journal article·2018-04

Efficient conversion of sand to nano-silicon and its energetic Si-C composite anode design for high volumetric capacity lithium-ion battery

Mohammad Furquan, Anish Raj Khatribail, Savithri Vijayalakshmi, Sagar Mitra

Publisher page

Abstract

Abstract Silicon is an attractive anode material for Li-ion cells, which can provide energy density 30% higher than any of the today's commercial Li-ion cells. In the current study, environmentally benign, high abundant, and low cost sand (SiO2) source has been used to prepare nano-silicon via scalable metallothermic reduction method using micro wave heating. In this research, we have developed and optimized a method to synthesis high purity nano silicon powder that takes only 5 min microwave heating of sand and magnesium mixture at 800 °C. Carbon coated nano-silicon electrode material is prepared by a unique method of coating, polymerization and finally in-situ carbonization of furfuryl alcohol on to the high purity nano-silicon. The electrochemical performance of a half cell using the carbon coated high purity Si is showed a stable capacity of 1500 mAh g−1 at 6 A g−1 for over 200 cycles. A full cell is fabricated using lithium cobalt oxide having thickness ≈56 μm as cathode and carbon coated silicon thin anode of thickness ≈9 μm. The fabricated full cell of compact size exhibits excellent volumetric capacity retention of 1649 mAh cm−3 at 0.5 C rate (C = 4200 mAh g−1) and extended cycle life (600 cycles). The full cell is demonstrated on an LED lantern and LED display board.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Nano Energy Silicon based lithium-ion battery anodes: a chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
2. Size-dependent fracture of silicon nanoparticles during lithiation10.1021/nn204476h ↗
3. Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries10.1038/ncomms11886 ↗
4. Conductive rigid skeleton supported silicon as high-performance Li-Ion battery anodes10.1021/nl301657y ↗
5. Bulk-nanoporous-silicon negative electrode with extremely high cyclability for lithium-ion batteries prepared using a top-down process10.1021/nl501500g ↗
6. Mesoporous amorphous silicon: a simple synthesis of a high-rate and long-life anode material for lithium-ion batteries10.1002/anie.201608146 ↗
7. High damage tolerance of electrochemically lithiated silicon10.1038/ncomms9417 ↗
8. Porous doped silicon nanowires for lithium ion battery anode with long cycle life10.1021/nl300206e ↗
9. Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase control10.1038/nnano.2012.35 ↗
10. A yolk-shell design for stabilized and scalable Li-ion battery alloy anodes10.1021/nl3014814 ↗
11. Amorphous silicon anode for lithium-ion rechargeable batteries10.1016/S0378-7753(02)00707-3 ↗
12. Silicon nanotube anode for lithium-ion batteries10.1016/j.elecom.2013.01.015 ↗
13. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
14. Structural and electrochemical study of the reaction of lithium with silicon nanowires10.1016/j.jpowsour.2008.12.047 ↗
15. High-energy-density lithium-ion battery using a carbon-nanotube–Si composite anode and a compositionally graded Li[Ni 0.85 Co 0.05 Mn 0.10 ]O 2 cathode10.1039/C6EE01134A ↗
16. Controllable synthesis of hollow Si anode for long-cycle-life lithium-ion batteries10.1002/adma.201400578 ↗
17. The design of a Li-ion full cell battery using a nano silicon and nano multi-layer graphene composite anode10.1016/j.jpowsour.2013.10.087 ↗
18. Core double-shell Si@SiO2@C nanocomposites as anode materials for Li-ion batteries10.1039/b925696b ↗
19. High volumetric capacity silicon-based lithium battery anodes by nanoscale system engineering10.1021/nl403231v ↗
20. Interdispersed silicon-carbon nanocomposites and their application as anode materials for lithium-ion batteries10.1016/j.elecom.2012.11.032 ↗
21. Well-constructed silicon-based materials as high-performance lithium-ion battery anodes10.1039/C5NR06278K ↗
22. Silicon oxycarbide glass-graphene composite paper electrode for long-cycle lithium-ion batteries10.1038/ncomms10998 ↗
23. Inward lithium-ion breathing of hierarchically porous silicon anodes10.1038/ncomms9844 ↗
24. High-performance lithium-ion anodes using a hierarchical bottom-up approach10.1038/nmat2725 ↗
25. Silicon nanotube battery anodes10.1021/nl902058c ↗
26. Three-dimensionally engineered porous silicon electrodes for Li Ion batteries10.1021/nl302114j ↗
27. Quartz (SiO2): a new energy storage anode material for Li-ion batteries10.1039/c2ee00003b ↗
28. Mesoporous SiO 2/carbon hollow spheres applied towards a high rate-performance Li-battery anode10.1039/C6QI00125D ↗
29. SiO2@C hollow sphere anodes for lithium-ion batteries10.1016/j.jmst.2016.07.021 ↗
30. Carbon-coated SiO2 nanoparticles as anode material for lithium ion batteries10.1016/j.jpowsour.2011.08.009 ↗
31. Scalable synthesis of nano-silicon from beach sand for long cycle life Li-ion batteries10.1038/srep05623 ↗
32. Scalable synthesis of silicon nanosheets from sand as an anode for Li-ion batteries10.1039/c3nr05354g ↗
33. A magnesiothermic reaction process for the scalable production of mesoporous silicon for rechargeable lithium batteries10.1039/c3cc43134g ↗
34. Synthesis of ultrathin Si nanosheets from natural clays for lithium-ion battery anodes10.1021/acsnano.5b07977 ↗
35. Theoretical limits of energy density in silicon-carbon composite anode based lithium ion batteries
36. Thick electrodes for high energy lithium ion batteries
37. M. Singh, J. Kaiser, H. Hahn, Effect of porosity on the thick electrodes for high energy density lithium ion batteries for, (n.d.). doi:10.3390/batteries2040035.10.3390/batteries2040035 ↗
38. Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.9%10.1039/C6EE02685K ↗
39. A major constituent of Brown algae for use in high-capacity Li-Ion batteries10.1126/science.1209150 ↗
40. Small things make a big difference: binder effects on the performance of Li and Na batteries10.1039/C4CP02475C ↗
41. Multiple hydrogel alginate binders for Si anodes of lithium-ion battery10.1016/j.electacta.2017.05.094 ↗
42. PVDF latex as a binder for positive electrodes in lithium-ion batteries10.1021/ie403239s ↗
43. The role of separators in lithium-ion cell safety10.1149/2.F07122if ↗
44. Li-ion battery separators, mechanical integrity and failure mechanisms leading to soft and hard internal shorts
45. A comparative study on polypropylene separators coated with different inorganic materials for lithium-ion batteries10.1007/s11705-017-1648-9 ↗
46. M. Furquan, S. Vijayalakshmi, S. Mitra, U.S. Patent US15/171,226, 2016.
47. Thermodynamic probability of realization of the process of silicon dioxide reduction by magnesium at high temperatures
48. R factors in Rietveld analysis: how good is good enough?10.1154/1.2179804 ↗
49. Acid-catalyzed polycondensation of furfuryl alcohol: mechanisms of chromophore formation and cross-linking10.1021/ma951522f ↗
50. Characterizing carbon materials with Raman spectroscopy
51. Nanocrystalline graphite growth on sapphire by carbon molecular beam epitaxy10.1021/jp110650d ↗
52. Morphology, structure and chemistry of extracted diesel soot—Part I: transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and synchrotron X-ray diffraction study10.1016/j.triboint.2012.03.004 ↗
53. Graphitic carbon growth on crystalline and amorphous oxide substrates using molecular beam epitaxy10.1186/1556-276X-6-565 ↗
54. Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes10.1021/nn505410q ↗
55. Consumption of fluoroethylene carbonate (FEC) on Si-C composite electrodes for Li-Ion batteries10.1149/2.0951608jes ↗
56. Failure modes of silicon powder negative electrode in lithium secondary batteries10.1149/1.1792242 ↗
57. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
58. Size-dependent cyclic voltammetry study of silicon microwire anodes for lithium ion batteries10.1016/j.electacta.2016.09.088 ↗
59. Structured silicon anodes for lithium battery applications10.1149/1.1563094 ↗
60. Asymmetric rate behavior of Si anodes for lithium-ion batteries: ultrafast de-lithiation versus sluggish lithiation at high current densities
61. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
62. On the origin of the extra electrochemical capacity displayed by MO/Li cells at low potential10.1149/1.1467947 ↗
63. To Be or not to Be pseudocapacitive?10.1149/2.0201505jes ↗
64. Characterising lithium-ion battery degradation through the identification and tracking of electrochemical battery model parameters10.3390/batteries2020013 ↗
65. Monodisperse porous silicon spheres as anode materials for lithium ion batteries
66. Investigation on silicon alloying kinetics during lithiation by galvanostatic impedance spectroscopy10.1016/j.jpowsour.2016.03.008 ↗
67. Fluoroethylene carbonate electrolyte and its use in lithium ion batteries with graphite anodes10.1016/S0378-7753(98)00201-8 ↗