journal article·2007-01Open access

Low temperature solid oxide fuel cells with pulsed laser deposited bi-layer electrolyte

Dongfang Yang, Xinge Zhang, Suwas Nikumb, Cyrille Decès-Petit, Rob Hui, Radenka Maric, Dave Ghosh

Journal of Power Sources· Volume 164· Issue 1

Abstract

Abstract Solid oxide fuel cells (SOFC) using a pulsed laser deposited bi-layer electrolyte have been successfully fabricated and have shown very good performance at low operating temperatures. The cell reaches power densities of 0.5 W cm−2 at 550 °C and 0.9 W cm−2 at 600 °C, with open circuit voltage (OCV) values larger than 1.04 V. The bi-layer electrolyte contains a 6–7 μm thick samarium-doped ceria (SDC) layer deposited over a ∼1 μm thick scandium-stabilized zirconia (ScSZ) layer. The electrical leaking between the anode and cathode through the SDC electrolyte, which due to the reduction of Ce4+ to Ce3+ in reducing environment when using a single layer SDC electrolyte, has been eliminated by adopting the bi-layer electrolyte concept. Both ScSZ and SDC layers in the bi-layer electrolyte prepared by the pulsed laser deposition (PLD) technique are the highly conductive cubic phases. Poor conductive (Zr, Ce)O2-based solid solutions or β-phase ScSZ were not found in the bi-layer electrolyte prepared by the PLD due to low processing temperatures of the technique. Excellent reliability and flexibility of the PLD technique makes it a very promising technique for the fabrication of thin electrolyte layer for SOFCs operating at reduced temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Badwal · Ceram. Int. · 1996 · 22 · 25710.1016/0272-8842(95)00101-8 ↗
2. Eguchi · Solid State Ionics · 1992 · 52 · 16510.1016/0167-2738(92)90102-U ↗
3. Zhu · J. Power Sources · 2001 · 93 · 8210.1016/S0378-7753(00)00564-4 ↗
4. Shao · Nature · 2004 · 431 · 17010.1038/nature02863 ↗
5. Shimonosono · Solid State Ionics · 2004 · 174 · 2710.1016/j.ssi.2004.07.025 ↗
6. Arachi · Solid State Ionics · 1999 · 121 · 13310.1016/S0167-2738(98)00540-2 ↗
7. Ishii · Solid State Ionics · 1992 · 57 · 15310.1016/0167-2738(92)90078-4 ↗
8. Tsoga · Acta Mater. · 2000 · 48 · 470910.1016/S1359-6454(00)00261-5 ↗
9. Price · J. Am. Ceram. Soc. · 2005 · 88 · 181210.1111/j.1551-2916.2005.00389.x ↗
10. Zhang · J. Power Sources · 2006 · 161 · 30110.1016/j.jpowsour.2006.03.057 ↗
11. Boughaba · Thin Solid Films · 2000 · 358 · 10410.1016/S0040-6090(99)00703-8 ↗
12. Yang · 2006
13. Powder Diffraction File-2 database, Joint Committee on Powder Diffraction Standards, International Centre for Diffraction Data, USA, 1996.
14. Orel · Phys. Status Solidi B · 1994 · 186 · K3310.1002/pssb.2221860135 ↗
15. Nicolso · Sens. Actuators B · 1992 · 8 · 25310.1016/0925-4005(92)85027-T ↗
16. Zhang · J. Power Sources · 2006 · 160 · 121110.1016/j.jpowsour.2006.03.035 ↗