Interaction of metallic SOFC interconnect materials with glass–ceramic sealant in various atmospheres
Source abstract
Abstract
Abstract The interaction of the metallic parts of a solid oxide fuel cell (SOFC) and the glass–ceramic sealant was characterized under various atmospheric conditions by a quick and simple test method. The metallic material used was a high-chromium steel specially developed for SOFC applications (two different compositions) designated Crofer22APU 1st and JS-3 while the glass–ceramic composed of BaO–CaO–Al 2 O 3 –SiO 2 (BCAS, known as glass A) was also designed for SOFC use. Air, humidified air and humidified hydrogen were used as atmospheres. The tests were carried out at an SOFC operating temperature of 800 °C for times varying from 1 to 500 h. The results show that air or humidified air does not lead to enhance negative interaction effects, neither in the metallic nor in the glass–ceramic material. In contrast interaction under humidified hydrogen causes internal oxidation in the steel. However, the corrosion intensity is much higher in the steel material where some special minor constituents were added, especially aluminium and silicon, than in the Al- and Si-free steel material. Thus the final purity of the metallic material is of crucial importance for long-term use in SOFCs. Additionally, the presence of either humid hydrogen or humid hydrogen and a low oxygen partial pressure in the surrounding atmosphere has a detrimental effect on the interaction behaviour of the glass–ceramic and metallic parts of the SOFC. The test method presented here can act as a first fast and simple screening test to characterize the interaction of the metallic and glass–ceramic parts of an SOFC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Reaction of SOFC components with sealing materials10.5796/electrochemistry.61.760 ↗
2. Chemical interactions between aluminosilicate base sealants and the components on the anode side of solid oxide fuel cells10.1149/1.1467945 ↗
3. Influence of sealing material on nickel/YSZ solid oxide fuel cell anodes
4. Chemical compatibility of barium–calcium–aluminosilicate sealing glasses with the ferritic stainless steel interconnect in SOFCs10.1149/1.1590325 ↗
5. Chemical interactions of barium–calcium–aluminosilicate-based sealing glasses with oxidation resistant alloys10.1016/S0167-2738(03)00160-7 ↗
6. Chemical stability of glass seal interfaces in intermediate temperature solid oxide fuel cells10.1361/10599490419298 ↗
7. Metallic materials for interconnects in SOFC systems10.3184/096034003782749071 ↗
8. V.A.C. Haanappel, V. Shemet, I.C. Vinke, W.J. Quadakkers, A novel method to evaluate the suitability of glass sealant–alloy combinations under SOFC stack conditions, J. Power Sources 141 (2005) 102–107.10.1016/j.jpowsour.2004.08.053 ↗
9. V.A.C. Haanappel, V. Shemet, I.C. Vinke, S.M. Gross, T. Koppitz, N.H. Menzler, M. Zahid, W.J. Quadakkers, Evaluation of the suitability of various glass sealant–alloy combinations under SOFC stack conditions, J. Mater. Sci. 40 (2005) 1583–1592.10.1007/s10853-005-0657-0 ↗
10. Chemical interactions between glass–ceramic sealants and high chromium containing steel
11. Electrically insulating high-temperature joints for ferritic chromium steel
12. Crofer22APU, Material Data Sheet No. 8005, June 2004 edition, ThyssenKrupp VDM, Werdohl, Germany.
13. P. Geasee, Development of crystallizing glass sealants for high temperature planar solid oxide fuel cells, Ph.D. Thesis, RWTH Aachen, No. D 82, 2003. http://www.bth.rwth-aachen.de/job/disslist.pl.
14. P. Huczkowski, N. Christiansen, V. Shemet, J. Piron-Abellan, L. Singheiser, W.J. Quadakkers, Oxidation induced lifetime limits of chromia forming ferritic interconnector steels, J. Fuel Cell Sci. Technol. 1 (1) (2004) 30–34.10.1115/1.1782925 ↗
15. V.A.C. Haanappel, V. Shemet, S.M. Gross, T. Koppitz, N.H. Menzler, M. Zahid, W.J. Quadakkers, Behaviour of various glass–ceramic sealants with ferritic steels under simulated SOFC stack conditions, J. Power Sources, accepted for publication, available online as article in press since 5 April 2005.10.1016/j.jpowsour.2005.02.015 ↗
16. Oxidation limited life times of chromia forming ferritic steels10.1002/maco.200303798 ↗