Maximum power output and load matching of a phosphoric acid fuel cell-thermoelectric generator hybrid system
Source abstract
Abstract
Abstract Based on the current models of phosphoric acid fuel cells (PAFCs) and thermoelectric generators (TGs), a new hybrid system is proposed, in which the effects of multi-irreversibilities resulting from the activation, concentration, and ohmic overpotentials in the PAFC, Joule heat and heat leak in the TG, finite-rate heat transfer between the TG and the heat reservoirs, and heat leak from the PAFC to the environment are taken into account. Expressions for the power output and efficiency of the PAFC, TG, and hybrid system are analytically derived and directly used to discuss the performance characteristics of the hybrid system. The optimal relationship between the electric currents in the PAFC and TG is obtained. The maximum power output is numerically calculated. It is found that the maximum power output density of the hybrid system will increase about 150 Wm−2, compared with that of a single PAFC. The problem how to optimally match the load resistances of two subsystems is discussed. Some significant results for practical hybrid systems are obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Liquid phase migration effects on the evaporative and condensational dissipation of phosphoric acid in phosphoric acid fuel cell10.1016/j.jpowsour.2011.10.063 ↗
2. A novel, easily synthesized, anhydrous derivative of phosphoric acid for use in electrolyte with phosphoric acid-based fuel cells10.1016/j.jpowsour.2013.03.003 ↗
3. Novel polyolefin/silicon dioxide/H3PO4 composite membranes with spatially heterogeneous structure for phosphoric acid fuel cell10.1016/j.ijhydene.2013.01.124 ↗
4. Mitigating phosphate anion poisoning of cathodic Pt/C catalysts in phosphoric acid fuel cells10.1021/jp309282n ↗
5. Multi-objective optimisation analysis and load matching of a phosphoric acid fuel cell system10.1016/j.ijhydene.2011.11.030 ↗
6. Development of a novel computational tool for optimizing the operation of fuel cells systems: application for phosphoric acid fuel cells10.1016/j.jpowsour.2008.06.081 ↗
7. Phosphoric acid fuel cells: fundamentals and applications10.1016/j.cossms.2005.01.001 ↗
8. Fuji electric phosphoric acid fuel cell activities10.1016/0378-7753(90)80012-3 ↗
9. Phosphoric acid fuel cells (PAFCs) for commercialization10.1016/0360-3199(92)90175-V ↗
10. Effect of surface groups on the electrocatalytic behaviour of Pt–Fe–Co alloy-dispersed carbon electrodes in the phosphoric fuel cell10.1016/S0378-7753(98)00191-8 ↗
11. Platinum catalyst degradation in phosphoric acid fuel cell for stationary applications10.1016/j.jpowsour.2011.01.027 ↗
12. A fuel cell operating between room temperature and 250 °C based on a new phosphoric acid based composite electrolyte10.1016/j.jpowsour.2010.04.076 ↗
13. Predicting the effects of process parameters on the performance of phosphoric acid fuel cells using a 3-D numerical approach10.1016/j.enconman.2006.03.030 ↗
14. A two-dimensional steady-state model for phosphoric acid fuel cells (PAFC)10.1016/S0378-7753(02)00369-5 ↗
15. Effects of flow rate and starvation of reactants gases on the performance of phosphoric fuel cells10.1016/S0378-7753(99)00450-4 ↗
16. Step response analysis of phosphoric acid fuel cell (PAFC) cathode through a transient model10.1016/j.jpowsour.2004.07.035 ↗
17. Electrical characterization of a 2.5 kW phosphoric acid fuel cell stack operating on simulated reformed biogas10.1016/0360-5442(89)90042-X ↗
18. Development of a 1 kW phosphoric acid fuel cell stack10.1016/S0306-2619(98)00031-2 ↗
19. Performance of serpentine passages in the cooling system of a phosphoric fuel cell stack10.1016/0894-1777(94)90077-9 ↗
20. Exergetic and thermoeconomic analysis of a 200-kW phosphoric acid fuel cell plant10.1016/j.fuel.2004.04.002 ↗
21. A phosphoric acid fuel cell cogeneration system retrofit to a large office building
22. Development of prototype phosphoric acid fuel cell pick-up electric vehicle
23. Influence of the operating conditions and of the ageing upon the electrochemical performance of a phosphoric acid fuel cell10.1016/0378-7753(93)90003-J ↗
24. Effects of storage conditions on the performance of phosphoric fuel cells10.1016/0378-7753(92)80143-Y ↗
25. Composites based on cardo polybenzimidazole and hydrated silicon dioxide for phosphoric acid fuel cells10.1134/S0036023612010147 ↗
26. PAFC operation performance verified by Japanese gas utilities10.1016/S0378-7753(99)00409-7 ↗
27. Highly efficient heat recovery system for phosphoric acid fuel cells used for cooling telecommunication equipment10.1016/S0378-7753(99)00411-5 ↗
28. Fuel cell operation on landfill gas at Penrose Power Station10.1016/S0360-5442(99)00022-5 ↗
29. Investment in volume building: the ‘virtuous cycle’ in PAFC10.1016/S0378-7753(97)02769-9 ↗
30. A review of integration strategies for solid oxide fuel cells10.1016/j.jpowsour.2009.07.045 ↗
31. Thermodynamic modeling and optimum design strategy of a generic solid oxide fuel cell-based hybrid system10.1021/ef300839m ↗
32. An improved dynamic model considering effects of temperature and equivalent internal resistance for PEM fuel cell power modules10.1016/j.jpowsour.2006.05.030 ↗
33. The efficient and economic design of PEM fuel cell systems by multi-objective optimization10.1016/j.jpowsour.2007.01.022 ↗
34. The parametric optimum analysis of a proton exchange membrane (PEM) fuel cell and its load matching10.1016/j.energy.2010.07.034 ↗
35. Multi-objective and multi-parameter optimization of a thermoelectric generator module10.1016/j.energy.2014.04.082 ↗
36. New bounds on the performance parameters of a thermoelectric generator
37. Optimal design of a multi-couple thermoelectric generator10.1088/0268-1242/15/2/318 ↗
38. Experimental study on low-temperature waste heat thermoelectric generator10.1016/j.jpowsour.2008.12.067 ↗
39. A mathematic model of thermoelectric module with applications on waste heat recovery from automobile engine10.1016/j.energy.2009.11.030 ↗
40. Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system10.1016/j.apenergy.2010.02.013 ↗
41. Performance and evaluation of a fuel cell-thermoelectric generator hybrid system10.1002/fuce.200900208 ↗
42. Complex thermoelectric materials10.1038/nmat2090 ↗
43. High-performance flat-panel solar thermoelectric generators with high thermal concentration10.1038/nmat3013 ↗
44. A high-performance phosphoric acid fuel cell10.1016/S0378-7753(01)00766-2 ↗
45. Larminie · 2003
46. Equivalent power output and parametric optimum design of a PEM fuel cell-based hybrid system10.1016/j.ijepes.2014.06.014 ↗