journal article·2007-06

Analysis of the design of a pressurized SOFC hybrid system using a fixed gas turbine design

S.K. Park, K.S. Oh, T.S. Kim

Journal of Power Sources· Volume 170· Issue 1
Publisher page

Abstract

Design characteristics and performance of a pressurized solid oxide fuel cell (SOFC) hybrid system using a fixed gas turbine (GT) design are analyzed. The gas turbine is assumed to exist prior to the hybrid system design and all the other components such as the SOFC module and auxiliary parts are assumed to be newly designed for the hybrid system. The off-design operation of the GT is modeled by the performance characteristics of the compressor and the turbine. In the SOFC module, internal reforming with anode gas recirculation is adopted. Variations of both the hybrid system performance and operating condition of the gas turbine with the design temperature of the SOFC were investigated. Special focus is directed on the shift of the gas turbine operating points from the original points. It is found that pressure loss at the fuel cell module and other components, located between the compressor and the turbine, shifts the operating point. This results in a decrease of the turbine inlet temperature at each compressor operating condition relative to the original temperature for the GT only system. Thus, it is difficult to obtain the original GT power. Two cell voltage cases and various degrees of temperature difference at the cell are considered and their influences on the system design characteristics and performance are comparatively analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Williams · J. Power Sources · 2005 · 143 · 19110.1016/j.jpowsour.2004.12.003 ↗
2. B.H. Bae, J.L. Sohn, S.T. Ro, ASME Paper FUELCELL2003-1735.
3. Park · J. Power Sources · 2006 · 163 · 49010.1016/j.jpowsour.2006.09.036 ↗
4. Veyo · Trans. ASME: J. Eng. Gas Turbines Power · 2002 · 124 · 84510.1115/1.1473148 ↗
5. G.D. Agnew, M. Bozzolo, R.R. Moritz, S. Berenyi, ASME Paper GT2005-69122, 2005.
6. D. Bohn, N. Poppe, J. Lepers, ASME Paper GT-2002-30112, 2002.
7. S. Campanari, ASME Paper GT2004-53933, 2004.
8. E.A Liese, R.S. Gemmen, ASME Paper GT 2003-38566, 2003.
9. Yang · J. Power Sources · 2006 · 160 · 46210.1016/j.jpowsour.2006.01.018 ↗
10. Song · J. Power Sources · 2006 · 158 · 36110.1016/j.jpowsour.2005.09.031 ↗
11. D. Tucker, L. Lawson, R. Gemmen, ASME Paper GT2005-68784, 2005.
12. A. Hildebrandt, M. Assadi, ASME Paper GT2005-68744, 2005.
13. Dixon · 1978
14. Lee · J. Mech. Sci. Technol. · 2007 · 21 · 14110.1007/BF03161720 ↗
15. Nagata · Bull. Electrotechnol. Lab. Jpn. · 1993 · 5–6
16. Massardo · Trans. ASME: J. Eng. Gas Turbines Power · 2002 · 122 · 2710.1115/1.483187 ↗
17. Aspen Technology · 2004