Three-dimensional finite element study on stress generation in synchrotron X-ray tomography reconstructed nickel-manganese-cobalt based half cell
Source abstract
Abstract
Abstract In this study, the stress generation caused by phase transitions and lithium intercalation of nickel-manganese-cobalt (NMC) based half cell with realistic 3D microstructures has been studied using finite element method. The electrochemical properties and discharged curves under various C rates are studied. The potential drops significantly with the increase of C rates. During the discharge process, for particles isolated from the conductive channels, several particles with no lithium ion intercalation are observed. For particles in the electrochemical network, the lithium ion concentration increases during the discharge process. The stress generation inside NMC particles is calculated coupled with lithium diffusion and phase transitions. The results show the stresses near the concave and convex regions are the highest. The neck regions of the connected particles can break and form several isolated particles. If the isolated particles are not connected with the electrically conductive materials such as carbon and binder, the capacity loses in battery. For isolated particles in the conductive channel, cracks are more likely to form on the surface. Moreover, stresses inside the particles increase dramatically when considering phase transitions. The phase transitions introduce an abrupt volume change and generate the strain mismatch, causing the stresses increase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Heterogeneous nucleation and growth of lithium electrodeposits on negative electrodes10.1149/1.057304jes ↗
3. Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes10.1038/nmat3793 ↗
4. Electrode side reactions, capacity loss and mechanical degradation in lithium-ion batteries10.1149/2.0291510jes ↗
5. Structural and electrochemical study of the reaction of lithium with silicon nanowires10.1016/j.jpowsour.2008.12.047 ↗
6. In-operando high-speed tomography of lithium-ion batteries during thermal runaway10.1038/ncomms7924 ↗
7. Experimental analysis of thermal runaway and propagation in lithium-ion battery modules10.1149/2.0921509jes ↗
8. Simulation of diffusion-induced stress using reconstructed electrodes particle structures generated by micro/nano-CT10.1016/j.electacta.2012.04.120 ↗
9. Three-dimensional phase field based finite element study on li intercalation-induced stress in polycrystalline LiCoO210.1016/j.jpowsour.2015.08.082 ↗
10. Numerical simulation of stress evolution in lithium manganese dioxide particles due to coupled phase transition and intercalation10.1149/1.3526597 ↗
11. Theoretical analysis of stresses in a lithium ion cell10.1149/1.3261809 ↗
12. Fracture of electrodes in lithium-ion batteries caused by fast charging10.1063/1.3492617 ↗
13. Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation10.1016/j.jpowsour.2009.01.021 ↗
14. Intercalation-induced stress and heat generation within single lithium-ion battery cathode particles10.1149/1.2926617 ↗
15. Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles10.1149/1.2759840 ↗
16. Ab initio study of anisotropic mechanical properties of LiCoO2 during lithium intercalation and deintercalation process10.1063/1.4937409 ↗
17. A microstructural resolved model for the stress analysis of lithium-ion batteries10.1149/2.082405jes ↗
18. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
19. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
20. Interaction between diffusion and chemical stresses10.1016/j.msea.2005.05.117 ↗
21. Newman · 2004
22. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
23. Aging analysis of graphite/LiNi1/3Mn1/3Co1/3O2 cells using XRD, PGAA, and AC impedance10.1149/2.0721514jes ↗
24. The effect of battery design parameters on heat generation and utilization in a Li-ion cell10.1016/j.electacta.2012.07.081 ↗
25. A parametric open circuit voltage model for lithium ion batteries10.1149/2.0331512jes ↗
26. Capacity fade analysis of a lithium ion cell10.1016/j.jpowsour.2008.01.028 ↗
27. Characterization of electronic and ionic transport in Li1-xNi0.33Mn0.33Co0.33O2 (NMC333) and Li1-xNi0.50Mn0.20Co0.30O2 (NMC523) as a function of Li content10.1149/2.0131608jes ↗
28. Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries10.1016/j.eml.2016.03.002 ↗
29. Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction10.1016/j.jpowsour.2014.01.010 ↗
30. Analysis of the polarization in a Li-ion battery cell by numerical simulations10.1149/1.3486161 ↗
31. In situ monitoring of stress developments and mechanical integrity during galvanostatic cycling of LiCoO2 thin films10.1149/2.0101512eel ↗
32. A multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell10.1016/j.commatsci.2013.10.002 ↗