journal article·2018-01

Modified structural characteristics and enhanced electrochemical properties of oxygen-deficient Li 2 MnO 3-δ obtained from pristine Li 2 MnO 3

Xiao Tan, Rui Liu, Congxin Xie, Qiang Shen

Publisher page

Abstract

Abstract Lithium-rich manganese(IV) oxide Li2MnO3 has hardly any activity as the cathode active substance of lithium-ion batteries (LIBs) but its reversible capacity can be greatly improved by introducing oxygen deficiencies. After the solid-state heat treatment of nanocrystalline Li2MnO3 by sodium borohydride (NaBH4), the resulting Li2MnO3-δ crystallites comparatively acquire distinguishable appearances in color and shape and slight differences in surface composition and lattice structure. As a LIB cathode within the potential range of 2.5–4.7 V, at 20 mA g−1 pristine Li2MnO3 gives the specific discharge capacities of 3.3, 5.0 and 7.4 mAh·g−1 in the 1st, 10th and 100th cycles, while the derivative Li2MnO3-δ delivers the relatively high values of 64.8, 103.8 and 140.2 mAh·g−1 in the 1st, 10th and 120th cycles, respectively. Aside from the similar phenomenon of gradual electrochemical activation, substituting Li2MnO3-δ for Li2MnO3 means the great enhancements of charge-transfer ability and electrochemical performances. Especially, the cationic-anionic redox mechanisms of Li2MnO3 and Li2MnO3-δ are similar to each other, suggesting a possible solution to prepare high-performance xLi2MnO3-δ·(1-x)LiMO2 solid solutions for application purposes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Positive electrode materials for Li-ion and Li-batteries10.1021/cm902696j ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries10.1039/c2jm14305d ↗
4. Direct atomic-resolution observation of two phases in the Li1.2Mn0.567Ni0.166Co0.067O2 cathode material for lithium-ion batteries10.1002/anie.201301236 ↗
5. A comparison of preparation method on the electrochemical performance of cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 for lithium ion battery10.1016/j.electacta.2010.12.049 ↗
6. Synthesis and electrochemical properties of layered lithium transition metal oxides10.1039/C0JM03388J ↗
7. The origin of electrochemical activity in Li2MnO310.1039/b207945c ↗
8. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3−LiCo1/3Ni1/3Mn1/3O210.1021/ja108588y ↗
9. A new active Li–Mn–O compound for high energy density Li-ion batteries10.1038/nmat4479 ↗
10. High performance Li2Ru1–yMnyO3 (0.2 ≤y≤ 0.8) cathode materials for rechargeable lithium-ion batteries: their understanding10.1021/cm400193m ↗
11. Evidence for anionic redox activity in a tridimensional-ordered Li-rich positive electrode β-Li2IrO310.1038/nmat4864 ↗
12. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
13. Reversible anionic redox chemistry in high-capacity layered-oxide electrodes10.1038/nmat3699 ↗
14. Direct synthesis of oxygen-deficient Li2MnO3-x for high capacity lithium battery electrodes10.1016/j.jpowsour.2012.05.061 ↗
15. Mechanism of oxygen vacancy on impeded phase transformation and electrochemical activation in inactive Li2MnO310.1002/celc.201600067 ↗
16. Oxygen vacancies and ordering of d-levels control voltage suppression in oxide cathodes: the case of spinel LiNi0.5Mn1.5O4-δ10.1002/adfm.201301205 ↗
17. CNTs grown on oxygen-deficient anatase TiO2-δ as high-rate composite electrode material for lithium ion batteries10.1016/j.elecom.2012.09.031 ↗
18. Effects of oxygen vacancies on the electrochemical performance of tin oxide10.1039/C2TA01012G ↗
19. Oxygen vacancies enhancing capacitive properties of MnO2 nanorods for wearable asymmetric supercapacitors10.1016/j.nanoen.2014.06.013 ↗
20. Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3-x10.1038/nmat4810 ↗
21. A new hematite photoanode doping strategy for solar water splitting: oxygen vacancy generation10.1039/c2cp44352j ↗
22. High interfacial lithium storage capability of hollow porous Mn2O3 nanostructures obtained from carbonate precursors10.1039/C5CC00402K ↗
23. A new route for the synthesis of Li2MnO3 based cathode material with enhanced first cycle efficiency and cycleability for lithium ion batteries10.1016/j.jpowsour.2014.03.069 ↗
24. Reinvestigation of Li2MnO3 structure: electron diffraction and high resolution TEM10.1021/cm900998n ↗
25. High-energy ‘composite’ layered manganese-rich cathode materials via controlling Li2MnO3 phase activation for lithium-ion batteries10.1039/c2cp40745k ↗
26. Electrochemical activation of Li2MnO3 at elevated temperature investigated by in situ Raman microscopy10.1016/j.electacta.2013.07.130 ↗
27. Study of the nanosized Li2MnO3: electrochemical behavior, structure, magnetic properties, and vibrational modes10.1016/j.electacta.2013.03.029 ↗
28. Structural analysis of Li2MnO3 and related Li-Mn-O materials10.1149/1.3609849 ↗
29. Carbon monoxide oxidation catalysed by exotemplated manganese oxides10.1007/s10562-009-0251-1 ↗
30. Mn 3s exchange splitting in mixed-valence manganites10.1103/PhysRevB.65.113102 ↗
31. Surface chemistry of metal oxide coated lithium manganese nickel oxide thin film cathodes studied by XPS10.1016/j.electacta.2012.11.120 ↗
32. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
33. Mechanism of electrochemical activity in Li2MnO310.1021/cm030047u ↗
34. Oxygen nonstoichiometry in Li2MnO3: an alternative explanation10.1021/cm040186r ↗
35. Self-adjusted oxygen-partial-pressure approach to the improved electrochemical performance of electrode Li[Li0.14Mn0.47Ni0.25Co0.14]O2 for lithium-ion batteries10.1039/c3ta11040k ↗
36. Ambivalent effect of oxygen vacancies on Li2MnO3: a first-principles study10.1149/2.079202jes ↗
37. The origins and mechanism of phase transformation in bulk Li2MnO3: first-principles calculations and experimental studies10.1039/C5TA00944H ↗
38. Structural changes in Li2MnO3 cathode material for Li-ion batteries10.1002/aenm.201300998 ↗
39. Understanding of surface redox behaviors of Li2MnO3 in Li-ion batteries: first-principles prediction and experimental validation10.1002/cssc.201500706 ↗
40. Fluorination induced the surface segregation of high voltage spinel on lithium-rich layered cathodes for enhanced rate capability in lithium ion batteries10.1021/acsami.5b10759 ↗
41. Synthesis and electrochemical properties of xLi2MnO3. (1-x)Li2MnO2 composite cathode materials derived from partially reduced Li2MnO310.1016/j.jpowsour.2013.10.139 ↗
42. Electrode−electrolyte interface in Li-ion batteries: current understanding and new insights10.1021/acs.jpclett.5b01727 ↗