journal article·2004-05

Multi-objective optimization for hybrid fuel cells power system under uncertainty

Karthik Subramanyan, Urmila M. Diwekar, Amit Goyal

Journal of Power Sources· Volume 132· Issue 1-2
Publisher page

Abstract

One of the major applications of fuel cells is as onsite stationary electric power plants. Several types of configurations have been hypothesized and tested for these kinds of applications at the conceptual level but hybrid power plants are one of the most efficient. These are designs that combine a fuel cell cycle with other thermodynamic cycles to provide higher efficiency. Generally, the heat rejected by the fuel cell at a higher temperature is used in a bottoming cycle to generate steam. In this work we are considering a conceptual design of a solid oxide fuel cell-proton exchange membrane (SOFC-PEM) fuel cell hybrid power plant [R. Geisbrecht, Compact Electrochemical Reformer Based on SOFC Technology, AIChE Spring National Meeting, Atlanta, GA, 2000] in which the high temperature SOFC fuel cell acts both as electricity producer and fuel reformer for the low temperature PEM fuel cell (PEMFC). The exhaust from the PEM fuel cell goes to a waste hydrogen burner and heat recovery steam generator that produces steam for further utilizations. Optimizing this conceptual design involves consideration of a number of objectives. The process should have low pollutant emissions as well as cost competitive with the existing technology. The solution of a multi-objective optimization problem is not a single solution but a complete non-dominated or Pareto set, which includes the alternatives representing potential compromise solutions among the objectives. This makes a range of choice available to decision makers and provides them with the trade-off information among the multiple objectives effectively. This paper presents the optimal trade-off design solutions or the Pareto set for this hybrid power plant through a multi-objective optimization framework. This hybrid technology is new and the system level models used for fuel cells performance have significant uncertainties in them. In this paper, we characterize these uncertainties and study the effect of these uncertainties on the optimal trade-offs. The framework developed in this work forms the basis for optimal design and synthesis of any power plant under uncertainties in the face of multiple objectives.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Process Optimization and Integration · Advanced Multi-Objective Optimization Algorithms · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. R. Geisbrecht, Compact Electrochemical Reformer Based on SOFC Technology, AIChE Spring National Meeting, Atlanta, GA, 2000.
2. Process design for environment: a multi-objective framework under uncertainty10.1007/s100980000060 ↗
3. A. Goyal, U. Diwekar, ‘Multi-objective Process Synthesis for Designing Cost Effective Environment Friendly Processes’, 6th World Congress of Chemical Engineering, Melbourne, Australia, September 2001.
4. J. Cohon, Multi-objective Programming and Planning, Academic Press, San Diego, CA, 1978.
5. U.M. Diwekar, Introduction to Applied Optimization Kluwer Academic Publishers, Dordrecht, 2003.10.1007/978-1-4757-3745-5_1 ↗
6. C.L. Hwang, S.R.P. Masud, A.S.M. Comput. Operations Res. 7 (1980) 5–31.10.1016/0305-0548(80)90011-8 ↗
7. Y. Fu, U.M. Diwekar, An efficient sampling approach to multi-objective optimization, Annals of Operations Research, 2004, in press.10.1023/B:ANOR.0000045279.46948.dd ↗
8. Y. Fu, Ph.D. dissertation, Process Design for the Environment: A Multi-objective Optimization Framework, 2000, Department of Civil and Environmental Engineering, Carnegie Mellon University, Pittsburgh, PA.10.1007/s100980000060 ↗
9. Kalagnanam · Technometrics · 1997 · 39 · 30810.2307/1271135 ↗
10. Diwekar · AIChE J. · 1997 · 43 · 44010.1002/aic.690430217 ↗
11. U.M. Diwekar, Proceedings of Indian Academy of Sciences, vols. 3 and 4, pp. 267–283.
12. R.A. Geisbrecht, ‘Theory Based Process Modeling for Evaluation of fuel cells in Advanced Energy systems’, Spring National Meeting, New Orleans, LA, March 2002.
13. AspenTech, Aspen Plus Documentation Version 11.1, AspenTech, Cambridge, MA, 2002.
14. K. Subramanyan, U. Diwekar, User’s Manual for MOP under Uncertainty with ASPEN Plus 11.1, 2003, in preparation.