Study of lithium diffusivity in amorphous silicon via finite element analysis
Source abstract
Abstract
Abstract As an anode active material, Si experiences large deformations during battery cycling, which has been cited as a primary cause for the electrode fracture and thus capacity fading. The problems caused by the electrode deformations can be remedied through electrode design, and the numerical models will greatly facilitate this design process. However, the lack of key material properties for Si/LixSi, especially the Li diffusivity in Si, has prevented the efficient use of such numerical tools in the design of lithium-ion batteries with Si anodes. In this work, finite element (FE) analysis was used to study the Li diffusivity in amorphous Si (a-Si) anodes. To simulate the large deformation, a large strain based formulation for the concentration induced volume expansion was proposed. The Li diffusion and volume expansion were coupled and solved in COMSOL Multiphysics®. By comparing with the lithiation experimental observations for the a-Si nanospheres, the Li diffusivity was estimated to be on the order of 2.0 × 10 − 15 m 2 /s for the Li-rich phase and 2.0 × 10 − 17 m 2 /s for the Li-poor phase. These values were further validated by comparing the thickness growth of the Li-rich phase and the lithiation time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Department of Energy · 2007
2. Increased cycling efficiency and rate capability of copper-coated silicon anodes in lithium-ion batteries10.1016/j.jpowsour.2010.06.043 ↗
3. Phase-separated silicon–tin nanocomposites for high capacity negative electrodes in lithium ion batteries10.1016/j.jpowsour.2012.04.028 ↗
4. Arrays of sealed silicon nanotubes as anodes for lithium ion batteries10.1021/nl100086e ↗
5. Carbon−silicon core−shell nanowires as high capacity electrode for lithium ion batteries10.1021/nl901670t ↗
6. Alumina-coated patterned amorphous silicon as the anode for a lithium-ion battery with high coulombic efficiency10.1002/adma.201102568 ↗
7. Porous doped silicon nanowires for lithium ion battery anode with long cycle life10.1021/nl300206e ↗
8. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
9. Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control10.1038/nnano.2012.35 ↗
10. Electrospun core–shell fibers for robust silicon nanoparticle-based lithium ion battery anodes10.1021/nl203817r ↗
11. Dynamics of electrochemical lithiation/delithiation of graphene-encapsulated silicon nanoparticles studied by in-situ TEM10.1038/srep04322 ↗
12. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
13. Solution-grown silicon nanowires for lithium-ion battery anodes10.1021/nn901409q ↗
14. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
15. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
16. Analysis of the lithium-ion insertion silicon composite electrode/separator/lithium foil cell10.1149/1.3589301 ↗
17. A microstructural resolved model for the stress analysis of lithium-ion batteries10.1149/2.082405jes ↗
18. Intercalation-induced stress and heat generation within single lithium-ion battery cathode particles10.1149/1.2926617 ↗
19. Mesoscale modeling of a Li-ion polymer cell10.1149/1.2778285 ↗
20. Numerical modeling of electrochemical–mechanical interactions in lithium polymer batteries10.1016/j.compstruc.2009.08.005 ↗
21. The effect of battery design parameters on heat generation and utilization in a Li-ion cell10.1016/j.electacta.2012.07.081 ↗
22. The mixing mechanism during lithiation of Si negative electrode in Li-ion batteries: an ab initio molecular dynamics study10.1021/nl203302d ↗
23. Determination of the diffusion coefficient of lithium ions in nano-Si10.1016/j.ssi.2008.12.015 ↗
24. Measurement of the diffusion rate of Li in silicon by the use of bipolar cells10.1016/j.jpowsour.2007.06.115 ↗
25. Lithium intercalation into amorphous-silicon thin films: an electrochemical-impedance study10.1134/S1023193506070032 ↗
26. Potentiostatic intermittent titration technique for electrodes governed by diffusion and interfacial reaction10.1021/jp207919q ↗
27. Li-ion diffusion in amorphous Si films prepared by RF magnetron sputtering: a comparison of using liquid and polymer electrolytes10.1016/j.matchemphys.2009.11.031 ↗
28. Properties of amorphous Si thin film anodes prepared by pulsed laser deposition10.1016/j.materresbull.2006.10.007 ↗
29. Measurement and modeling of the mechanical and electrochemical response of amorphous Si thin film electrodes during cyclic lithiation10.1016/j.jmps.2013.10.005 ↗
30. In situ TEM of two-phase lithiation of amorphous silicon nanospheres10.1021/nl3044508 ↗
31. Bower · 2009
32. Large plastic deformation in high-capacity lithium-ion batteries caused by charge and discharge10.1111/j.1551-2916.2011.04432.x ↗
33. Cyclic plasticity and shakedown in high-capacity electrodes of lithium-ion batteries10.1016/j.ijsolstr.2012.12.019 ↗
34. A finite deformation stress-dependent chemical potential and its applications to lithium ion batteries10.1016/j.jmps.2012.03.008 ↗
35. Combining mechanical and chemical effects in the deformation and failure of a cylindrical electrode particle in a Li-ion battery10.1016/j.ijsolstr.2014.11.006 ↗
36. Anisotropic compositional expansion and chemical potential for amorphous lithiated silicon under stress tensor10.1038/srep01615 ↗
37. A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell10.1016/j.jmps.2011.01.003 ↗
38. A multi-scale approach for the stress analysis of polymeric separators in a lithium-ion battery10.1016/j.jpowsour.2010.06.020 ↗
39. Alloy design for lithium-ion battery anodes10.1149/1.2752985 ↗
40. Jirasek · 2002
41. Fundamental investigation of Si anode in Li-ion cells
42. In situ X-ray diffraction studies of (De)lithiation mechanism in silicon nanowire anodes10.1021/nn301339g ↗
43. Ultrafast electrochemical lithiation of individual Si nanowire anodes10.1021/nl200412p ↗
44. Revealing lithium–silicide phase transformations in nano-structured silicon-based lithium ion batteries via in situ NMR spectroscopy10.1038/ncomms4217 ↗
45. Two-phase electrochemical lithiation in amorphous silicon10.1021/nl304379k ↗
46. Atomistic mechanisms of phase boundary evolution during initial lithiation of crystalline silicon10.1021/jp502523t ↗
47. Lithium-assisted plastic deformation of silicon electrodes in lithium-ion batteries: a first-principles theoretical study10.1021/nl201501s ↗
48. Elastic softening of amorphous and crystalline Li–Si phases with increasing Li concentration: a first-principles study10.1016/j.jpowsour.2010.04.044 ↗
49. Reactive flow in silicon electrodes assisted by the insertion of lithium10.1021/nl302261w ↗
50. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation10.1016/j.jpowsour.2010.02.013 ↗
51. Robustness of amorphous silicon during the initial lithiation/delithiation cycle10.1016/j.jpowsour.2014.02.032 ↗