Severe dual atmosphere effect at 600 °C for stainless steel 441
Source abstract
Abstract
AISI 441 foils of 0.2 mm thickness were exposed in a dual atmosphere setup in which one side was exposed to air −3% H2O and the other to Ar −5% H2 – 3% H2O. The experiment was performed at 600 °C and was referenced against exposures in air +3% H2O on both sides. The exposure conditions were chosen to simulate the conditions of an interconnect in intermediate temperature solid oxide fuel cell stacks (IT-SOFC). A strong dual atmosphere effect was observed: local breakaway corrosion was discovered after only 1000 h on samples exposed to dual atmospheres. After 3000 h iron oxide had propagated to cover the entire surface area of the sample. In comparison, the samples exposed in single atmosphere formed thin protective chromia scales on both sides even after 3000 h of exposure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Life cycle assessment of fuel cell-based APUs10.1016/j.jpowsour.2004.07.025 ↗
2. Solid oxide fuel cell technology – features and applications10.1016/j.ssi.2004.07.042 ↗
3. Energy and carbon payback times for solid oxide fuel cell based domestic CHP10.1016/j.ijhydene.2011.10.060 ↗
4. Electrodeposition of CoMn onto stainless steels interconnects for increased lifetimes in SOFCs
5. Coated stainless steel 441 as interconnect material for solid oxide fuel cells: oxidation performance and chromium evaporation10.1016/j.jpowsour.2013.08.089 ↗
6. Characterization of iron-based alloy interconnects for reduced temperature solid oxide fuel cells10.1016/S0167-2738(99)00329-X ↗
7. Life prediction of coated and uncoated metallic interconnect for solid oxide fuel cell applications10.1016/j.jpowsour.2008.12.143 ↗
8. Kofstad · 1988
9. Chromium deposition and poisoning of cathodes of solid oxide fuel cells – a review10.1016/j.ijhydene.2013.10.042 ↗
10. Methods to quantify reactive chromium vaporization from solid oxide fuel cell interconnects10.1149/2.0041409jes ↗
11. The influence of Cr evaporation on long term Cr depletion rates in ferritic stainless steels10.1007/s11085-015-9552-5 ↗
12. Influence of water vapor and flow rate on the high-temperature oxidation of 304L; effect of chromium oxide hydroxide evaporation10.1023/A:1004642310974 ↗
13. Oxidation behavior of ferritic stainless steels under SOFC interconnect exposure conditions10.1149/1.1810393 ↗
14. Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions10.1016/j.ssi.2005.03.019 ↗
15. Oxidation behavior of stainless steel 430 and 441 at 800 °C in single (air/air) and dual atmosphere (air/hydrogen) exposures10.1016/j.ijhydene.2007.12.067 ↗
16. The effect of dual atmosphere conditions on the corrosion of Sandvik Sanergy HT10.1016/j.ijhydene.2011.10.096 ↗
17. Dual atmosphere study of the K41X stainless steel for interconnect application in high temperature water vapour electrolysis10.1016/j.ijhydene.2015.01.116 ↗
18. Oxidation behavior of Fe–16Cr alloy interconnect for SOFC under hydrogen potential gradient10.1016/j.ssi.2004.02.008 ↗
19. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
20. Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900 °C10.3184/096034005782744461 ↗
21. Anomalous temperature dependence of oxidation kinetics during steam oxidation of ferritic steels in the temperature range 550–650 °C10.1016/j.corsci.2004.01.010 ↗
22. Temperature dependence of oxide scale formation on high-Cr ferritic steels in Ar–H2–H2O10.1016/j.corsci.2011.02.031 ↗
23. Effect of chromium content on the oxidation behaviour of ferritic steels for applications in steam atmospheres at high temperatures10.1007/s11085-008-9134-x ↗
24. Dual-environment effects on the oxidation of metallic interconnects10.1361/105994906X117198 ↗
25. High-temperature, dual-atmosphere corrosion of solid-oxide fuel cell interconnects10.1007/s11837-012-0473-3 ↗
26. Investigation of chromium volatilization from FeCr interconnects by a denuder technique10.1149/1.3462987 ↗
27. The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for solid oxide fuel cells10.1016/j.jpowsour.2015.04.040 ↗
28. Metallic interconnectors for solid oxide fuel cells – a review
29. Oxidation behavior of coated and preoxidized ferritic steel in single and dual atmosphere exposures at 800°C10.1016/j.surfcoat.2011.09.054 ↗
30. Microstructural investigation of protective and non-protective oxides on 11% chromium steel10.1007/s11085-006-9035-9 ↗
31. Oxidation of Fe–10Cr in O2 and in O2+H2O environment at 600°C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
32. Oxidation of binary FeCr alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O environment at 600 °C10.1007/s11085-010-9229-z ↗
33. Mechanisms of breakaway oxidation and application to a chromia-forming steel10.1023/A:1018855914737 ↗
34. Mechanisms of oxidation
35. Concentration profiles in the underlying alloy during the oxidation of iron-chromium alloys10.1016/0001-6160(67)90066-1 ↗
36. Critical hydrogen concentration for the brittle fracture of AISI 430 stainless steel10.1149/1.1837100 ↗
37. Enhanced internal oxidation as trigger for breakaway oxidation of Fe–Cr alloys in gases containing water vapor10.1016/j.scriptamat.2007.06.058 ↗
38. The effect of water vapor on selective oxidation of Fe–Cr alloys10.1007/s11085-007-9090-x ↗
39. The oxidation of ferritic stainless steels in simulated solid-oxide fuel-cell atmospheres10.1007/s11085-006-9041-y ↗
40. Sigma-phase formation in high chromium ferritic steels at 650 °C10.1016/j.jallcom.2015.03.076 ↗
41. Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 °C10.1016/j.jpowsour.2014.07.189 ↗
42. Potential suitability of ferritic and austenitic steels as interconnect materials for solid oxide fuel cells operating at 600°C10.1016/j.jpowsour.2010.06.007 ↗
43. Reduction of chromium vaporization from SOFC interconnectors by highly effective coatings10.1016/j.jpowsour.2006.08.013 ↗
44. Chromia scale adhesion on 430 stainless steel: effect of different surface treatments10.1016/j.jpowsour.2008.03.080 ↗
45. Oxidation of Co- and Ce-nanocoated FeCr steels: a microstructural investigation10.1016/j.surfcoat.2012.08.096 ↗
46. The effect of Ce on the high temperature oxidation properties of a Fe–22%Cr steel: microstructural investigation and EELS analysis10.1179/0960340914Z.00000000084 ↗