Parameter setting and analysis of a dynamic tubular SOFC model
Source abstract
Abstract
Abstract An improved one-dimensional dynamic model of a tubular SOFC stack capable of system simulation in the virtual test bed (VTB) simulation environment is presented in this paper. This model is based on the electrochemical and thermal modeling, accounting for the voltage losses and temperature dynamics. The modeling of an external reformer is also included in this study. A detailed parametric analysis of working conditions and cell configuration of the solid oxide fuel cell (SOFC) stack is the main focus of this paper. The following operating parameters are investigated: pressure ratio, temperature, mass flow rate, external reforming degree and stream to carbon (S/C) ratio. The cell geometric parameters studied include cell diameter and cell length. Elevated operating pressure improves the cell performance. Whereas, higher operating temperature decreases both the Nernst potential and the irreversible losses, resulting in an initial increase then a decrease in cell efficiency. It was found that a higher S/C ratio yields a lower H 2 concentration and partial pressure, which has a negative effect on the Nernst potential. Increased cell diameter is found to increase the power due to a larger activation area at the same time and due to longer current path length there is an increase in the ohmic loss. Increased length of the cell has the undesired affect of an increased pressure drop.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Hirschenhofer · 1998
2. Modeling of simple hybrid solid oxide fuel cell and gas turbine power plant10.1016/S0378-7753(02)00051-4 ↗
3. Multi-level modeling of SOFC-gas turbine hybrid system10.1016/S0360-3199(02)00160-X ↗
4. Parameter setting for a tubular SOFC simulation model
5. An integrated SOFC plant dynamic model for power system simulation10.1016/S0378-7753(99)00430-9 ↗
6. Dynamic and transient analysis of power distribution systems with fuel cells—part I: fuel-cell dynamic model
7. G. Cokkinides, B. Beker, VTB Model Developer's Guide [online]. Available: http://vtb.engr.sc.edu/modellibrary/modeldev.asp.
8. W. Jiang, J. Khan, R.A. Dougal, Dynamic centrifugal compressor model for system simulation. J. Power Sources, 2005, in press.10.1016/j.jpowsour.2005.10.093 ↗
9. Three dimensional and time dependent simulation of a planar solid oxide fuel cell stack10.1016/0378-7753(93)01833-4 ↗
10. U.G. Bossel, Final Report on SOFC Data Facts & Fig.s, Swiss Federal Office of Energy, Berne, CH, 1992.
11. Reid · 1987
12. Transient modeling and simulation of tubular solid oxide fuel cells10.1109/60.790946 ↗
13. Blomen · 1993
14. Fuel Cell HandBook, fifth ed., EG&G Services Parsons Inc., U.S. Department of Energy, 2000.
15. An explicit dynamic model for direct reforming carbonate fuel cell stack
16. N.F. Bessett, Modeling and Simulation for Solid Oxide Fuel Cell Power Systems. Ph.D. Thesis 1994.
17. The development of heat transfer and gas flow modeling in the solid oxide fuel cells
18. Hirschenhofer · 1998
19. Freech · 2004
20. W. Jiang, R. Fang, R.A. Dougal, J. Khan, Thermo-electric model of a tubular SOFC for dynamic simulation, J. Energy Resour. Technol., ASME, 2006, submitted for publication.
21. Singhal · 2003