Review on mechanisms and continuum models of multi-phase transport phenomena in porous structures of non-aqueous Li-Air batteries
Source abstract
Abstract
During recent years intensive research activities involving both experimental and modeling approaches have appeared for different aspects of Lithium-air (Li-air) battery. Multi-phase transport phenomena including dissolved oxygen and lithium ions (Lit) in the liquid electrolyte, as well as electrons in the solid materials, are strongly coupled with the porous structures and various reactions, particularly the solid product grown in the porous cathode during battery discharge. Understanding the mechanisms of transport phenomena and accurate evaluation of effective transport properties are significant for improving the battery capacities and design, especially at high rate conditions. In this paper, the transport governing equations commonly used for macroscopic continuum models at porous-average level are outlined and highlighted, with a purpose to provide a general overview of the validity and the limitation of these approaches. The most often used models in the open literature are reviewed and discussed focusing on the effective properties involving tortuosity factors, solid product morphologies, as well as effects on the void space clogging, surface area reduction and passivation. Comments and suggestions are also provided for better understanding of multi-phase transport phenomena and implementation of the detailed models for solid product generation and morphology growth in Li-air battery cathodes. (C) 2014 Elsevier B.V. All rights reserved. (Less)
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Aprotic and aqueous Li–O2 batteries10.1021/cr400573b ↗
2. Lithium-air battery: promise and challenges10.1021/jz1005384 ↗
3. Recent research progress on non-aqueous lithium-air batteries from Argonne National Laboratory10.3390/en6116016 ↗
4. Challenges and opportunities of nanostructured materials for aprotic rechargeable lithium–air batteries10.1016/j.nanoen.2012.11.014 ↗
5. Lithium air battery: alternate energy resource for the future10.33961/JECST.2012.3.1.14 ↗
6. Practical challenges associated with catalyst development for the commercialization of Li-air batteries10.33961/JECST.2014.5.1.1 ↗
7. Lithium oxides precipitation in nonaqueous Li–air batteries10.1039/c2cp42768k ↗
8. A critical review on lithium–air battery electrolytes10.1039/c3cp54165g ↗
9. Graphene for advanced Li/S and Li/air batteries10.1039/C3TA12522J ↗
10. A critical review of Li/air batteries10.1149/2.086202jes ↗
11. Nanostructured electrodes for lithium-ion and lithium-air batteries: the latest developments, challenges, and perspectives10.1016/j.mser.2011.06.001 ↗
12. The impact of nano-scaled materials on advanced metal–air battery systems10.1016/j.nanoen.2012.11.016 ↗
13. Critical aspects in the development of lithium–air batteries10.1007/s10008-013-1999-1 ↗
14. Lithium–oxygen batteries: bridging mechanistic understanding and battery performance10.1039/c3ee23966g ↗
15. Precipitation in aqueous lithium–oxygen batteries: a model-based analysis10.1039/c3ee24299d ↗
16. Modeling of Li-air batteries with dual electrolyte10.1149/2.010206jes ↗
17. Lithium-air battery: promise and challenges10.1021/jz1005384 ↗
18. Optimization of the cathode structure of lithium-air batteries based on a two-dimensional, transient, non-isothermal model10.1149/2.043210jes ↗
19. Buoyancy effects on developing laminar gas flow and heat transfer in a rectangular fuel cell duct10.1080/10407780152121155 ↗
20. On continuum models for heat transfer in micro/nano-scale porous structures relevant to fuel cells10.1016/j.ijheatmasstransfer.2012.11.075 ↗
21. On mechanisms and models of multi-component gas diffusion in porous structures of fuel cell electrodes10.1016/j.ijheatmasstransfer.2013.10.032 ↗
22. Modeling discharge deposit formation and its effect on lithium-air battery performance10.1016/j.electacta.2012.04.137 ↗
23. Identifying capacity limitations in the Li/oxygen battery using experiments and modeling10.1149/1.3527055 ↗
24. Toward a lithium−“air” battery: The effect of CO2 on the chemistry of a lithium–oxygen Cell10.1021/ja4016765 ↗
25. Partially fluorinated solvent as a Co-solvent for the non-aqueous electrolyte of Li/air battery10.1016/j.jpowsour.2010.11.021 ↗
26. Twin problems of interfacial carbonate formation in nonaqueous Li−O2 batteries10.1021/jz300243r ↗
27. Elucidating the mechanism of oxygen reduction for lithium-air battery applications10.1021/jp908090s ↗
28. Nanostructured carbon-based cathode catalysts for nonaqueous lithium–oxygen batteries10.1039/C4CP00225C ↗
29. An improved high-performance lithium-air battery10.1038/nchem.1376 ↗
30. A reversible and higher-rate Li-O2 battery10.1126/science.1223985 ↗
31. Rate-dependent morphology of Li2O2 growth in Li-O2 batteries10.1021/jz401973c ↗
32. On the mechanism of nonaqueous Li–O2 electrochemistry on C and its kinetic overpotentials: some implications for Li−air batteries10.1021/jp306680f ↗
33. Superior rechargeability and efficiency of lithium–oxygen batteries: hierarchical air electrode architecture combined with a soluble catalyst10.1002/ange.201400711 ↗
34. Oxygen reduction reaction catalyst on lithium/air battery discharge performance10.1039/c0jm04170j ↗
35. Influence of carbon pore size on the discharge capacity of Li–O2 batteries10.1039/C4TA01745E ↗
36. Selection of oxygen reduction catalysts for rechargeable lithium–air batteries – metal or oxide?10.1016/j.apcatb.2011.08.021 ↗
37. Non-aqueous and hybrid Li-O2 batteries10.1002/aenm.201200001 ↗
38. Hierarchical meso/macro structure porous carbon black as electrode materials in Li-air battery10.1016/j.jpowsour.2014.03.072 ↗
39. Chapter 15 lithium–air batteries
40. Chapter 17 Possibility and prospect for future energy storages
41. Porous graphene nanoarchitectures: An efficient catalyst for low charge-overpotential, long life, and high capacity lithium−oxygen batteries10.1021/nl500397y ↗
42. The influence of catalyst on discharge and charge voltages of rechargeable Li-oxygen batteries10.1149/1.3363047 ↗
43. Carbon-Based Electrodes for Lithium Air Batteries: Scientific and Technological Challenges from a Modeling Perspective10.1149/2.012310jss ↗
44. Computational modeling of transport limitations in Li-air batteries10.1149/04529.0123ecst ↗
45. A multiscale physical model of electrochemical energy storage devices10.1149/04527.0011ecst ↗
46. Oxygen transport properties of organic electrolytes and performance of lithium/oxygen battery10.1149/1.1606454 ↗
47. Diffusion-limited model for a lithium/air battery with an organic electrolyte10.1016/j.jpowsour.2006.09.099 ↗
48. Platinum–gold nanoparticles: A highly active bifunctional electrocatalyst for rechargeable lithium-air batteries10.1021/ja1036572 ↗
49. Prediction of the theoretical capacity of non-aqueous lithium-air batteries10.1016/j.apenergy.2013.04.031 ↗
50. Some possible approaches for improving the energy density of Li-air batteries10.1149/1.3486114 ↗
51. Modelling the micro-macro homogeneous cycling behaviour of a lithium-air battery10.1016/j.jpowsour.2012.11.053 ↗
52. Modeling of volume change phenomena in a Li-air battery10.1016/j.jpowsour.2014.02.044 ↗
53. Modeling discharge deposit formation and its effect on lithium-air battery performance10.1016/j.electacta.2012.04.137 ↗
54. Air electrode design for sustained high power operation of Li/air batteries10.1016/j.jpowsour.2009.06.005 ↗
55. All-carbon-nanofiber electrodes for high-energy rechargeable Li-O2 Batteries10.1039/c1ee01496j ↗
56. The electrochemical performance of phenol-formaldehyde based activated carbon electrodes for lithium/oxygen batteries10.1149/2.089203jes ↗
57. Hierarchically porous graphene as a lithium-air battery electrode10.1021/nl203332e ↗
58. Fabrication process simulation of a PEM fuel cell catalyst layer and its microscopic structure characteristics10.1149/2.064203jes ↗
59. Process based large scale molecular dynamic simulation of a fuel cell catalyst layer10.1149/2.028203jes ↗
60. Preparation of mesocellular carbon foam and its application for lithium/oxygen battery10.1016/j.elecom.2009.03.029 ↗
61. A CoOx/carbon double-layer thin film Air electrode for nonaqueous Li-air batteries10.1016/j.jpowsour.2012.09.052 ↗
62. Electrochemical performances of lithium-air cell with carbon materials10.5012/bkcs.2010.31.11.3221 ↗
63. The discharge rate capability of rechargeable Li-O2 batteries10.1039/c1ee01500a ↗
64. Investigation of the solution condition of lithium electrolyte solutions with LiCF3SO3 salt10.1023/A:1004717517628 ↗
65. Ion and solvent diffusion and ion conduction of PC-DEC and PC-DME binary solvent electrolytes of LiN(SO2CF3)210.1016/j.electacta.2004.03.007 ↗
66. On tortuosity and the tortuosity factor in flow and diffusion through porous media10.1016/0009-2509(89)85053-5 ↗
67. A customized framework for 3-D morphological characterization of microporous layers10.1016/j.electacta.2013.04.103 ↗
68. 3D microstructural characterization of a solid oxide fuel cell anode reconstructed by focused Ion beam tomography10.1016/j.jpowsour.2011.03.060 ↗
69. Analysis of air cathode performance for lithium-air batteries10.1149/2.092310jes ↗
70. Influence of Li2O2 morphology on oxygen reduction and evolution kinetics in Li-O2 batteries10.1039/c3ee40998h ↗
71. Characterization of the lithium/oxygen organic electrolyte battery10.1149/1.1498256 ↗
72. Rechargeable batteries: challenges old and new10.1007/s10008-012-1751-2 ↗
73. Realization of an artificial three-phase reaction zone in a Li–air battery10.1002/celc.201300055 ↗
74. Limitations and potential Li-air batteries: a simulation prediction
75. Impact of the cathode microstructure on the discharge performance of lithium air batteries: A multiscale model10.1149/2.002408jes ↗
76. Multi-dimensional modeling of lithium-air batteries
77. Electrical conductivity in Li2O2 and its role in determining capacity limitations in nonaqueous Li-O2 batteries
78. Review on Li–air batteries – opportunities, limitations and perspective10.1016/j.jpowsour.2010.09.031 ↗
79. Mechanisms of morphological evolution of Li2O2 particles during electrochemical growth10.1021/jz4003586 ↗
80. In situ fabrication of porous-carbon-supported α-MnO2 nanorods at room temperature: application for rechargeable Li-O2 batteries10.1039/c2ee23621d ↗
81. Optimization of air electrode for Li/air batteries10.1149/1.3314375 ↗
82. Discharge characteristic of a non-aqueous electrolyte Li/O2 battery10.1016/j.jpowsour.2009.08.088 ↗
83. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes10.1021/ja2021747 ↗
84. Microfocused X-ray study on precipitate formation in the separator region of nonaqueous Li-O2 batteries10.1002/cssc.201200555 ↗
85. Chapter 14: nano aspects of metal–air batteries