Nickel foam-supported polyaniline cathode prepared with electrophoresis for improvement of rechargeable Zn battery performance
Source abstract
Abstract
Abstract Porous nickel foam is used as a substrate for the development of rechargeable zinc//polyaniline battery, and the cathode electrophoresis of PANI microparticles in non-aqueous solution is applied to the fabrication of Ni foam supported PANI electrode, in which the corrosion of the nickel foam substrate is prohibited. The Ni foam supported PANI cathode with high loading is prepared by PANI electrophoretic deposition, and followed by PANI slurry casting under vacuum filtration. The electrochemical charge storage performance for PANI material is significantly improved by using nickel foam substrate via the electrophoretic interlayer. The specific capacity of the nickel foam-PANI electrode with the electrophoretic layer is higher than the composite electrode without the electrophoretic layer, and the specific capacity of PANI supported by Ni foam reaches up to 183.28 mAh g −1 at the working current of 2.5 mA cm −2 . The present electrophoresis deposition method plays the facile procedure for the immobilization of PANI microparticles onto the surface of non-platinum metals, and it becomes feasible to the use of the Ni foam supported PANI composite cathode for the Zn/PANI battery in weak acidic electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced battery technologies research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A large area, flexible polyaniline/buckypaper composite with a core–shell structure for efficient supercapacitors10.1039/C4TA00089G ↗
2. Nickel foam based polypyrrole–Ag composite film: a new route toward stable electrodes for supercapacitors10.1039/C2NJ40590C ↗
3. Polyaniline doped with dimethyl sulfate as a nucleophilic dopant and its electrochemical properties as an electrode in a lithium secondary battery and a redox supercapacitor10.1021/jp064243a ↗
4. Preparation of activated carbon from polyaniline by zinc chloride activation as supercapacitor electrodes10.1007/s10008-010-1258-7 ↗
5. Performance study of magnesium-polyaniline rechargeable battery in 1-ethyl-3-methylimidazolium ethyl sulfate electrolyte10.1016/j.synthmet.2013.06.016 ↗
6. Synthesis of polyaniline/graphite composite as a cathode of Zn-polyaniline rechargeable battery10.1016/j.jpowsour.2007.02.090 ↗
7. Electrophoretically deposited polyaniline/ZnO nanoparticles for p–n heterostructure diodes10.1016/j.spmi.2009.09.007 ↗
8. Preparation of polyaniline/phosphorylated poly(vinyl alcohol) nanoparticles and their aqueous redispersion stability10.1002/aic.12301 ↗
9. High-power nickel/metal-hydride battery using new micronetwork substrate: discharge rate capability and cycle-life performance10.1016/j.jpowsour.2007.06.211 ↗
10. Analytical assessment of the thermal behavior of nickel–metal hydride batteries during fast charging10.1016/j.jpowsour.2013.06.086 ↗
11. Thermal behavior of overcharged nickel/metal hydride batteries10.1016/j.jpowsour.2008.03.059 ↗
12. Long cycle-life LiFePO4/Cu-Sn lithium ion battery using foam-type three-dimensional current collector10.1016/j.jpowsour.2009.10.014 ↗
13. Three-dimensional graphene/LiFePO4 nanostructures as cathode materials for flexible lithium-ion batteries10.1016/j.materresbull.2013.05.118 ↗
14. Three-dimensional Ni(OH)2 nanoflakes/graphene/nickel foam electrode with high rate capability for supercapacitor applications10.1016/j.ijhydene.2014.03.067 ↗
15. The corrosion performance of polyaniline on nickel plated mild steel10.1016/j.apsusc.2004.08.002 ↗
16. Nickel foam-supported porous NiO/polyaniline film as anode for lithium ion batteries10.1016/j.elecom.2008.06.020 ↗
17. Enhanced performance of flexible dye-sensitized solar cell based on nickel sulfide/polyaniline/titanium counter electrode10.1016/j.electacta.2014.10.075 ↗
18. Electropolymerization of aniline in acid media on the bare and chemically pre-treated aluminum electrodes10.1016/j.electacta.2006.11.050 ↗
19. Electrochemically deposited crystalline thin film of polyaniline on nickel for redox reactions at positive potentials10.1016/S0379-6779(02)00099-1 ↗
20. Electrodeposition of polyaniline on aluminium alloys for corrosion prevention—a study using the wire beam electrode (WBE)10.1016/j.mseb.2006.02.035 ↗
21. A single flow zinc//polyaniline suspension rechargeable battery10.1016/j.jpowsour.2013.04.095 ↗
22. Electrosynthesis of polyaniline/SiO2 composite at high pH in the absence of extra supporting electrolyte10.1007/s00289-006-0653-9 ↗
23. Controlled electrophoretic patterning of polyaniline from a colloidal suspension10.1021/ja0441763 ↗
24. Doping of polyaniline by transition-metal salts10.1021/ma035677w ↗
25. Polyaniline: electrochemistry and application to rechargeable batteries10.1016/0379-6779(87)90911-8 ↗
26. Polyaniline: allowed oxidation states10.1016/0379-6779(91)91166-8 ↗
27. Aqueous zinc–polyaniline secondary battery10.1016/j.synthmet.2008.01.008 ↗
28. Synthesis of polyaniline/graphite composite as a cathode of Zn-polyaniline rechargeable battery10.1016/j.jpowsour.2007.02.090 ↗
29. A study on open circuit voltage reduction as a main drawback of Zn–polyaniline rechargeable batteries10.1016/j.synthmet.2005.06.009 ↗