journal article·2018-08Open access

Electrochemical and interfacial behavior of all solid state batteries using Li10SnP2S12 solid electrolyte

Carolina Vinado, Shanyu Wang, Yang He, Xingcheng Xiao, Yun Li, Chongmin Wang, Jihui Yang

Abstract

Abstract Thio-Lithium Superionic Conductor (Thio-LISICON) Li10GeP2S12 equivalent Li10SnP2S12 (LSPS) is comparable in ionic conductivity yet with a lower cost as an electrolyte for all solid-state batteries (ASSBs). ASSBs with LSPS solid electrolyte (SE), lithium-indium alloy anode, and LiCoO2 (LCO) cathode were successfully fabricated and their electrochemical performance at 60 °C was examined. Atomic layer deposition of Li3NbO4 on LCO was conducted to improve the interfacial stability. The Li3NbO4 coating effectively improves the cycle stability of the ASSB. Electrochemical impedance spectroscopy tests indicate a rapid growth of charge transfer resistance upon cycling for the cell with the uncoated LCO, primarily due to the surface instability and build-up of a space charge layer. However, the ASSBs with Li3NbO4 coated LCO show a more stable interface with a negligible impedance increase upon cycling, attributable to the buffering and passivating roles of the Li3NbO4 coating. The interfacial microstructure was analyzed to elucidate at the underlying reasons for the impedance increase and the pivotal role of the Li3NbO4 coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Interfacial behaviours between lithium ion conductors and electrode materials in various battery systems10.1039/C6TA05439K ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. All-solid-state lithium secondary batteries using LiCoO2 particles with pulsed laser deposition coatings of Li2S–P2S5 solid electrolytes10.1016/j.jpowsour.2010.10.103 ↗
4. A lithium superionic conductor10.1038/nmat3066 ↗
5. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
6. Phase stability, electrochemical stability and ionic conductivity of the Li10±1MP2X12 (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors10.1039/C2EE23355J ↗
7. Li10SnP2S12: an affordable lithium superionic conductor10.1021/ja407393y ↗
8. Li10Si0.3Sn0.7P2S12 – a low-cost and low-grain-boundary-resistance lithium superionic conductor10.1016/j.jpowsour.2016.08.115 ↗
9. Woo · 2012 · vol. 159 · 1120
10. Enhancement of the high-rate capability of solid-state lithium batteries by nanoscale interfacial modification10.1002/adma.200502604 ↗
11. Positive and negative aspects of interfaces in solid-state batteries10.1021/acsenergylett.7b01105 ↗
12. Sakuda · J. Power Sources · 2009 · 189 · 52710.1016/j.jpowsour.2008.10.129 ↗
13. All-solid-state lithium secondary batteries with oxide-coated LiCoO2 electrode and Li2S–P2S5 electrolyte10.1016/j.jpowsour.2008.10.129 ↗
14. First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries10.1039/C5TA08574H ↗
15. A battery made from a single material10.1002/adma.201500180 ↗
16. Space–charge layer effect at interface between oxide cathode and sulfide electrolyte in all-solid-state lithium-ion battery10.1021/cm5016959 ↗
17. Effects of surface modification by MgO on interfacial reactions of lithium cobalt oxide thin film electrode10.1016/j.jpowsour.2004.05.029 ↗
18. A modified ZrO2-coating process to improve electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O210.1016/j.jpowsour.2008.12.037 ↗
19. A modified Al2O3 coating process to enhance the electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 and its comparison with traditional Al2O3 coating process10.1016/j.jpowsour.2010.07.021 ↗
20. Characterization of spinel LixCo2O4 -coated LiCoO2 prepared with post-thermal treatment as a cathode material for lithium ion batteries10.1021/acs.chemmater.5b00159 ↗
21. Role of surface coating on cathode materials for lithium-ion batteries10.1039/c0jm00154f ↗
22. Improving the cycling performance and thermal stability of LiNi0.6Co0.2Mn0.2O2 cathode materials by Nb-doping and surface modification10.20964/2017.06.19 ↗
23. Interfacial modification for high-power solid-state lithium batteries10.1016/j.ssi.2008.02.017 ↗
24. Electrode surface engineering by atomic layer deposition: a promising pathway toward better energy storage10.1016/j.nantod.2016.04.004 ↗
25. Solid state lithium battery with oxysulfide glass10.1016/0167-2738(96)00199-3 ↗
26. Uncovering the role of Nb modification in improving the structure stability and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode charged at higher voltage of 4.5 V10.1016/j.jpowsour.2017.11.037 ↗
27. LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries10.1016/j.elecom.2007.02.008 ↗
28. Commentary: the Materials Project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
29. Kuhn
30. A new ultrafast superionic Li-conductor: ion dynamics in Li11Si2PS12 and comparison with other tetragonal LGPS-type electrolytes10.1039/C4CP02046D ↗
31. Chemical stability enhancement of lithium conducting solid electrolyte plates using sputtered LiPON thin films10.1016/j.jpowsour.2003.08.030 ↗
32. Electrochemical characterization of Li10SnP2S12: an electrolyte or a negative electrode for solid state Li-ion batteries?10.1016/j.ssi.2016.08.016 ↗
33. Synthesis, structure, and ionic conductivity of solid solution, Li10+δM1+δP2−δS12 (M = Si, Sn)10.1039/C4FD00143E ↗
34. Investigating the first-cycle irreversibility of lithium metal oxide cathodes for Li batteries10.1007/s10853-007-2355-6 ↗
35. All-solid-state lithium secondary batteries with metal-sulfide-coated LiCoO2 prepared by thermal decomposition of dithiocarbamato complexes10.1039/c2jm32490c ↗
36. A new composite solid electrolyte PEO/Li10GeP2S12/SN for all-solid-state lithium battery10.1016/j.electacta.2016.06.025 ↗
37. Study of the failure mechanisms of LiNi0.8Mn0.1Co0.1O2 cathode material for lithium ion batteries10.1149/2.1011507jes ↗
38. Optical and electrical properties of chemical bath deposited cobalt sulphide thin films10.1590/1980-5373-mr-2016-0441 ↗
39. Optical and electrical properties of SnS semiconductor crystals grown by physical vapor deposition technique10.1016/j.physb.2010.12.068 ↗