journal article·2020-03

Parameter sensitivity analysis and cathode structure optimization of a non-aqueous Li–O2 battery model

Kai Jiang, Xunliang Liu, Guofeng Lou, Zhi Wen, Lin Liu

Publisher page

Abstract

Abstract Non-aqueous Li–O2 batteries have gained more attention and are promising power sources for next-generation electric vehicles due to their high energy density. In the present study, a comprehensive one-dimensional model is developed to investigate the performance of non-aqueous Li–O2 batteries. Two different models for insoluble discharge product growth are compared and the tunneling-effect model is in better agreement with the published experimental data. In order to evaluate the effects of various parameters on battery specific capacity in the model, the parameter sensitivity analysis is conducted under different current densities at a cutoff voltage of 2.4 V. The calculated average sensitivities are classified as three levels, including insensitive, sensitive, and very sensitive. The porosity of the cathode is found to be the most sensitive parameter to specific capacity. Based on this, a hierarchical porous cathode structure with gradient initial porosity distribution is proposed according to the distribution of cathode product and effective porosity. Our model shows that the hierarchical cathode structure can improve specific capacity by up to 10.38%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Nonaqueous Li–air batteries: a status report10.1021/cr500054y ↗
2. Theoretical energy density of Li–air batteries10.1149/1.2901961 ↗
3. Rechargeable Li2O2 electrode for lithium batteries10.1021/ja056811q ↗
4. The discharge rate capability of rechargeable Li–O2 batteries10.1039/c1ee01500a ↗
5. Reaction mechanisms for the limited reversibility of Li–O2 chemistry in organic carbonate electrolytes10.1016/j.jpowsour.2011.06.099 ↗
6. Inside the electrode: looking at cycling products in Li/O2 batteries10.1016/j.jpowsour.2018.12.088 ↗
7. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
8. Influence of the porous structure of the cathode on the discharge capacity of lithium-air batteries10.1149/2.0791713jes ↗
9. A review of cathode materials and structures for rechargeable lithium–air batteries10.1039/C5EE00838G ↗
10. Evolution of Li2O2 growth and its effect on kinetics of Li–O2 batteries10.1021/am5010943 ↗
11. A critical review of macroscopic modeling studies on Li-O2 and Li-air batteries using organic electrolyte: challenges and opportunities10.1016/j.jpowsour.2016.09.127 ↗
12. Lithium•Oxygen electrochemistry in non-aqueous solutions10.1002/ijch.201400135 ↗
13. Oxygen reactions in a non-aqueous Li+ electrolyte10.1002/anie.201100879 ↗
14. In operando spatiotemporal study of Li(2)O(2) grain growth and its distribution inside operating Li-O(2) batteries10.1002/cssc.201300822 ↗
15. Current density dependence of peroxide formation in the Li–O2 battery and its effect on charge10.1039/c3ee40697k ↗
16. Nucleation and growth of lithium peroxide in the Li–O2 battery10.1021/acs.nanolett.5b02149 ↗
17. Modeling discharge deposit formation and its effect on lithium-air battery performance10.1016/j.electacta.2012.04.137 ↗
18. Modelling of electrolyte degradation and cycling behaviour in a lithium–air battery10.1016/j.jpowsour.2013.06.043 ↗
19. Modeling of lithium–oxygen batteries with the discharge product treated as a discontinuous deposit layer10.1016/j.jpowsour.2014.09.103 ↗
20. Modeling study of a Li–O2 battery with an active cathode10.1016/j.energy.2014.12.062 ↗
21. Analysis of electrolyte level change in a lithium air battery10.1016/j.jpowsour.2015.12.092 ↗
22. A modeling study of the pore size evolution in lithium-oxygen battery electrodes10.1149/2.0921508jes ↗
23. Modelling the micro-macro homogeneous cycling behaviour of a lithium-air battery10.1016/j.jpowsour.2012.11.053 ↗
24. Mathematical modeling of oxygen crossover in a lithium-oxygen battery10.1016/j.apenergy.2019.04.124 ↗
25. Investigation of bi-porous electrodes for lithium oxygen batteries10.1016/j.electacta.2018.05.056 ↗
26. Balsara · 2019
27. Solubility of lithium salts formed on the lithium-ion battery negative electrode surface in organic solvents10.1149/1.3239850 ↗
28. Impact of the cathode microstructure on the discharge performance of lithium air batteries: a multiscale model10.1149/2.002408jes ↗
29. Characterization of the lithium/oxygen organic electrolyte battery10.1149/1.1498256 ↗
30. Oxygen reduction reaction catalyst on lithium/air battery discharge performance10.1039/c0jm04170j ↗
31. Ambient operation of Li/Air batteries10.1016/j.jpowsour.2010.01.022 ↗
32. The use of UV/vis absorption to measure diffusion coefficients in LiPF[sub 6] electrolytic solutions10.1149/1.2801378 ↗
33. The discharge rate capability of rechargeable Li–O2 batteries10.1039/c1ee01500a ↗
34. Optimization of nonaqueous electrolytes for primary lithium/air batteries operated in ambient environment10.1149/1.3168564 ↗
35. Some possible approaches for improving the energy density of Li-air batteries10.1149/1.3486114 ↗
36. Electrochemical characterisation and modelling of the mass transport phenomena in LiPF6–EC–EMC electrolyte10.1016/j.electacta.2008.04.023 ↗
37. Interface properties between a lithium metal electrode and a poly(ethylene oxide) based composite polymer electrolyte10.1016/S0378-7753(00)00587-5 ↗
38. Weaver · 2007 · 724
39. Selection of oxygen reduction catalysts for rechargeable lithium–air batteries—metal or oxide?10.1016/j.apcatb.2011.08.021 ↗
40. Sensitivity analysis of the modeling parameters used in simulation of proton exchange membrane fuel cells10.1109/TEC.2004.842382 ↗
41. Fundamental understanding and material challenges in rechargeable nonaqueous Li–O2 batteries: recent progress and perspective10.1002/aenm.201800348 ↗
42. Easily decomposed discharge products induced by cathode construction for highly energy-efficient lithium–oxygen batteries10.1021/acsami.9b01673 ↗
43. Small-angle neutron scattering studies of pore filling in carbon electrodes: mechanisms limiting lithium–air battery capacity10.1039/C9NR00190E ↗
44. Inside the electrode: looking at cycling products in Li/O2 batteries10.1016/j.jpowsour.2018.12.088 ↗
45. Triple hierarchical porous carbon spheres as effective cathodes for Li–O2 batteries10.1149/2.0021904jes ↗
46. Influence of the porous structure of the cathode on the discharge capacity of lithium-air batteries10.1149/2.0791713jes ↗
47. A gradient porous cathode for non-aqueous lithium-air batteries leading to a high capacity10.1016/j.elecom.2014.06.026 ↗
48. Numerical simulation of the factors affecting the growth of lithium dendrites10.1016/j.est.2019.100921 ↗
49. Exploring PVFM-based janus membrane-supporting gel polymer electrolyte for highly durable Li–O2 batteries10.1021/acsami.8b05393 ↗
50. Electrical conductivity in Li2O2 and its role in determining capacity limitations in non-aqueous Li-O2 batteries10.1063/1.3663385 ↗