Eliminating pre-lithiation step for making high energy density hybrid Li-ion capacitor
Source abstract
Abstract
Abstract Pre-lithiation is an indispensable step for making hybrid lithium-ion capacitors (LICs), its high cost and process complexity have greatly hindered the commercialization of LICs. Aiming to eliminate the pre-lithiation step, we propose an in-situ lithiation concept by introducing a Li + ion source material into the positive electrode to enable the lithiation to be completed in the formation cycle. In this paper we start with the fundamental principle of LICs to discuss the requirements for Li + ion source materials and demonstrate this concept by employing Li-rich Li 2 CuO 2 as the Li + ion source material, natural graphite and activated carbon (AC) as the negative and positive electrode materials. It is shown that the LICs made such behave as a pure capacitor with ability to deliver the same level of specific capacity and specific capacitance, i.e., 56 mAh g −1 and 143 F g −1 vs. the mass of AC in the voltage range between 2.8 V and 4.2 V, as those obtained from the counterpart Li/AC half-cell. The present concept is also applicable to other LICs with the negative electrode required to be pre-lithiated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Theoretical energy density for electrochemical capacitors with intercalation electrodes10.1149/1.1997152 ↗
2. An advanced hybrid electrochemical capacitor that uses a wide potential range at the positive electrode10.1149/1.2349495 ↗
3. Electrochemical double layer capacitor and lithium-ion capacitor based on carbon black10.1016/j.jpowsour.2011.06.019 ↗
4. Pre-lithiated graphene nanosheets as negative electrode materials for Li-ion capacitors with high power and energy density10.1016/j.jpowsour.2014.04.076 ↗
5. A high performance Li-ion capacitor constructed with Li4Ti5O12/C hybrid and porous graphene macroform10.1016/j.jpowsour.2015.02.028 ↗
6. Mesocrystal MnO cubes as anode for Li-ion capacitors10.1016/j.nanoen.2016.02.035 ↗
7. Rational design of stable 4 V lithium ion capacitor10.1016/j.nanoen.2016.07.018 ↗
8. Effect of pre-lithiation degrees of mesocarbon microbeads anode on the electrochemical performance of lithium-ion capacitors10.1016/j.electacta.2014.01.040 ↗
9. Cycle performance of lithium-ion capacitors using graphite negative electrodes at different pre-lithiation levels10.1016/j.est.2015.05.005 ↗
10. High-energy Li-ion hybrid supercapacitor enabled by a long life N-rich carbon based anode10.1016/j.electacta.2016.08.004 ↗
11. Different types of pre-lithiated hard carbon as negative electrode material for lithium-ion capacitors10.1016/j.electacta.2015.11.055 ↗
12. Lithium-ion capacitors with 2D Nb2CTx (MXene)-carbon nanotube electrodes10.1016/j.jpowsour.2016.03.066 ↗
13. Lithium-ion capacitors using carbide-derived carbon as the positive electrode –A comparison of cells with graphite and Li4Ti5O12 as the negative electrode10.1016/j.jpowsour.2016.09.010 ↗
14. Development of a lithium-type advanced energy storage device10.1149/1.1813671 ↗
15. Evaluation of lithium-ion capacitors assembled with pre-lithiated graphite anode and activated carbon cathode10.1016/j.electacta.2012.01.076 ↗
16. Lithiation of amorphous carbon negative electrode for Li ion capacitor10.1016/j.jelechem.2012.08.029 ↗
17. High performance lithium-ion hybrid capacitors with pre-lithiated hard carbon anodes and bifunctional cathode electrodes10.1016/j.jpowsour.2014.07.146 ↗
18. Li-ion capacitors with carbon cathode and hard carbon/stabilized lithium metal powder anode electrodes10.1016/j.jpowsour.2012.04.033 ↗
19. Development and characterization of Li-ion capacitor pouch cells10.1016/j.jpowsour.2014.01.087 ↗
20. Pre-lithiation design and lithium ion intercalation plateaus utilization of mesocarbon microbeads anode for lithium-ion capacitors10.1016/j.electacta.2015.09.074 ↗
21. Enhanced performance of Li-ion cell with LiBF4-PC based electrolyte by addition of small amount of LiBOB10.1016/j.jpowsour.2005.04.023 ↗
22. An unique lithium salt for the improved electrolyte of Li-ion battery10.1016/j.elecom.2006.06.016 ↗
23. The influence of pore size and surface area of activated carbons on the performance of ionic liquid based supercapacitors,10.1039/c3cp52909f ↗
24. Reversible electrochemical reaction of CuO with Li in the LiCuO2 system10.1016/j.ssi.2011.12.006 ↗
25. Study of the charging process of a LiCoO2-based Li-ion battery10.1016/j.jpowsour.2006.02.087 ↗
26. Li2CuO2 as an additive for capacity enhancement of lithium ion cells10.1016/S0378-7753(03)00236-2 ↗
27. Lithium transport in ternary lithium-copper-oxygen cathode materials10.1016/0167-2738(86)90263-8 ↗
28. Electrochemical and structural study of Li2CuO2, LiCuO2 and NaCuO210.1016/S0167-2738(97)00485-2 ↗
29. Synthesis, phase stability, and electrochemically driven transformations in the LiCuO2-Li2CuO2 system10.1021/cm0508266 ↗
30. Electrolyte-directed reactions of the oxygen electrode in lithium-air batteries10.1149/2.0041502jes ↗
31. Surface-mediated solvent decomposition in Li-air batteries: impact of peroxide and superoxide surface terminations10.1021/acs.jpcc.5b00256 ↗
32. EIS study on the formation of solid electrolyte interface in Li-ion battery10.1016/j.electacta.2005.02.137 ↗