journal article·2006-09

Modeling non-isothermal two-phase multicomponent flow in the cathode of PEM fuel cells

M. Acosta, C. Merten, G. Eigenberger, H. Class, R. Helmig, B. Thoben, H. Müller-Steinhagen

Journal of Power Sources· Volume 159· Issue 2
Publisher page

Abstract

Abstract A two-dimensional, non-isothermal, two-phase, multicomponent model is presented for the cathode of a PEM fuel cell, which can be applied using both conventional and interdigitated gas distributors. Gas and liquid transport are described by an extended Darcy’s law using a continuum approach. The most important material properties like wettability, permeability, porosity and tortuosity are determined experimentally. For the determination of the capillary pressure–saturation data, a method based on mercury intrusion porosimetry has been applied. The relative permeability was then derived from this data. It turned out however, that a more detailed description of the partial wetting behaviour of hydrophobic electrodes is of decisive importance. The two-dimensional distribution of the reactants and products is obtained and depends strongly on the flow configuration and the operational conditions. The model results were compared to experimental data and qualitative information on the effects of various operating conditions and on material properties were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Kordesch · 1996
2. Modelling and experimental diagnostics in polymer electrolyte fuel cells10.1149/1.2221120 ↗
3. A gas distributor design for proton-exchange-membrane fuel cells10.1149/1.1836666 ↗
4. A Mathematical model of the solid-polymer–electrolyte fuel cell10.1149/1.2221251 ↗
5. An along-the-channel model for proton exchange membrane fuel cells10.1149/1.1838431 ↗
6. Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors10.1149/1.1391561 ↗
7. Modelling of performance of PEM fuel cells with conventional and interdigitated flow fields10.1023/A:1003867012551 ↗
8. Three-dimensional numerical simulation of straight channel PEM fuel cells10.1023/A:1003964201327 ↗
9. Three-dimensional model of oxygen transport in a porous diffuser of a PEM fuel cell10.1002/aic.690491205 ↗
10. Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields10.1016/j.jpowsour.2004.05.010 ↗
11. Two-dimensional model for proton exchange membrane fuel cells10.1002/aic.690441109 ↗
12. Numerical prediction of temperature distribution in PEM fuel cells10.1080/10407780050135360 ↗
13. Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields10.1002/aic.690461016 ↗
14. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
15. A two-dimensional, two-phase, multicomponent, transient model for the cathode of a proton exchange membrane fuel cell using conventional gas distributors10.1149/1.1415032 ↗
16. Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell10.1016/S0378-7753(02)00624-9 ↗
17. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell10.1016/S0378-7753(01)01057-6 ↗
18. A 3D, multiphase, multicomponent model of the cathode and anode of a PEM fuel cell10.1149/1.1621412 ↗
19. Modeling liquid water effects in the gas diffusion and catalyst layers of the cathode of a PEM fuel cell10.1149/1.1808633 ↗
20. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium10.1016/S0017-9310(03)00305-3 ↗
21. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1149/1.1646148 ↗
22. Flooding of gas diffusion backing in PEFCs: physical and electrochemical characterization10.1149/1.1763138 ↗
23. Bear · 1988
24. Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy10.1149/1.1836485 ↗
25. M. Wöhr, Instationäres, thermodynamisches Verhalten der Polymerme- mbran-Brennstoffzelle, PhD Thesis, University of Stuttgart, 1998.
26. Helmig · 1997
27. Capillary behaviour in porous solids10.2118/941152-G ↗
28. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils10.2136/sssaj1980.03615995004400050002x ↗
29. R.H. Brooks, A.T. Corey, Hydraulic Properties of Porous Media, Hydrol. Pap. 3, Colorado State University, 1964.
30. C. Wieser, Stromdichteverteilung und Leistungsverhalten der Polymerel- ektrolyt-Brennstoffzelle, PhD Thesis, University of Stuttgart, 2001.
31. R. Helmig, H. Class, H. Huber, H. Sheta, R. Ewing, R. Hinkelmann, H. Jakobs, P. Bastian, Architecture of the modular program system MUFTE_UG for simulating multiphase flow and transport processes in heterogeneous porous media, Math. Geol. 2 (1998).
32. UG: a flexible software toolbox for solving partial differential equations
33. Efficient fully-coupled solution techniques for two phase flow in porous media. parallel multigrid solution and large scale computations10.1016/S0309-1708(99)00014-7 ↗
34. Numerical simulation of non-isothermal multiphase multicomponent processes in porous media. 1. An efficient solution technique10.1016/S0309-1708(02)00014-3 ↗
35. P. Bastian, Numerical computation of multiphase flows in porous media, Habilitation Thesis, Technische Fakultät, Christian–Albrechts–Universität Kiel, 1999.
36. H. Lechner, Die Kontaktwinkelmessung: Ein Verfahren zur Bestimmung der freien Grenzflächenenergie von Festkörpern, Krüss GmbH Süd, Wissenschaftliche Laborgeräte, Stephanskirchen, Germany, 1988.
37. The effect of drop (bubble) size on advancing and receding contact angles for heterogeneous and rough solid surfaces as observed with sessile-drop and captive-bubble techniques10.1006/jcis.1996.0186 ↗
38. Capillary pressures—their measurement using Mercury and the calculation of permeability therefrom
39. Die Oberflächendiffusion von Kohlendioxid in aktiven Kohlen10.1007/BF01502640 ↗
40. Schubert · 1982
41. H. Sheta, Simulation von Mehrphasenvorgängen in porösen Medien unter Einbeziehung von Hysterese-Effekten, PhD Thesis, University of Stuttgart, 1999.
42. N.T. Burdine, Relative permeability calculations from pore-size distribution data, Tech. Rep., Petrol. Trans. AIME (1953).10.2118/225-G ↗
43. Pressure dependence of the oxygen reduction reaction at the platinum microelectrode–Nafion interface: electrode kinetics and mass transport10.1149/1.2068992 ↗
44. F. Meier, Stofftransport in Polymerelektrolyt-Membranen für Brennsto- ffzellen—Experimentelle Untersuchung, Modellierung und Simulation, PhD Thesis, University of Stuttgart, 2004.
45. W. Neubrand, Modellbildung und Simulation von Elektromembranverfahren, PhD Thesis, University of Stuttgart, 1999.
46. Diagnostic tool to detect electrode flooding in proton-exchange-membrane fuel cells10.1002/aic.690491221 ↗
47. Influence of different gas diffusion layers on the water management of the PEFC cathode
48. M. Acosta, Untersuchung von Elektrode–Membran–Elektrode (EME)-Einheiten und Gasverteilerstrukturen für PEM-Brennstoffzellen, Master’s Thesis, Universität Stuttgart. Institut für Chemische Verfahrenstechnik, 2000.
49. Degradation of the hydrophobicity of fuel cell electrodes