Characteristics of the strain glass transition in as-quenched and 250 °C early-aged Ti48.7Ni51.3 shape memory alloy
Source abstract
Abstract
Abstract Characteristics of the strain glass transition exhibited in as-quenched and 250 °C 1–5 h aged Ti 48.7 Ni 51.3 SMA were studied by various tests/measurements. The results of frequency-dependent storage modulus vs. temperature measurement, the temperature-dependent resistivity, thermal conductivity, and specific heat tests demonstrated the signature and characteristics of the strain glass transition exhibited in as-quenched and 250 °C early-aged Ti 48.7 Ni 51.3 SMA. The plate-/disk-like morphology and spatially heterogeneous distribution of the real Ni-rich nanodomains in as-quenched and 250 °C 1–5 h aged specimens were quantitatively characterized using small-angle X-ray scattering (SAXS) technique. The formative origin of the real nanodomains and the relationship between the real nanodomains and the strain nanodomains are proposed accordingly. Experimental results indicated R-like phase and Ti 3 Ni 4 -like precipitates co-existing in the strain glass of 250 °C early-aged specimens, and they also demonstrated the growth behavior of the real nanodomains exhibited in specimens during thermal aging. It was also found that increasing the aging time can elevate the T g from ∼−60 °C to ∼−20 °C, which indicates the tunable characteristic of T g for as-quenched Ti 48.7 Ni 51.3 SMA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Pseudoelasticity and shape memory effects in alloys10.1179/imr.1986.31.1.93 ↗
2. Otsuka · 1998 · 1
3. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
4. Evidence for strain glass in the ferroelastic-martensitic system Ti50−x Ni50+x10.1103/PhysRevLett.95.205702 ↗
5. Ferroelastic nanostructures and nanoscale transitions: ferroics with point defects10.1557/mrs2009.234 ↗
6. Effects of disorder in ferroelastics: a spin model for strain glass10.1103/PhysRevB.81.094107 ↗
7. Strain glass in ferroelastic systems: premartensitic tweed versus strain glass10.1080/14786430903074771 ↗
8. Modeling abnormal strain states in ferroelastic systems: the role of point defects10.1103/PhysRevLett.105.205702 ↗
9. Ren · 2012 · 201
10. Shape memory effect and superelasticity in a strain glass alloy10.1103/PhysRevLett.97.225703 ↗
11. Strain glass in ferroelastic systems: premartensitic tweed versus strain glass10.1080/14786430903074771 ↗
12. Strain glass in Fe-doped Ti–Ni10.1016/j.actamat.2010.07.040 ↗
13. Strain glass and ferroic glass–unusual properties from glassy nano-domains10.1002/pssb.201451351 ↗
14. Glatter · 1982 · 222
15. Phase transformation and precipitation of an Al–Cu alloy during non-isothermal heating studied by in situ small-angle and wide-angle scattering10.1016/j.jallcom.2013.04.201 ↗
16. Resolution of structural transformation of intermediates in Al–Cu alloys during non-isothermal precipitation10.1557/jmr.2014.46 ↗
17. Precipitation kinetics and transformation of metastable phases in Al–Mg–Si alloys10.1016/j.actamat.2006.06.005 ↗
18. Compositional evolution of Q-phase precipitates in an aluminum alloy10.1016/j.actamat.2014.05.001 ↗
19. Temporal evolution of coherent precipitates in an aluminum alloy W319: a correlative anisotropic small angle X-ray scattering, transmission electron microscopy and atom-probe tomography study10.1016/j.actamat.2016.06.043 ↗
20. Quantitative description of the T1 formation kinetics in an Al-Cu-Li alloy using differential scanning calorimetry, small-angle X-ray scattering and transmission electron microscopy10.1080/14786435.2013.878047 ↗
21. Microstructure mapping of a friction stir welded AA2050 Al–Li–Cu in the T8 state10.1080/14786435.2014.887862 ↗
22. Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
23. Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. microstructure evolution and mechanical properties10.1016/S1359-6454(98)00293-6 ↗
24. Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments10.1016/S1359-6454(03)00429-4 ↗
25. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al–Zn–Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
26. Quantitative measurements of dynamic precipitation during fatigue of an Al–Zn–Mg–(Cu) alloy using small-angle X-ray scattering10.1016/j.actamat.2014.04.027 ↗
27. δ′ precipitation in Al–9.7 at% Li alloy using small-angle X-ray scattering10.1016/S0925-8388(99)00093-6 ↗
28. In situ small-angle scattering study of the precipitation kinetics in an Al–Zr–Sc alloy10.1016/j.actamat.2006.12.015 ↗
29. High-throughput in-situ characterization and modeling of precipitation kinetics in compositionally graded alloys10.1016/j.actamat.2015.08.061 ↗
30. Influence of elastic anisotropy on structural nanoscale textures10.1103/PhysRevLett.100.165707 ↗
31. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
32. Honma · 1987 · 98
33. Past and present of time-of-flight small-angle neutron scattering at IBR-210.1088/1742-6596/351/1/012024 ↗
34. JCPDS · 1989
35. JCPDS · 1986
36. A new calibration method for the X-ray powder diffraction study of shape memory alloys10.1002/pssa.2211480204 ↗
37. Structural study of R-phase in Ti-50.23 at.% Ni and Ti-47.75 at.% Ni-1.50 at.% Fe alloys10.2320/matertrans1989.38.11 ↗
38. Transformation behaviour of a Ti50Ni47Fe3 alloy I. Premartensitic phenomena and the incommensurate phase10.1080/01418618308243106 ↗
39. Heterogeneities and strain glass behavior: role of nanoscale precipitates in low-temperature-aged Ti48.7Ni51.3 alloys10.1103/PhysRevB.87.104110 ↗
40. The effect of precipitation hardening on the Ms temperature in a Ti49.2Ni50.8 alloy10.1016/0956-716X(91)90445-7 ↗
41. High temperature strain glass in Ti50(Pd50−xCrx) alloy and the associated shape memory effect and superelasticity10.1063/1.3249580 ↗
42. Stress dependent transforming behaviors and associated functional properties of a nano-precipitates induced strain glass alloy10.1016/j.jallcom.2014.10.142 ↗
43. Zr–Al–Ni amorphous alloys with high glass transition temperature and significant supercooled liquid region10.2320/matertrans1989.31.177 ↗
44. Heat does not come in different colours: entropy–enthalpy compensation, free energy windows, quantum confinement, pressure perturbation calorimetry, solvation and the multiple causes of heat capacity effects in biomolecular interactions10.1016/S0301-4622(01)00222-8 ↗
45. Self-consistent equations for calculating the ideal gas heat capacity, enthalpy, and entropy10.1016/0378-3812(81)85002-9 ↗
46. Evaluation of 3D small-angle scattering from non-spherical particles in single crystals10.1107/S0021889893006296 ↗
47. A new method for evaluating the size of plate-like precipitates by small-angle scattering10.1107/S0021889812039891 ↗
48. Reduction and analysis of SANS and USANS data using IGOR Pro10.1107/S0021889806035059 ↗
49. The magic thicknesses of θ′ precipitates in Sn-microalloyed Al–Cu10.1016/j.actamat.2011.10.015 ↗
50. Discontinuity of GP (I) zone and θ′-phase in an Al-Cu alloy10.1016/S1359-6462(99)00137-2 ↗
51. Precipitation behavior of an Al–Cu alloy during isothermal aging at low temperatures10.1016/j.matlet.2004.10.058 ↗
52. The influence of Cu/Li ratio on precipitation in Al–Cu–Li–x alloys10.1016/j.actamat.2012.12.041 ↗
53. Small-angle X-ray scattering study of Zr 4 (Fe, Cr) precipitate in beta-quenched zircaloy-410.1016/0956-716X(95)00065-4 ↗
54. Kinetics of clustering in some aluminum alloys10.1016/0001-6160(60)90114-0 ↗