Polybenzimidazole-multiwall carbon nanotubes composite membranes for polymer electrolyte membrane fuel cells
Source abstract
Abstract
Abstract Polymer membranes are prepared as a composite of polybenzimidazole and non-functionalized multiwall carbon nanotubes (PBI-CNT) and polybenzimidazole (PBI) only. Each is doped with H 3 PO 4 (PA) and used as a proton exchange membrane (PEM) as the electrolyte in a fuel cell. The proton conductivities at 180 °C for the doped PBI membrane (PBIPA) and the doped PBI-CNT membrane (PBICNTPA) are 6.3 × 10 −2 and 7.4 × 10 −2 Scm −1 respectively. A single fuel cell having these membranes as electrolyte has a Pt catalyzed hydrogen gas fed anode and a similar oxygen cathode without humidification of feed gases; the cell with the PBICNTPA membrane has higher open circuit voltage (0.96 V) than that with a PBIPA membrane (0.8 V) at 180 °C. The mechanical stability of the membrane improves with CNTs addition. The tensile strength of the composite PBI-CNT membrane with 1 wt.% CNTs loading is 32% higher and the Young's Modulus is 147% higher than the values for a membrane of PBI alone. The improvement in conductivity and mechanical properties in the composite membrane due to the CNT addition indicates that a PBI-CNT membrane is a good alternative as a membrane electrolyte in a PEMFC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The CO poisoning effect in PEMFCs operational at temperatures up to 200 °C10.1149/1.1619984 ↗
2. State of understanding of Nafion10.1021/cr0207123 ↗
3. Nafion and modified-Nafion membranes for polymer electrolyte fuel cells: an overview10.1007/s12034-009-0042-8 ↗
4. Nafion® perfluorinated membranes in fuel cells10.1016/j.jfluchem.2004.05.018 ↗
5. Cuppoletti · 2011 · 82
6. Zaidi · 2009
7. Influence of temperature and relative humidity on performance and CO tolerance of PEM fuel cells with Nafion®–Teflon®–Zr (HPO4)2 higher temperature composite membranes10.1016/j.electacta.2006.02.033 ↗
8. New, high temperature superacid zirconia-doped Nafion™ composite membranes10.1039/b702322g ↗
9. Composite fuel cell membranes based on an inert polymer matrix and proton-conducting hybrid silica particles10.1016/j.memsci.2009.04.022 ↗
10. Hybrid inorganic–organic proton conducting membranes based on Nafion, SiO 2 and triethylammonium trifluoromethanesulfonate ionic liquid10.1016/j.electacta.2009.05.079 ↗
11. Novel Nafion composite membranes with mesoporous silica nanospheres as inorganic fillers10.1016/j.jpowsour.2008.08.094 ↗
12. Proton conductivity of Nafion/ex situ Stöber silica nanocomposite membranes as a function of silica particle size and temperature10.1007/s10853-013-7839-y ↗
13. Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers10.1016/S0079-6700(00)00032-0 ↗
14. Properties and structure of SPEEK proton exchange membrane doped with nanometer CeO2 and treated with high magnetic field10.3144/expresspolymlett.2009.101 ↗
15. The effects of sulfonated poly (ether ether ketone) ion exchange preparation conditions on membrane properties10.3390/membranes3030182 ↗
16. Polymer electrolyte fuel cells using Nafion-based composite membranes with functionalized carbon nanotubes10.1002/anie.200704343 ↗
17. Hybrid acid–base polymer membranes prepared for application in fuel cells10.1016/j.jpowsour.2008.10.028 ↗
18. Brønsted acid–base and–polybase complexes as electrolytes for fuel cells under non-humidifying conditions10.1016/j.electacta.2005.02.038 ↗
19. Crosslinked sulfonated poly (arylene ether ketone) membranes bearing quinoxaline and acid–base complex cross-linkages for fuel cell applications10.1016/j.jpowsour.2010.10.039 ↗
20. Review of the proton exchange membranes for fuel cell applications10.1016/j.ijhydene.2010.05.017 ↗
21. Composite fuel cell membranes based on an inert polymer matrix and proton-conducting hybrid silica particles10.1016/j.memsci.2009.04.022 ↗
22. Polymer electrolyte fuel cells using Nafion-based composite membranes with functionalized carbon nanotubes10.1002/anie.200704343 ↗
23. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC)–A review10.1016/j.jpowsour.2012.11.126 ↗
24. Polybenzimidazole/acid complexes as high-temperature membranes
25. Properties, degradation and high temperature fuel cell test of different types of PBI and PBI blend membranes10.1016/j.memsci.2009.10.032 ↗
26. Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200–°C10.1016/j.jpowsour.2007.07.047 ↗
27. Improved polybenzimidazole films for H 3 PO 4-doped PBI-based high temperature PEMFC10.1016/j.memsci.2007.08.028 ↗
28. Preparation of polybenzimidazole-based membranes and their potential applications in the fuel cell system10.3390/en7031721 ↗
29. Synthesis and characterization of new thermally stable polybenzimidazoles and poly (amide-benzimidazole) s10.1016/S0014-3057(02)00081-2 ↗
30. Polybenzimidazole (PBI)-functionalized silica nanoparticles modified PBI nanocomposite membranes for proton exchange membranes fuel cells
31. Structure and properties of polybenzimidazole/silica nanocomposite electrolyte membrane: influence of organic/inorganic interface10.1021/am506260j ↗
32. Polybenzimidazole membranes modified with polyelectrolyte-functionalized multiwalled carbon nanotubes for proton exchange membrane fuel cells10.1039/c1jm10439j ↗
33. Improved performance of phosphonated carbon nanotube–polybenzimidazole composite membranes in proton exchange membrane fuel cells10.1039/c0jm04265j ↗
34. Thermally stable polybenzimidazole/carbon nano-tube composites for alkaline direct methanol fuel cell applications10.1016/j.jpowsour.2013.05.171 ↗
35. Superacid-doped polybenzimidazole-decorated carbon nanotubes: a novel high-performance proton exchange nanocomposite membrane10.1039/c3nr02886k ↗
36. Advanced technology for functionalization of carbon nanotubes10.1016/j.pnsc.2008.08.011 ↗
37. Vigolo · 2011
38. Jorio · 2007 · 111
39. Fourier transform infra-red spectroscopy on the thermo-oxidative degradation of polybenzimidazole and of a polybenzimidazole/polyetherimide blend10.1016/0032-3861(93)90618-K ↗
40. Multifunctional poly (2, 5-benzimidazole)/carbon nanotube composite films10.1002/pola.23862 ↗
41. Analysis of functional group sited on multi-wall carbon nanotube surface10.2174/1874088X01105010242 ↗
42. Nanostructured Pt functionlized multiwalled carbon nanotube based hydrogen sensor10.1021/jp0611525 ↗
43. Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology10.1021/cr020715f ↗
44. A polybenzimidazole/sulfonated graphite oxide composite membrane for high temperature polymer electrolyte membrane fuel cells10.1039/c1jm11159k ↗
45. Phosphoric acid doped polybenzimidazole membranes: physiochemical characterization and fuel cell applications10.1023/A:1017558523354 ↗
46. Synthesis and properties of phenylindane-containing polybenzimidazole (PBI) for high-temperature polymer electrolyte membrane fuel cells (PEMFCs)10.1016/j.jpowsour.2013.06.033 ↗
47. Ren · 2012
48. Preparation of polybenzimidazole/functionalized carbon nanotube nanocomposite films for use as protective coatings10.1002/pen.21618 ↗
49. One pot synthesis of multiwalled carbon nanotubes reinforced polybenzimidazole hybrids: preparation, characterization and properties10.1016/j.polymer.2009.10.044 ↗
50. “Sulfonated MWNT and imidazole functionalized MWNT/polybenzimidazole composite membranes for high-temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2012.10.111 ↗
51. Performance analysis and impedance spectral signatures of high temperature PBI–phosphoric acid gel membrane fuel cells10.1016/j.jpowsour.2006.02.094 ↗
52. Electrical test methods for on-line fuel cell ohmic resistance measurement10.1016/j.jpowsour.2006.02.086 ↗
53. Measuring conductivity of proton conductive membranes in the direction of thickness
54. Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology10.1021/cr020715f ↗
55. Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest10.1039/b922650h ↗