Mitigation of the irreversible capacity and electrolyte decomposition in a LiNi0.5Mn1.5O4/nano-TiO2 Li-ion battery
Source abstract
Abstract
Abstract Nanosized titanium oxides can achieve large reversible specific capacity (above 200 mAh g −1 ) and good rate capabilities, but suffer irreversible capacity losses in the first cycle. Moreover, due to the intrinsic safe operating potential (1.5 V), the use of titanium oxide requires to couple it with high-potential cathodes, such as lithium nickel manganese spinel (LNMO) in order to increase the energy density of the final cell. However the use of the 4.7 V vs. Li + /Li 0 LNMO cathode material requires to tackle the continuous electrolyte decomposition upon cycling. Coupling these two electrodes to make a lithium ion battery is thus highly appealing but also highly difficult because the cell balancing must account not only for the charge reversibly exchanged by each electrode but also for the irreversible charge losses. In this paper a LNMO-nano TiO 2 Li-ion cell with liquid electrolyte is presented: two innovative approaches on both the cathode and the anode sides were developed in order to mitigate the electrolyte decomposition upon cycling. In particular the LNMO surface was coated with ZnO in order to minimize the surface reactivity, and the TiO 2 nanoparticles where activated by incorporating nano-lithium in the electrode formulation to compensate for the irreversible capacity loss in the first cycle. With these strategies we were able to assemble balanced Li-ion coin cells thus avoiding the use of electrolyte additives and more hazardous and expensive ex-situ SEI preforming chemical or electrochemical procedures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Tarascon · Nature · 2001 · 44 · 35910.1038/35104644 ↗
2. Kim · Adv. Funct. Mater. · 2009 · 19 · 497
3. Gnanaraj · J. Power Sources · 2003 · 119–121 · 79410.1016/S0378-7753(03)00255-6 ↗
4. Wagner · J. Phys. Chem. Lett. · 2010 · 1 · 220410.1021/jz100553m ↗
5. Kitoh · J. Power Sources · 1999 · 81–82 · 88710.1016/S0378-7753(99)00125-1 ↗
6. Ozawa · 2009
7. Bruce · Angew. Chem. Int. Ed. · 2008 · 47 · 293010.1002/anie.200702505 ↗
8. Armstrong · Adv. Mater. · 2006 · 18 · 259710.1002/adma.200601232 ↗
9. Cao · Phys. Chem. C · 2010 · 114 · 1030810.1021/jp103218u ↗
10. Patoux · J. Power Sources · 2009 · 189 · 34410.1016/j.jpowsour.2008.08.043 ↗
11. Lee · Electrochem. Commun. · 2007 · 9 · 80110.1016/j.elecom.2006.11.008 ↗
12. Dedryvere · J. Phys. Chem. C · 2010 · 114 · 1099910.1021/jp1026509 ↗
13. Li · Electrochim. Acta · 2006 · 51 · 387210.1016/j.electacta.2005.11.015 ↗
14. Kang · J. Power Sources · 2010 · 195 · 202310.1016/j.jpowsour.2009.10.068 ↗
15. Armstrong · Chem. Commun. · 2005 · 245 · 4
16. Borghols · J. Electrochem. Soc. · 2010 · 157 · A58210.1149/1.3332806 ↗
17. Novak · 2010 · 263
18. Christensen · J. Electrochem. Soc. · 2005 · 152 · A81810.1149/1.1870752 ↗
19. Sun · Electrochem. Commun. · 2002 · 4 · 34410.1016/S1388-2481(02)00277-1 ↗
20. Sun · Electrochem. Solid State Lett. · 2002 · 5 · A9910.1149/1.1465375 ↗
21. Sun · Electrochim. Acta · 2003 · 48 · 50310.1016/S0013-4686(02)00717-X ↗
22. Arrebola · J. Power Sources · 2010 · 195 · 427810.1016/j.jpowsour.2010.01.004 ↗
23. Wagemaker · J. Am. Chem. Soc. · 2007 · 129 · 432310.1021/ja067733p ↗
24. Ren · Angew. Chem. Int. Ed. · 2010 · 49 · 257010.1002/anie.200907099 ↗
25. Ota · J. Power Sources · 2003 · 119–121 · 39310.1016/S0378-7753(03)00259-3 ↗
26. Gireaud · Anal. Chem. · 2006 · 78 · 368810.1021/ac051987w ↗
27. Zhang · J. Power Sources · 2006 · 162 · 137910.1016/j.jpowsour.2006.07.074 ↗