journal article·2006-09

Evaluation of fuel cell system efficiency and degradation at development and during commercialization

R.S. Gemmen, C.D. Johnson

Journal of Power Sources· Volume 159· Issue 1
Publisher page

Abstract

Abstract Two primary parameters stand out for characterizing fuel cell system performance. The first and most important parameter is system efficiency. This parameter is relatively easy to define, and protocols for its assessment are already available. Another important parameter yet to be fully considered is system degradation. Degradation is important because customers desire to know how long their purchased fuel cell unit will last. The measure of degradation describes this performance factor by quantifying, for example, how the efficiency of the unit degrades over time. While both efficiency and degradation concepts are readily understood, the coupling between these two parameters must also be understood so that proper testing and evaluation of fuel cell systems is achieved. Tests not properly performed, and results not properly understood, may result in improper use of the evaluation data, producing improper R&D planning decisions and financial investments. This paper presents an analysis of system degradation, recommends an approach to its measurement, and shows how these two parameters are related and how one can be “traded-off” for the other.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Solid-oxide-fuel-cell performance and durability: resolution of the effects of power-conditioning systems and application loads10.1109/TPEL.2004.833992 ↗
2. Statistical geometry of reaction space in porous cermet anodes based on ion-conducting electrolytes10.1016/S0167-2738(99)00218-0 ↗
3. Dynamics of fuel cell performance degradation10.1016/j.elecom.2003.10.018 ↗
4. Incorporation of voltage degradation into a generalized steady state electrochemical model for a PEM fuel cell10.1016/S0378-7753(01)01029-1 ↗
5. Degradation of the electrical conductivity in stabilised zirconia systems. Part I: Yttria-stabilised zirconia10.1016/j.ssi.2004.07.038 ↗
6. G. Meyer, G. Gebel, L. Gonona, P. Capron, D. Marscaq, C. Marestin, R. Mercier, Degradation of sulfonated polyimide membranes in fuel cell conditions, J. Power Sources, 2005.10.1016/j.jpowsour.2005.07.049 ↗
7. XPS investigation of the PTFE induced hydrophobic properties of electrodes for low temperature fuel cells10.1016/j.apsusc.2005.02.007 ↗
8. W. Chen, G. Sun, J. Guo, X. Zhao, S. Yan, J. Tian, S. Tang, Z. Zhou, Q. Xin, Test on the degradation of direct methanol fuel cell, Electrochim. Acta, in press.10.1016/j.electacta.2005.07.016 ↗
9. Degradation of nickel anodes in alkaline fuel cells10.1016/j.jpowsour.2003.09.021 ↗
10. Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separator10.1016/0378-7753(94)02172-Y ↗
11. Chemical degradation of La1−xSrxMnO3/Y2O3-stabilized ZrO2 composite cathodes in the presence of current collector pastes10.1016/j.ssi.2004.06.004 ↗
12. Analysis of electrocatalyst degradation in PEMFC caused by cell reversal during fuel starvation10.1016/j.jpowsour.2003.12.035 ↗
13. The poisoning effect of sulfur-containing impurity gas on a SOFC anode. Part I. Dependence on temperature, time, and impurity concentration10.1016/S0167-2738(00)00653-6 ↗
14. A solid oxide fuel cell operating on hydrogen sulfide (H2S) and sulfur-containing fuels10.1016/j.jpowsour.2004.03.061 ↗
15. K.S. Weil, C.A. Coyle, J.T. Darsell, G.G. Xia, J.S. Hardy, Effects of thermal cycling and thermal aging on the hermeticity and strength of silver–copper oxide air-brazed seals, J. Power Sources, in press.
16. The U.S. Department of Energy, Office of Fossil Energy Stationary Fuel Cell Program10.1016/j.jpowsour.2004.12.003 ↗
17. Anon., 2004 Annual Progress Report–DOE Hydrogen Program, U.S. Department of Energy Report, www.eere.energy.gov/hydrogenandfuelcells/annual_report04.html, 2004.
18. Singhal · 2003
19. R.L. Loud, A.A. Slaterpryce, Gas turbine inlet air treatment, GE Power Generation Report GER-3419A, General Electric & Company, Schenectady, NY, 1991.
20. Oxidation of low calorific value gases-applying optimization techniques to combustor design
21. Industrial gas turbine engine catalytic pilot combustor prototype testing
22. P.E. Scheihing, J.A. Laurelli, Catalytic combustion system for a stationary combustion turbine having a transition duct mounted catalytic element, United States Patent 4,413,470 (November 8, 1983).
23. Development of a ship service fuel cell
24. FCV as distributed generation resources
25. Power converters for micro fuel cells
26. Control-oriented modeling and analysis for automotive fuel cell systems10.1115/1.1648308 ↗