Advanced impedance model for double-layered solid oxide fuel cell cermet anodes
Source abstract
Abstract
Abstract In state-of-the-art, anode-supported, solid oxide fuel cells (SOFC) the fuel electrode is made of two different porous Ni/stabilized zirconia layers, both with specified phase compositions and microstructural characteristics. It is generally assumed that electro-oxidation of fuel takes place in the thinner anode functional layer (AFL) adjacent to the electrolyte, while gas diffusion takes place in the thicker anode substrate (AS). This assumption is not always applicable and established models fail. This paper introduces a generally valid equivalent circuit model by means of a three-channel transmission line model (3CTLM) that considers electro-oxidation, ionic conduction and gas diffusion. It is parameterized by (i) impedance measurements on model-electrodes, (ii) conductivity measurements, (iii) FIB/SEM-tomography and (iv) gas theory. The complex impedance curve is derived by a newly developed numerical routine that uses calculation steps from network analysis. A model validation is performed by comparing measured and simulated impedance spectra of anode-supported SOFCs varying in AFL thickness from 3 to 22 μm. The 3CTLM is capable of predicting the impedance of any Ni/stabilized zirconia anode design. A model-based optimization is demonstrated, selecting different ionic conducting phases in AFL and AS for combinations of Ni/10Sc1CeSZ, Ni/8YSZ and Ni/3YSZ, across a temperature range of 600–900 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Solid oxide fuel cell technology - features and applications10.1016/j.ssi.2004.07.042 ↗
2. Durability test and degradation behavior of a 2.5 kW SOFC stack with internal reforming of LNG10.1016/j.ijhydene.2013.09.140 ↗
3. Electrochemical characterization and degradation analysis of large SOFC stacks by impedance spectroscopy10.1002/fuce.201200175 ↗
4. Quantification of double-layer Ni/YSZ fuel cell anodes from focused ion beam tomography data10.1016/j.jpowsour.2013.08.021 ↗
5. SOC development at Forschungszentrum Jülich10.1149/07801.1791ecst ↗
6. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
7. Electrochemical analysis of reformate-fuelled anode supported SOFC10.1149/1.3597177 ↗
8. Stromverteilung in porösen elektroden10.1016/0013-4686(60)80025-4 ↗
9. Winsel · 2010
10. On porous electrodes10.1016/0013-4686(64)85015-5 ↗
11. Investigations into the kinetics of the Ni-YSZ-cermet-anode of a solid oxide fuel cell
12. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
13. Pinning-down polarization losses and electrode kinetics in cermet-supported LSM solid oxide cells in reversible operation10.1016/j.ssi.2015.04.009 ↗
14. Deconvolution of four transmission-line-model impedances in Ni-YSZ/YSZ/LSM solid oxide cells and mechanistic insights10.1016/j.electacta.2015.11.118 ↗
15. Detailed impedance characterization of a well performing and durable Ni:CGO infiltrated cermet anode for metal-supported solid oxide fuel cells10.1016/j.jpowsour.2012.07.031 ↗
16. Electrochemical impedance modeling of a solid oxide fuel cell anode10.1002/fuce.201300292 ↗
17. Advanced impedance modelling of Ni/8YSZ cermet anodes10.1016/j.electacta.2017.12.029 ↗
18. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
19. Studying the CO–CO2 characteristics of SOFC anodes by means of patterned Ni anodes10.1016/j.jpowsour.2010.10.056 ↗
20. Degradation and relaxation effects of Ni patterned anodes in H2–H2O atmosphere10.1149/1.3383041 ↗
21. Utz · 2011
22. Electrochemical analysis of sulfur-poisoning in anode supported SOFCs fuelled with a model reformate10.1149/2.015206jes ↗
23. The thermal conductivity of nickel10.1016/0017-9310(65)90017-7 ↗
24. On porous electrodes in electrolyte solutions10.1016/0013-4686(63)80042-0 ↗
25. Macdonald · 2005
26. SOFC modeling and parameter identification by means of impedance spectroscopy10.1149/1.3247567 ↗
27. Theory of the impedance of electron diffusion and recombinantion in a thin layer10.1021/jp011941g ↗
28. Atkins · 1999
29. A model-based interpretation of the influence of anode surface chemistry on solid oxide fuel cell electrochemical impedance spectra10.1149/2.046207jes ↗
30. Electrochemical impedance modeling of gas transport and reforming kinetics in reformate fueled solid oxide fuel cell anodes10.1016/j.electacta.2013.05.136 ↗
31. Impurity features in Ni-YSZ-H2-H2O electrodes10.1016/j.ssi.2010.12.014 ↗
32. Phase transformation related electrical conductivity degradation of NiO doped YSZ10.1016/j.ssi.2012.05.023 ↗
33. Accelerated degradation of 8.5 mol% Y2O3-doped zirconia by dissolved Ni10.1016/j.ssi.2012.02.023 ↗
34. Degradation in ionic conductivity of Ni/YSZ anode cermets
35. Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling10.1016/j.jpowsour.2010.10.006 ↗
36. Joos · 2017
37. Application of a distributed impedance model in the analysis of conducting polymer films10.1016/S1388-2481(00)00089-8 ↗
38. Three-channel transmission line impedance model for mesoscopic oxide electrodes functionalized with a conductive coating10.1021/jp0611727 ↗
39. Resnick · 1966
40. The equivalence of triangles and three-pointed stars in conducting networks
41. Circular planar graphs and resistor networks10.1016/S0024-3795(98)10087-3 ↗
42. Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports10.1007/s10800-008-9682-4 ↗
43. Micro-tubular solid oxide fuel cells fabricated by phase-inversion method, Electrochem
44. Optimization of the strength of SOFC anode supports10.1016/j.jeurceramsoc.2011.11.015 ↗
45. Mechanical behaviour of ceramic oxygen ion-conducting membranes10.1016/S0167-2738(00)00714-1 ↗
46. Influence of porosity on mechanical properties of tetragonal stabilized zirconia10.1016/j.jeurceramsoc.2017.09.029 ↗
47. Development of a novel ceramic support layer for planar solid oxide cells10.1002/fuce.201300121 ↗
48. Anode microstructural change upon long-term operation for the cathode-supported tubular-type SOFC10.1016/j.ssi.2012.03.035 ↗
49. Feasibility of liquid fuels for SOFC with Ni-base anode10.4028/www.scientific.net/AST.72.230 ↗
50. Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs10.1016/j.ijhydene.2011.01.151 ↗
51. Reforming activity and carbon deposition on cermet catalysts for fuel electrodes of solid oxide fuel cells10.1016/j.cattod.2009.01.033 ↗
52. Electrode performance test on single ceramic fuel cells using as electrolyte Sr- and Mg-doped LaGaO[sub 3]10.1149/1.1838058 ↗
53. Development of new fast oxide ion conductor and application for intermediate temperature solid oxide fuel cells10.1246/bcsj.79.1155 ↗
54. Electrode kinetics of porous mixed-conducting oxygen electrodes10.1149/1.1837252 ↗
55. Luhleich · 1997
56. Fuel cell technology and applications Part 2
57. Trends in processing SOFC components
58. Practical guidelines for reliable electrochemical characterization of solid oxide fuel cells10.1016/j.electacta.2016.12.148 ↗
59. A method for improving the robustness of linear kramers-kronig validity tests10.1016/j.electacta.2014.01.034 ↗
60. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
61. Time-dependent electrode performance changes in intermediate temperature solid oxide fuel cells10.1149/1.3270047 ↗