journal article·2019-05

Membrane dehydration with increasing current density at high inlet gas relative humidity in polymer electrolyte membrane fuel cells

N. Ge, R. Banerjee, D. Muirhead, J. Lee, H. Liu, P. Shrestha, A.K.C. Wong, J. Jankovic, M. Tam, D. Susac, J. Stumper, A. Bazylak

Publisher page

Abstract

Abstract The membrane hydration state of a polymer electrolyte membrane fuel cell is investigated in operando at high current densities (>1.5 A cm−2) for various inlet gas relative humidities (RH). The ohmic resistance, an indicator for membrane hydration, is found to have a non-monotonic dependence on current densities between 0 and 3.0 A cm−2, and the current density corresponding to the local minimum ohmic resistance is defined as the optimal hydration current density. While the relative thickness of the membrane increases with increasing inlet RH, an interesting observation was made whereby elevating the catalyst-coated membrane (CCM) temperature at current densities above the optimal hydration current density leads to membrane dehydration. Surprisingly, at high inlet gas RH values (70% and 100%) and high current densities, membrane dehydration results in membrane shrinkage (relative to its thickness at 0 A cm−2). We attribute the membrane dehydration and associated shrinkage to the reduced local RH at the CCM, even though the net water flux from the cathode to anode increases. The relative membrane thicknesses as a function of inlet RH conditions are determined from the low frequency arc time constants obtained via electrochemical impedance spectroscopy measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. U.S. Department of Energy · 2017
2. Effects of operation temperature and reactant gas humidity levels on performance of PEM fuel cells10.1016/j.rser.2016.01.040 ↗
3. Operation of Nafion-based PEM fuel cells with no external humidification: influence of operating conditions and gas diffusion layers10.1016/j.jpowsour.2004.04.010 ↗
4. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
5. Wu · 2008 · vol. 184 · 104
6. Transport in polymer-electrolyte membranes I. Physical model10.1149/1.1580822 ↗
7. Mench · Fuel Cell Engines · 200810.1002/9780470209769 ↗
8. Electro-osmotic drag coefficient and proton conductivity in Nafion® membrane for PEMFC10.1016/j.ijhydene.2009.09.013 ↗
9. Water uptake by and transport through Nafion® 117 membranes10.1149/1.2056194 ↗
10. Nanostructure/swelling relationships of bulk and thin-film PFSA ionomers10.1002/adfm.201600861 ↗
11. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
12. Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes10.1021/j100168a060 ↗
13. Water transport in liquid and vapour equilibrated NafionTM membranes10.1016/j.memsci.2009.04.018 ↗
14. Understanding water uptake and transport in Na fi on using X - ray microtomography10.1021/mz300651a ↗
15. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
16. Impact of interfacial water transport in PEMFCs on cell performance10.1016/j.electacta.2014.08.148 ↗
17. Thermal and water transfer in PEMFCs: investigating the role of the microporous layer10.1016/j.ijhydene.2013.11.105 ↗
18. Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells, Electrochim
19. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
20. Effect of interfacial water transport resistance on coupled proton and water transport across Nafion10.1021/jp204785t ↗
21. Operando μ-Raman study of the actual water content of perfluorosulfonic acid membranes in the fuel cell10.1016/j.jpowsour.2017.04.095 ↗
22. Multiwall carbon nanotube-based microporous layers for polymer electrolyte membrane fuel cells10.1149/2.0861712jes ↗
23. Redmond · 2018
24. Water permeation through nafion membranes
25. Influence of temperature and humidity on the mechanical properties of Nafion 117® polymer electrolyte membrane10.1002/polb.20367 ↗
26. Simulation of ionomer membrane fatigue under mechanical and hygrothermal loading conditions10.1016/j.jpowsour.2014.12.133 ↗
27. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
28. In situ confocal-Raman measurement of water and methanol concentration profiles in Nafion®membrane under cross-transport conditions10.1016/j.jpowsour.2007.10.044 ↗
29. 3 in situ and operando determination of the water content distribution in proton conducting membranes for fuel cells: a critical review10.1039/c2ee21834h ↗
30. Experimental determination of water transport in polymer electrolyte membrane fuel cells10.1149/1.3456621 ↗
31. Water transport and Schröder’s Paradox in fuel cell membrane electrode assemblies10.1016/j.jpowsour.2012.10.006 ↗
32. Modeling and experimental validation of water mass balance in a PEM fuel cell stack10.1016/j.ijhydene.2015.10.095 ↗
33. Investigation of water transport through membrane in a PEM fuel cell by water balance experiments10.1016/j.jpowsour.2005.09.013 ↗
34. Experimental determination of electro-osmotic drag coefficient in nafion membrane for fuel cells10.1149/1.2203934 ↗
35. Saturation dependent effective transport properties of PEFC gas diffusion layers10.1149/2.005209jes ↗
36. Investigating evaporation in gas diffusion layers for fuel cells with X-ray computed tomography10.1021/acs.jpcc.6b10658 ↗
37. Steady-state and EIS investigations of hydrogen electrodes and membranes in polymer electrolyte fuel cells II. Experimental10.1149/1.2172561 ↗
38. Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part II. In operando synchrotron imaging for microscale liquid water transport characterization10.1016/j.jpowsour.2017.01.114 ↗
39. In-situ membrane hydration measurement of proton exchange membrane fuel cells10.1016/j.jpowsour.2014.09.089 ↗
40. Impedance response of the proton exchange membrane in polymer electrolyte fuel cells10.1149/1.2929823 ↗
41. Degradation phenomena in PEM fuel cell with dead-ended anode10.1016/j.ijhydene.2013.06.096 ↗
42. Laser perforated fuel cell diffusion media. Part I: related changes in performance and water content10.1016/j.jpowsour.2011.01.014 ↗
43. Effects of heat and water transport on the performance of polymer electrolyte membrane fuel cell under high current density operation10.1016/j.electacta.2010.08.070 ↗
44. Process modeling of the ohmic loss in proton exchange membrane fuel cells10.1016/j.electacta.2013.12.083 ↗
45. Transient liquid water distributions in polymer electrolyte membrane fuel cell gas diffusion layers observed through in-operando synchrotron X-ray radiography10.1149/2.0991702jes ↗
46. Electrical test methods for on-line fuel cell ohmic resistance measurement10.1016/j.jpowsour.2006.02.086 ↗
47. Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 110.1016/j.nima.2007.08.087 ↗
48. Accounting for low-frequency synchrotron X-ray beam position fluctuations for dynamic visualizations10.1107/S0909049512039118 ↗
49. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells10.1107/S1600577515023899 ↗
50. Review of photon interaction cross section data in the medical and biological context10.1088/0031-9155/44/1/001 ↗
51. Berger · 2010
52. Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification10.1016/j.jpowsour.2018.08.062 ↗
53. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
54. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells10.1107/S1600577515023899 ↗
55. Repetitive hot-press approach for performance enhancement of hydrogen fuel cells10.1016/j.jpowsour.2013.08.090 ↗
56. Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity10.1007/s10800-008-9758-1 ↗
57. Experimental determination of electro-osmotic drag coefficient in nafion membrane for fuel cells10.1149/1.2203934 ↗
58. PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures10.1016/j.electacta.2008.02.074 ↗
59. Effect of elevated temperature and reduced relative humidity on ORR kinetics for PEM fuel cells10.1149/1.1984351 ↗
60. The diffusion overpotential increase and appearance of overlapping arcs on the Nyquist plots in the low humidity temperature test conditions of polymer electrolyte fuel cell10.1016/j.jpowsour.2008.10.022 ↗
61. Measurements of electrode temperatures, heat and water fluxes in PEMFCs: conclusions about transfer mechanisms10.1149/2.006303jes ↗
62. Thermal effect on water transport in proton exchange membrane fuel cell10.1002/fuce.201100100 ↗
63. Diffusion of water in nafion 115 membranes10.1149/1.1393879 ↗
64. Temperature dependence of dark current in a CCD10.1117/12.463446 ↗
65. Quantitative visualization of temporal water evolution in an operating polymer electrolyte fuel cell10.1016/j.ijhydene.2010.07.173 ↗
66. Accounting for low-frequency synchrotron X-ray beam position fluctuations for dynamic visualizations10.1107/S0909049512039118 ↗