journal article·2017-08

Electrochemical and structural evaluation for bulk-type all-solid-state batteries using Li4GeS4-Li3PS4 electrolyte coating on LiCoO2 particles

Yusuke Ito, Misae Otoyama, Akitoshi Hayashi, Takamasa Ohtomo, Masahiro Tatsumisago

Publisher page

Abstract

Abstract Bulk-type all-solid-state batteries, which use composite electrodes with a powder mixture of active materials and solid electrolytes, are anticipated for large-scale power sources. However, conventional powder mixing protocols are insufficient to maintain ion-conductive pathways within composite electrodes. Herein, sulfide electrolyte coatings have attracted attention as a promising means to overcome this difficulty. We assessed the effects of sulfide electrolyte coatings for active materials on the electrochemical properties and structural changes in all-solid-state cells. A favorable electrode-electrolyte interface was formed by coating significantly small amounts (ca. 3 wt%) of Li4GeS4-Li3PS4 solid electrolyte (SE) onto LiCoO2 particles via vapor phase process. The all-solid-state cell (In/Li2S-P2S5/SE-coated LiCoO2) was charged and discharged with a larger capacity than that using non-SE-coated LiCoO2 particles, indicating that the SE-coating is effective in forming a favorable ion-conductive pathway to LiCoO2 particles. Improvement of the cell performance after heat treatment was considered to derive not only from the enhancement of ionic conductivity in the SE-coating layer, but also from the reduction of voids in the composite electrode. Less ionic resistance and denser environment are beneficial for the Li-ion supply to the deepest part in the composite electrode, which results in more homogeneous electrochemical reaction in all-solid-state cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Lithium batteries: state, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. Ultimate limits to intercalation reactions for lithium batteres10.1021/cr5003003 ↗
4. A new approach to develop safe all-inorganic monolithic Li-ion batteries10.1002/aenm.201000050 ↗
5. Three-dimensional bicontinuous nanocomposite from a self-assembled block copolymer for a high-capacity all-solid-state Lithium battery cathode10.1021/acs.chemmater.6b01665 ↗
6. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
7. New, highly ion-conductive crystals precipitated from Li2S-P2S5 glasses10.1002/adma.200401286 ↗
8. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
9. Lithium ionic conductor thio-LISICON10.1149/1.1379028 ↗
10. A lithium superionic conductor10.1038/nmat3066 ↗
11. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
12. All-solid-state lithium secondary batteries using LiCoO2 particles with pulsed laser deposition coatings of Li2S-P2S5 solid electrolytes10.1016/j.jpowsour.2010.10.103 ↗
13. Preparation of Li2S-GeS2 solid electrolyte thin films using pulsed laser deposition10.1016/j.ssi.2013.01.014 ↗
14. Liquid-phase synthesis of a Li3PS4 solid electrolyte using N-methylformamide for all-solid-state lithium batteries10.1039/c3ta15090a ↗
15. Solution-processable glass LiI-Li4SnS4 superionic conductors for all-solid-state Li-ion batteries10.1002/adma.201505008 ↗
16. Preparation of highly lithium-ion conductive 80Li2S·20P2S5 thin-film electrolytes using pulsed laser deposition10.1111/j.1551-2916.2009.03442.x ↗
17. Li4GeS4-Li3PS4 electrolyte thin films with highly ion-conductive crystals prepared by pulsed laser deposition10.2109/jcersj2.122.341 ↗
18. Raman imaging for LiCoO2 composite positive electrodes in all-solid-state lithium batteries using Li2S-P2S5 solid electrolytes10.1016/j.jpowsour.2015.10.040 ↗
19. LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries10.1016/j.elecom.2007.02.008 ↗
20. Formation of superionic crystals from mechanically milled Li2S-P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
21. All-solid-state lithium secondary batteries using sulfide-based glass ceramic electrolytes10.1142/S1793604708000071 ↗
22. Crystal structure and phase transitions of the lithium ionic conductor Li3PS410.1016/j.ssi.2010.10.001 ↗
23. Sulfide glass-ceramic electrolytes for all-solid-state lithium and sodium batteries10.1111/ijag.12084 ↗
24. Thermodynamic model for solid-state amorphization in binary systems at interfaces and grain boundaries10.1103/PhysRevB.54.9109 ↗
25. Ultrahigh tensile strengths of Al88Y2Ni9M1 (M=Mn or Fe) amorphous alloys containing finely dispersed fcc-Al particles10.2320/matertrans1989.31.747 ↗
26. Modification of interface between LiCoO2 electrode and Li2S-P2S5 solid electrolyte using Li2O-SiO2 glassy layers10.1149/1.3005972 ↗
27. A rocking chair type all-solid-state lithium ion battery adopting Li2O-ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte10.1016/j.jpowsour.2013.10.005 ↗
28. Application of LiCoO2 particles coated with lithium ortho-oxosalt thin films to sulfide-type all-solid-state lithium batteries10.1149/2.0771508jes ↗
29. Enhanced electrochemical performance of surface modified LiCoO2 for all-solid-state lithium batteries10.1016/j.ceramint.2015.09.126 ↗
30. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
31. Charge transfer reaction at the lithium phosphorus oxynitride glass electrolyte/lithium cobalt oxide thin film interface10.1016/j.ssi.2005.02.025 ↗
32. Visualization of the state-of-charge distribution in a LiCoO2 cathode by in situ Raman imaging10.1149/2.061310jes ↗
33. Raman study of layered rock-salt LiCoO2 and its electrochemical lithium deintercalation10.1002/(SICI)1097-4555(199708)28:8<613::AID-JRS138>3.0.CO;2-T ↗
34. Bulk-type all solid-state batteries with 5 V Class LiNi0.5Mn1.5O4 cathode and Li10GeP2S12 solid electrolyte10.1021/acs.chemmater.5b04940 ↗
35. Fabrication and electrochemical properties of a LiCoO2 and Li10GeP2S12 composite electrode for use in all-solid-state batteries10.1016/j.ssi.2015.05.007 ↗