journal article·2016-09Open access

The reasons for the high power density of fuel cells fabricated with directly deposited membranes

Severin Vierrath, Matthias Breitwieser, Matthias Klingele, Benjamin Britton, Steven Holdcroft, Roland Zengerle, Simon Thiele

Abstract

Abstract In a previous study, we reported that polymer electrolyte fuel cells prepared by direct membrane deposition (DMD) produced power densities in excess of 4 W/cm2. In this study, the underlying origins that give rise to these high power densities are investigated and reported. The membranes of high power, DMD-fabricated fuel cells are relatively thin (12 μm) compared to typical benchmark, commercially available membranes. Electrochemical impedance spectroscopy, at high current densities (2.2 A/cm2) reveals that mass transport resistance was half that of reference, catalyst-coated-membranes (CCM). This is attributed to an improved oxygen supply in the cathode catalyst layer by way of a reduced propensity of flooding, and which is facilitated by an enhancement in the back diffusion of water from cathode to anode through the thin directly deposited membrane. DMD-fabricated membrane-electrode-assemblies possess 50% reduction in ionic resistance (15 mΩcm2) compared to conventional CCMs, with contributions of 9 mΩcm2 for the membrane resistance and 6 mΩcm2 for the contact resistance of the membrane and catalyst layer ionomer. The improved mass transport is responsible for 90% of the increase in power density of the DMD fuel cell, while the reduced ionic resistance accounts for a 10% of the improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Klingele · J. Mater. Chem. A · 2015 · 3 · 1123910.1039/C5TA01341K ↗
2. Breitwieser · Electrochem. Commun. · 2015 · 60 · 16810.1016/j.elecom.2015.09.006 ↗
3. Wehkamp · RSC Adv. · 2016 · 6 · 2426110.1039/C5RA27462A ↗
4. Weber · J. Electrochem. Soc. · 2014 · 161 · F125410.1149/2.0751412jes ↗
5. Albery · J. Electroanal. Chem. Interfacial Electrochem. · 1990 · 288 · 1510.1016/0022-0728(90)80022-X ↗
6. Lefebvre · Electrochem. Solid-State Lett. · 1999 · 2 · 25910.1149/1.1390804 ↗
7. Wang · 2012
8. Rezaei Niya · J. Power Sour. · 2013 · 240 · 28110.1016/j.jpowsour.2013.04.011 ↗
9. Springer · J. Electrochem. Soc. · 1996 · 587
10. Carter · ECS Trans. · 2007 · 11 · 40310.1149/1.2780954 ↗
11. Peron · J. Membr. Sci. · 2010 · 356 · 4410.1016/j.memsci.2010.03.025 ↗
12. Buchi · J. Electrochem. Soc. · 2001 · 148 · A18310.1149/1.1345868 ↗
13. B1440
14. Cooper · J. Electrochem. Soc. · 2010 · 157 · B173110.1149/1.3481561 ↗
15. Pivovar · J. Electrochem. Soc. · 2007 · 154 · B73910.1149/1.2740005 ↗
16. Liu · ECS Trans. · 2007 · 11 · 47310.1149/1.2780961 ↗
17. Makharia · J. Electrochem. Soc. · 2005 · 152 · A97010.1149/1.1888367 ↗
18. Yuan · Int. J. Hydrogen Energy · 2007 · 32 · 436510.1016/j.ijhydene.2007.05.036 ↗
19. Cooper · 2005
20. Barbir · 2012
21. Freire · J. Electroanal. Chem. · 2001 · 503 · 5710.1016/S0022-0728(01)00364-3 ↗
22. Paganin · Electrochim. Acta · 1998 · 43 · 376110.1016/S0013-4686(98)00135-2 ↗
23. Li · J. Power Sour. · 2008 · 178 · 10310.1016/j.jpowsour.2007.12.068 ↗
24. Voss · Electrochim. Acta · 1995 · 40 · 32110.1016/0013-4686(94)00266-4 ↗
25. Andreaus · Electrochim. Acta · 2002 · 47 · 222310.1016/S0013-4686(02)00059-2 ↗
26. Adachi · J. Electrochem. Soc. · 2009 · 156 · B78210.1149/1.3116922 ↗
27. Adachi · J. Membr. Sci. · 2010 · 364 · 18310.1016/j.memsci.2010.08.011 ↗
28. Water management in novel direct membrane deposition fuel cells under low humidification10.1016/j.ijhydene.2016.05.018 ↗
29. Jeon · Sci. Rep. · 2015 · 5 · 1639410.1038/srep16394 ↗
30. Ohma · Electrochim. Acta · 2011 · 56 · 1083210.1016/j.electacta.2011.04.058 ↗