journal article·2017-08

Investigation of GDL compression effects on the performance of a PEM fuel cell cathode by lattice Boltzmann method

G.R. Molaeimanesh, M. Nazemian

Publisher page

Abstract

Abstract Proton exchange membrane (PEM) fuel cells with a great potential for application in vehicle propulsion systems will have a promising future. However, to overcome the exiting challenges against their wider commercialization further fundamental research is inevitable. The effects of gas diffusion layer (GDL) compression on the performance of a PEM fuel cell is not well-recognized; especially, via pore-scale simulation technique capturing the fibrous microstructure of the GDL. In the current investigation, a stochastic microstructure reconstruction method is proposed which can capture GDL microstructure changes by compression. Afterwards, lattice Boltzmann pore-scale simulation technique is adopted to simulate the reactive gas flow through 10 different cathode electrodes with dissimilar carbon paper GDLs produced from five different compression levels and two different carbon fiber diameters. The distributions of oxygen mole fraction, water vapor mole fraction and current density for the simulated cases are presented and analyzed. The results of simulations demonstrate that when the fiber diameter is 9 μm adding compression leads to lower average current density while when the fiber diameter is 7 μm the compression effect is not monotonic.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Lattice Boltzmann Simulation Studies · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Larminie · 2003
2. A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation10.1016/j.ijhydene.2016.08.179 ↗
3. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
4. Analysis of multi phase transport phenomena with catalyst reactions in polymer electrolyte membrane fuel cells–a review10.1016/j.jpowsour.2011.04.040 ↗
5. Nanotomography based study of gas diffusion layers10.1016/j.mee.2009.10.027 ↗
6. Lattice Boltzmann simulation of proton exchange membrane fuel cells–A review on opportunities and challenges10.1016/j.ijhydene.2016.09.211 ↗
7. Compress effects on porosity, gas-phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer10.1002/er.3348 ↗
8. Effect of particle size distribution and packing compression on fluid permeability as predicted by lattice-Boltzmann simulations10.1016/j.compchemeng.2008.09.003 ↗
9. A numerical investigation of the effects of compression force on PEM fuel cell performance10.1016/j.jpowsour.2008.04.060 ↗
10. A numerical study of flow crossover between adjacent flow channels in a proton exchange membrane fuel cell with serpentine flow field10.1016/j.jpowsour.2008.09.008 ↗
11. Effect of gas diffusion layer compression on the performance in a proton exchange membrane fuel cell10.1016/j.fuel.2008.03.001 ↗
12. The influence of stack clamping pressure on the performance of PEM fuel cell stack10.1016/j.cap.2009.11.042 ↗
13. Effect of compression on the performance of a HT-PEM fuel cell10.1007/s10800-013-0597-3 ↗
14. Deformation of PEM fuel cell gas diffusion layers under compressive loading: an analytical approach10.1016/j.jpowsour.2014.04.057 ↗
15. Effect of inhomogeneous compression of gas diffusion layer on the performance of PEMFC with interdigitated flow field10.1016/j.enconman.2015.12.012 ↗
16. Modeling of inhomogeneous compression effects of porous GDL on transport phenomena and performance in PEM fuel cells10.1002/er.3687 ↗
17. Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach10.1149/1.2472547 ↗
18. Design of acoustic trim based on geometric modeling and flow simulation for non-woven10.1016/j.commatsci.2006.01.018 ↗
19. Formulas for stationary planar fibre processes II-partially oriented-fibre systems
20. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
21. A review of cell-scale multiphase flow modeling, including water management, in polymer electrolyte fuel cells10.1016/j.apenergy.2016.08.010 ↗
22. Annu. Rev, Lattice Boltzmann method for fluid flows10.1146/annurev.fluid.30.1.329 ↗
23. Mohamad · 2011
24. Succi · 2001
25. Recent trends and developments in polymer electrolyte membrane fuel cell modelling10.1016/j.electacta.2010.10.046 ↗
26. Sukop · 2007
27. Multi-scale simulation of single-phase multi-component transport in the cathode gas diffusion layer of a polymer electrolyte fuel celltalized10.1149/1.3496618 ↗
28. Lattice Boltzmann simulation of transport phenomena in nanostructured cathode catalyst layer for proton exchange membrane fuel cells10.1557/opl.2012.322 ↗
29. Pore-scale flow and mass transport in gas diffusion layer of proton exchange fuel cell with interdigitated flow fields10.1016/j.ijthermalsci.2011.08.003 ↗
30. Coupling between finite volume method and lattice Boltzmann method and its application to fluid flow and mass transport in proton exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2012.02.020 ↗
31. Multiscale modeling of proton exchange membrane fuel cell by coupling finite volume method and lattice Boltzmann method10.1016/j.ijheatmasstransfer.2013.03.048 ↗
32. A three-dimensional pore-scale model of the cathode electrode in polymer-electrolyte membrane fuel cell by lattice Boltzmann method10.1016/j.jpowsour.2014.02.027 ↗
33. A multi-component two-phase lattice Boltzmann method applied to a 1-D Fischer–Tropsch reactor10.1016/j.cej.2012.07.019 ↗
34. A pore-scale model for the cathode electrode of a proton exchange membrane fuel cell by lattice Boltzmann method10.1007/s11814-014-0229-6 ↗
35. Agglomerate modeling of cathode catalyst layer of a PEM fuel cell by the lattice Boltzmann method10.1016/j.ijhydene.2015.02.097 ↗
36. Lattice Boltzmann pore-scale investigation of coupled physicalelectrochemical processes in C/Pt and non-precious metal cathode catalyst layers in proton exchange membrane fuel cells10.1016/j.electacta.2015.01.121 ↗
37. The effect of pulsating pressure on the performance of a PEM fuel cell with a wavy cathode surface10.1016/j.ijhydene.2016.05.291 ↗
38. Investigation of a waveform cathode channel on the performance of a PEM fuel cell by means of a pore-scale multi-component lattice Boltzmann method10.1016/j.jtice.2016.06.001 ↗
39. A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems10.1103/PhysRev.94.511 ↗
40. Electrical conductivity of PEMFC under loading10.1016/j.jpowsour.2015.04.145 ↗
41. On pressure and velocity boundary conditions for the lattice Boltzmann BGK model10.1063/1.869307 ↗
42. Incropera · 2007
43. Mench · 2008
44. Li · 2006
45. Temperature dependence of the electrode kinetics of oxygen reduction at the platinum/Nafion® interface—a microelectrode investigation, A.J. Appleby, C.R. Martin10.1149/1.2221258 ↗
46. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell10.1016/S0378-7753(01)01057-6 ↗