Surface chemical analysis of CuO nanofiber composite electrodes at different stages of lithiation/delithiation
Source abstract
Abstract
Abstract High aspect ratio, electrospun CuO nanofibers have been fabricated and tested for its electrochemical performance as lithium ion battery anode. These nanofibers are composed of CuO nanoparticles about 35–40 nm in size forming good inter-connected network. Fabricated half cells maintained specific capacity of 310 mAh g −1 at 1C rate for 100 cycles and stabilized capacity of about 120 mAh g −1 at 5C rate for 1000 cycles. Ex situ x-ray photoelectron spectroscopy (XPS) was performed to understand the electrodes surface chemical changes at the end of first discharge, first charge and after tenth charge. The solid electrolyte interface (SEI) layer comprised of LiF, Li 2 CO 3 and Li 2 O while their quantity varied depending on the stage of lithiation/delithiation. Initially, no copper signal is observed on the surface of the SEI layer. However, in situ sputtering of the electrodes in the XPS chamber revealed that at the end of first discharge, formation Cu 0 with detectable fraction of Li x CuO 2 and hydroxide in the SEI layer. At the end of first charge, a large fraction of Cu 2 O phase with a small fraction of hydroxide is observed. At the end of 10th charge no change in SEI layer content but increase in thickness was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Copper-based nanomaterials and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
2. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
3. Nano-sized transition-metal oxides as negative electrode materials for lithium-ion batteries10.1038/35035045 ↗
4. Design and construction of three-dimensional CuO/polyaniline/rGO ternary hierarchical architectures for high performance supercapacitors10.1016/j.jpowsour.2015.12.059 ↗
5. Rose rock-shaped nano Cu2O anchored graphene for high-performance supercapacitors via solvothermal route10.1016/j.jpowsour.2016.04.006 ↗
6. Effect of cycling rate, particle size and transport properties on lithium-ion cathode performance10.1016/j.ijheatmasstransfer.2010.04.017 ↗
7. Nanoplate and mulberry-like porous shape of CuO as anode materials for secondary lithium ion battery10.1016/j.electacta.2016.04.116 ↗
8. A novel and facile method to prepare porous hollow CuO and Cu nanofibers based on electrospinning10.1039/c0ce00980f ↗
9. Facile synthesis of graphene-like copper oxide nanofilms with enhanced electrochemical and photocatalytic properties in energy and environmental applications10.1021/acsami.5b01451 ↗
10. Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries10.1016/j.jpowsour.2009.07.022 ↗
11. One-step fabrication of CuO nanoribbons array electrode and its excellent lithium storage performance10.1016/j.electacta.2009.05.038 ↗
12. Nano-structured carbon-coated CuO hollow spheres as stable and high rate anodes for lithium-ion batteries10.1039/c3ta13698a ↗
13. Faciles fabrication of TiO2 nanoparticle-TiO2 nanofiber composites by co-electrospinning-electrospraying for dye-sensitized solar cells10.1016/j.jechem.2015.11.001 ↗
14. TiO2 nanofibers resembling ‘yellow bristle grass’ in morphology by a soft chemical transformation10.1039/C5DT01027F ↗
15. High aspect ratio electrospun CuO nanofibers as anode material for lithium-ion batteries with superior cycleability10.1021/jp3053949 ↗
16. Electrospun NiO nanofibers as high performance anode material for Li-ion batteries10.1016/j.jpowsour.2012.11.050 ↗
17. Synthesis and characterization of CuO electrospum nanofiber using poly (vinyl acetate)/Cu (CH3COO)2 annealing method10.5185/amlett.2013.2425 ↗
18. Electrospun titania-based fibers for high areal capacity Li-ion battery anodes10.1016/j.jpowsour.2015.02.036 ↗
19. Comprehensive X-ray photoelectron spectroscopy study of the conversion reaction mechanism of CuO in lithiated thin film electrodes10.1021/jp3119633 ↗
20. High electrochemical performance and lithiation-delithiation phase evolution in CuO thin films for Li-ion storage10.1039/C5TA02524A ↗
21. CuO nanostructures: synthesis, characterization, growth mechanisms, fundamental properties, and applications10.1016/j.pmatsci.2013.09.003 ↗
22. Revealing the conversion mechanism of CuO nanowires during lithiation–delithiation by in situ transmission electron microscopy10.1039/c2cc30643c ↗
23. Reaction mechanism and surface film formation of conversion materials for lithium-and sodium-ion batteries: an XPS case study on sputtered copper oxide (CuO) thin film model electrodes10.1021/acs.jpcc.5b10642 ↗
24. Synthesis of graphene-wrapped CuO hybrid materials by CO2 mineralization10.1039/c2gc35560d ↗
25. CuO/C microspheres as anode materials for lithium ion batteries10.1016/j.electacta.2011.05.072 ↗
26. Facile approach to synthesize CuO/reduced graphene oxide nanocomposite as anode materials for lithium-ion battery10.1016/j.jpowsour.2012.11.112 ↗
27. Li- and Na-reduction products of meso-Co3O4 form high-rate, stably cycling battery anode materials10.1039/C4TA02684E ↗
28. SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: the role of electrode preparation, FEC addition and binders10.1039/C5CP03672K ↗
29. Characterizing solid electrolyte interphase on Sn anode in lithium ion battery10.1149/2.0121513jes ↗
30. The effect of fluoroethylene carbonate as an additive on the solid electrolyte interphase on silicon lithium-ion electrodes10.1021/acs.chemmater.5b01627 ↗