. CDC-ECC ’05.
20. D. Hissel, M.C. Péra, D. Candusso, F. Harel, S. Bégot, Characterisation of Polymer Electrolyte Fuel Cell for embedded generators. Test bench design and methodology, Chapter of Advances in fuel cells, Research Signpost, Editor Xiang-Whu Zhang, North Carolina State University, 2005, ISBN: 81-308-0026-8.
21. F. Harel, X. François, S. Jemeï, S. Moratin, Conception et réalisation d’un banc d’essai pour piles à combustibles à membrane de faibles puissances, INRETS Report, LTE no 0310, May 2003, Belfort, France.
22. Zhang · J. Power Sources · 2006 · 163 · 53210.1016/j.jpowsour.2006.09.026 ↗
23. Larminie · 2000
24. Amphlett · J. Electrochem. Soc. · 1995 · 142 · 110.1149/1.2043866 ↗
25. Mann · J. Power Sources · 2006 · 161 · 76810.1016/j.jpowsour.2006.05.054 ↗
26. Atilla Bıyıkoğlu · Int. J. Hydrogen Energy · 2005 · 30 · 118110.1016/j.ijhydene.2005.05.010 ↗
27. MATLAB™ Software, The MathWorks, Inc., http://www.mathworks.com.
28. F. Harel, D. Hissel, M-C. Péra, A. De Bernardinis, R. Lallemand, G. Coquery, S. Raël, B. Davat, First experimental results on a 5kW PEMFC testing bench linked to constraints of the transportation systems, EPEFC’03 2nd European Polymer Electrolyte Fuel Cell Forum, July 2003, Lucerne (Switzerland), pp. 507–516, ISBN 3-905592 13-4.
29. Candusso · Int. J. Hydrogen Energy · 2006 · 31 · 101910.1016/j.ijhydene.2005.11.010 ↗
30. Seddiq · J. Power Sources · 2006 · 161 · 37110.1016/j.jpowsour.2006.04.074 ↗
31. D. Candusso, A. De Bernardinis, M-C. Péra, F. Harel, X. François, D. Hissel, G. Coquery, J-M. Kauffmann, Energy Conv. Manag., in press, available online on 28 Nov 2007, http://www.sciencedirect.com.
32. Coddet · 2007