Water and thermal management in a single PEM fuel cell with non-uniform stack temperature
Source abstract
Abstract
A non-isothermal, non-isobaric water and thermal management model with phase change has been developed to simulate the mass and energy (sensible heat, latent heat, chemical reaction energy, electrical energy) transfer processes inside a PEM fuel cell unit with a non-uniform stack temperature (hereafter the stack temperature has the same meaning of the cell temperature since only single cell is considered). Based on this model, the following parameters can be predicted along the channels on both cathode and anode sides: current density, output voltage, stack temperature, stream pressure and temperatures, stream velocity, relative humidity, water vapor mole fraction, water liquid fraction, density, viscosity, Reynolds number, required pumping power, and so on. Also, the results from uniform stack temperature model and non-uniform stack temperature model are compared in this research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Kenny · 1998
2. Assessment of environmental benefits of transport and stationary fuel cells10.1016/S0378-7753(99)00445-0 ↗
3. CARB, Proposed Amendments to the California Zero Emission Vehicle Program Regulations, 2000.
4. T. Woegerer, Research, design and construction of proton exchange membrane fuel cell, E.S.419-Project Report, The University of Western Ontario, 1998.
5. Water and thermal management in solid–polymer–electrolyte fuel cells10.1149/1.2220960 ↗
6. A water and heat management model for proton-exchange-membrane fuel cells10.1149/1.2220792 ↗
7. An along-the channel model for proton exchange membrane fuel cells10.1149/1.1838431 ↗
8. Analysis and performance of water and thermal management in proton exchange membrane fuel cells10.1016/0013-4686(94)00289-D ↗
9. Performance modeling of BALLARD MARK IV solid polymer electrolyte fuel cell I. Mechanistic model development10.1149/1.2043866 ↗
10. Performance modeling of Ballard Mark IV solid polymer electrolyte fuel cell II. Empirical model development10.1149/1.2043959 ↗
11. An engineering model of proton exchange membrane fuel cell performance10.1007/s007770050014 ↗
12. Mathematical model of the PEMFC10.1023/A:1026534931174 ↗
13. Mathematical modeling and simulation of polymer electrolyte membrane fuel cells10.1002/fuce.200290004 ↗
14. A mathematical model for PEMFC in different flow modes10.1016/S0378-7753(03)00584-6 ↗
15. System level lumped-parameter dynamic modeling of PEM fuel cell10.1016/j.jpowsour.2003.12.064 ↗
16. Water and pressure effects on a single PEM fuel cell10.1016/j.jpowsour.2005.04.027 ↗
17. C. Yunus, B. Michael,;1; Thermodynamics—An Engineering Approach, 4th ed., The McGraw-Hill Companies, IBSN: 0-07-238332-1.
18. Analysis of free energy and entropy changes for half-cell reactions10.1149/1.2221123 ↗
19. 1981
20. 2002
21. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
22. Nafion/PTFE composite membranes for fuel cell applications10.1016/S0376-7388(02)00503-3 ↗