journal article·2011-01

Modeling hydrogen starvation conditions in proton-exchange membrane fuel cells

Jan Hendrik Ohs, Ulrich Sauter, Sebastian Maass, Detlef Stolten

Journal of Power Sources· Volume 196· Issue 1
Publisher page

Abstract

Abstract In this study, a steady state and isothermal 2D-PEM fuel cell model is presented. By simulation of a single cell along the channel and in through-plane direction, its behaviour under hydrogen starvation due to nitrogen dilution is analysed. Under these conditions, carbon corrosion and water electrolysis are observed on the cathode side. This phenomenon, causing severe cell degradation, is known as reverse current decay mechanism in literature. Butler–Volmer equations are used to model the electrochemical reactions. In addition, we account for permeation of gases through the membrane and for the local water content within the membrane. The results show that the membrane potential locally drops in areas starved from hydrogen. This leads to potential gradients >1.2 V between electrode and membrane on the cathode side resulting in significant carbon corrosion and electrolysis reaction rates. The model enables the analysis of sub-stoichiometric states occurring during anode gas recirculation or load transients.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Milazzo · 1978
2. Meyers · J. Electrochem. Soc. · 2006 · 153 · A143210.1149/1.2203811 ↗
3. Reiser · Electrochem. Solid-State Lett. · 2005 · 8 · A27310.1149/1.1896466 ↗
4. Pourbaix · 1974
5. Tang · J. Power Sources · 2006 · 158 · 130610.1016/j.jpowsour.2005.10.059 ↗
6. Darling · J. Electrochem. Soc. · 2003 · 150 · A152310.1149/1.1613669 ↗
7. Liu · J. Power Sources · 2006 · 157 · 16610.1016/j.jpowsour.2005.08.006 ↗
8. Darcy · 1856
9. Curtiss · Ind. Eng. Chem. Res. · 1999 · 38 · 251510.1021/ie9901123 ↗
10. G.S. Ohm, Die galvanische Kette, Berlin, 1827.10.5479/sil.354716.39088005838644 ↗
11. Weber · J. Electrochem. Soc. · 2003 · 150 · A100810.1149/1.1580822 ↗
12. Fimrite · J. Electrochem. Soc. · 2005 · 152 · A180410.1149/1.1952627 ↗
13. Ahluwalia · J. Power Sources · 2007 · 171 · 6310.1016/j.jpowsour.2007.01.032 ↗
14. Jaouen · J. Electrochem. Soc. · 2002 · 149 · A43710.1149/1.1456916 ↗
15. Levenspiel · 1999
16. Taylor · 1993
17. Zawodzinski · J. Electrochem. Soc. · 1993 · 140 · 104110.1149/1.2056194 ↗
18. Agmon · Chem. Phys. Lett. · 1995 · 244 · 45610.1016/0009-2614(95)00905-J ↗
19. Bird · 2002
20. Dannenberg · J. Appl. Electrochem. · 2000 · 30 · 137710.1023/A:1026534931174 ↗
21. M. Sundaresan, A thermal model to evaluate sub-freezing startup for a direct hydrogen hybrid fuel cell vehicle polymer electrolyte fuel cell stack and system, Dissertation, University of California, Davis, 2004.
22. Poling · 2001