journal article·2003-04-10

Recovery of heavy metals from spent Ni–Cd batteries by a potentiostatic electrodeposition technique

C Yang

Journal of Power Sources· Volume 115· Issue 2
Publisher page

Abstract

Abstract Two heavy metals, Cd and Ni, have been separately recovered from spent AA-size Ni–Cd batteries by the potentiostatic electrodeposition and chemical precipitation methods, respectively. Various types and concentrations of HCl, H 2 SO 4 , and HNO 3 acids had been used as leach extractants. Experimental results indicate that the acid with the best leach capability is 4 M HCl. Three complexing reagents of NH 3 , sodium acetate, sodium citrate have been chosen and tested. The most effective buffer is sodium citrate. The optimum mole ratio of metallic ion to citrate ion is 1:1. The recovery process for Cd metal is conducted by the potentiostatic electrodeposition in a leach electrolyte with a sodium citrate complex. The optimum applied potential for Cd recovery is in the range −1100 to −1120 mV (versus saturated calomel electrode (SCE)). The current efficiency for the recovery process is between 70 and 90% and depends strongly on the process parameters, e.g. liquor, concentration, applied potential, temperature, type of complex reagents, mole ratio, mass-transfer rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Extraction and Separation Processes · Recycling and Waste Management Techniques · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.