journal article·2015-11

A facile synthesis of zinc oxide/multiwalled carbon nanotube nanocomposite lithium ion battery anodes by sol–gel method

Hilal Köse, Şeyma Karaal, Ali Osman Aydın, Hatem Akbulut

Publisher page

Abstract

Abstract Free standing zinc oxide (ZnO) and multiwalled carbon nanotube (MWCNT) nanocomposite materials are prepared by a sol gel technique giving a new high capacity anode material for lithium ion batteries. Free-standing ZnO/MWCNT nanocomposite anodes with two different chelating agent additives, triethanolamine (TEA) and glycerin (GLY), yield different electrochemical performances. Field emission gun scanning electron microscopy (FEG-SEM), energy dispersive X-ray spectrometer (EDS), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) analyses reveal the produced anode electrodes exhibit a unique structure of ZnO coating on the MWCNT surfaces. Li-ion cell assembly using a ZnO/MWCNT/GLY free-standing anode and Li metal cathode possesses the best discharge capacity, remaining as high as 460 mAh g −1 after 100 cycles. This core–shell structured anode can offer increased energy storage and performance over conventional anodes in Li-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Crystalline carbon hollow spheres, crystalline carbon–SnO2 hollow spheres, and crystalline SnO2 hollow spheres: synthesis and performance in reversible Li-ion storage10.1021/cm052219o ↗
2. Preparation and electrochemical performance of SnO2@carbon nanotube core–shell structure composites as anode material for lithium-ion batteries10.1016/j.electacta.2011.10.055 ↗
3. Yolk-shell ZnO-C microspheres with enhanced electrochemical performance as anode material for lithium ion batteries10.1016/j.electacta.2014.02.003 ↗
4. Electrochemical performance of MWCNT reinforced ZnO anodes for Li-ion batteries10.1016/j.mee.2013.12.029 ↗
5. Structural, optical and electrical properties of ZnO nanorod array prepared by hydrothermal process
6. Electrical and optical properties of ZnO transparent conducting films by the sol-gel method10.1016/S0022-0248(02)01907-3 ↗
7. Electrochemical performance and morphology evolution of nanosized ZnO as anode material of Ni–Zn batteries10.1016/j.electacta.2005.10.017 ↗
8. Preparation and characterization of ZnO nanoparticles by a novel sol–gel route10.1016/j.matlet.2006.11.089 ↗
9. Low-temperature synthesis of ZnO nanoparticles by solid-state pyrolytic reaction10.1088/0957-4484/14/1/303 ↗
10. Porous ZnO nanosheets grown on copper substrates as anodes for lithium ion batteries10.1016/j.electacta.2011.03.129 ↗
11. In situ growth of mesoporous SnO2 on the multiwalled carbon nanotubes: a novel composite with porous-tube structure as anode for lithium batteries10.1002/adfm.200600739 ↗
12. Flexible free-standing carbon nanotube films for model lithium-ion batteries10.1016/j.carbon.2009.06.045 ↗
13. Free-standing SnO2/MWCNT nanocomposite anodes produced by different rate spin coatings for Li-ion batteries10.1016/j.ijhydene.2014.01.212 ↗
14. Lithium insertion into purified and etched multi-walled carbon nanotubes synthesized on supported catalysts by thermal CVD10.1016/j.carbon.2004.05.039 ↗
15. The effect of different organic gelating agents on grain size of ZnO nanoparticles10.12693/APhysPolA.125.338 ↗
16. Gas sensing characteristics of SnO2 thin films and analyses of sensor response by the gas diffusion theory10.1016/j.mseb.2009.07.008 ↗
17. Sol-gel synthesis of mesoporous titania using nonsurfactant organic compounds as templates10.1080/10587250008023613 ↗
18. Synthesis and characterization of mesoporous TiO2 with anatase wall10.1016/j.matlet.2003.10.006 ↗
19. Effect of additives on microstructure and photoluminescence properties of SnO2 nanometer thin film
20. Preparation of ZnO porous thin films by sol-gel method using PEG template10.1016/j.matlet.2005.06.064 ↗
21. The effect of oxidation treatment on the properties of MWCNT thin films10.1016/j.mseb.2009.09.019 ↗
22. Chemical oxidation of multiwalled carbon nanotubes10.1016/j.carbon.2008.02.012 ↗
23. Geometric control and tuneable pore size distribution of buckypaper and buckydiscs10.1016/j.carbon.2008.02.028 ↗
24. Free-standing single-walled carbon nanotube/SnO2 anode paper for flexible lithium-ion batteries10.1016/j.carbon.2011.10.049 ↗
25. Nanostructured electrodes for high-power lithium ion batteries10.1016/j.nanoen.2012.04.001 ↗
26. One-dimensional hierarchical structures composed of novel metal oxide nanosheets on a carbon nanotube backbone and their lithium-storage properties10.1002/adfm.201100781 ↗
27. Nanostructured electrodes for lithium-ion and lithium-air batteries: the latest developments, challenges, and perspectives10.1016/j.mser.2011.06.001 ↗
28. Improving anodes for lithium ion batteries10.1007/s11661-010-0438-5 ↗
29. Sol–gel preparation and electrochemical characterization of SnO2/MWCNTs anode materials for Li-ion batteries10.1016/j.apsusc.2013.01.055 ↗
30. Structure and electrochemical performance of ZnO/CNT composite as anode material for lithium-ion batteries10.1007/s10853-013-7336-3 ↗
31. Microstructural change of nano-SnO2 grain assemblages with the annealing temperature10.1103/PhysRevB.55.2666 ↗
32. X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
33. Carbon nanotubes (CNTs) as a buffer layer in silicon/CNTs composite electrodes for lithium secondary batteries10.1016/j.jpowsour.2006.07.062 ↗
34. Nano crystallıne ZnO thin films reınforced with MWCNT based buckypapers as negative electrodes for lithium ion batteries
35. A New approach to synthesis of free-standing ZnO/MWCNT nanocomposites by vacuum filtration10.12693/APhysPolA.125.426 ↗
36. A short footnote: circuit design for faradaic impedimetric sensors and biosensors10.1016/j.snb.2014.05.029 ↗
37. Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: a review10.1016/j.compscitech.2011.11.019 ↗