Role of the cathode and anode in heat generation of Li-ion cells as a function of state of charge
Source abstract
Abstract
Abstract Thermal stability of Li-ion cells (from two different manufacturers, A and B) and their cathodes and anodes were evaluated as a function of state of charge (SOC) using accelerating rate calorimetry (ARC). Cell A was rated at 750 mAh and consisted of Sn-doped LiCoO 2 cathode and meso-carbon micro-fiber (MCMF) anode. Cell B was rated at 790 mAh and was comprised of a cathode and an anode made of LiCoO 2 and graphite. The electrolytes in cells A and B were mixtures of EC:EMC + 1MLiPF 6 and EC:EMC:DMC + 1MLiPF 6 , respectively. ARC results indicated that between 50 and 125% SOC, the total heat generated by cell A is mostly dominated by self-heating of the cathode, while between 125 and 200% SOC the total heat generated by the cell was dominated by the anode. The total heat generated in cell B, however, was dominated by self-heating of the graphite anode, over the entire 50–200% SOC range. Also, the self-heating in cell B was higher than that for cell A. Heat generation of the LiCoO 2 increases with increasing SOC, and the Sn-LiCoO 2 heat generation reaches a maximum near 125% SOC. At low SOC, the temperature of the onset of chemical reaction ( T OSCR ) for cell A was higher than that for the cell B. For both cells, at higher SOC, T OSCR decreased with a sharp drop between 100 and 150% SOC. Overall results show that cell A offers a higher thermal stability than cell B. Also, the ARC test is more suitable than differential scanning calorimetry for correlation of cathode and anode heat generations to the thermal performance of full Li-ion cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. D. Aurbach, M.D. Levi, E. Levi, B. Markovsky, G. Salitra, H. Teller, in: C.F. Holmes, A.R. Landgrebe (Eds.), Batteries for Portable Applications and Electric Vehicles, PV 97 -18, The Electrochemical Society Proceeding Series, Pennington, NJ. 1997, p. 941.
2. Peled · J. Electrochem. Soc · 1997 · 144 · L20810.1149/1.1837858 ↗
3. Fong · J. Electrochem. Soc · 1990 · 137 · 200910.1149/1.2086855 ↗
4. R. Yazami, in: G. Pistoia (Ed.), Lithium Batteries: New Materials, Developments and Prospective, Elsevier, New York, 1994, p. 49.
5. Aurbach · J. Electrochem. Soc · 1994 · 141 · 60310.1149/1.2054777 ↗
6. Peled · J. Electrochem. Soc · 1997 · 144 · L20810.1149/1.1837858 ↗
7. Aurbach · J. Electrochem. Soc · 1995 · 142 · 288210.1149/1.2048659 ↗
8. Kanamura · J. Electroanal. Chem · 1995 · 394 · 4910.1016/0022-0728(95)03972-J ↗
9. Kanamura · J. Electrochem. Soc · 1990 · 137 · 200910.1149/1.2086855 ↗
10. C. Menachem, D. Golodnitsky, E. Peled, Electrochemical Society and International Society of Electrochemistry Proceeding, abstract no. 138, Paris, France, 1995, p. 157.
11. Du Pasquier · J. Electrochem. Soc · 1998 · 145 · 47210.1149/1.1838287 ↗
12. Maleki · J. Electrochem. Soc · 1999 · 146 · 322410.1149/1.1392458 ↗
13. Dahn · Solid State Ionics · 1994 · 69 · 26510.1016/0167-2738(94)90415-4 ↗
14. Zhang · J. Power Sources · 1998 · 70 · 1610.1016/S0378-7753(97)02611-6 ↗
15. Maleki · J. Electrochem. Soc · 2000 · 147 · 447010.1149/1.1394088 ↗
16. Wainwright · J. Power Sources · 1995 · 54 · 19210.1016/0378-7753(94)02065-B ↗
17. W.W.M. Wendladt, Thermal Method of Analysis, vol. 19, John Wiley & Sons, New York, 1974.
18. Accelerating Rate Calorimetry (ARC) Manual, Arthur D. Little Inc., Cambridge, MA, 1998.
19. Richard · J. Power Sources · 1999 · 70 · 13510.1016/S0378-7753(99)00055-5 ↗
20. D.D. MacNeil, J.R. Dahn, (http://www.Physics.dal.ca/∼dohn/dean/carbon99.html).
21. Wang · Electrochem. Solid State Lett · 2001 · 4 · A6810.1149/1.1368716 ↗